1、 MS27622B 14 October 2009 SUPERSEDING MS27622A 29 September 2000 DETAIL SPECIFICATION SHEET SOCKET, HOSE COUPLING This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this spe
2、cification sheet and MIL-DTL-83296. FIGURE 1. Socket dimensions and configuration. AMSC N/A FSC 4730 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27622B 2 FIGURE 1. Socket dimensions and configuration - Continued. Provided by IHSNot f
3、or ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27622B 3 FIGURE 1. Socket dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27622B 4 PIN A .010 (0.25) inch (mm) B .005 (0.13) i
4、nch (mm) C .005 (0.13) inch (mm) D .005 (0.13) inch (mm) E .005 (0.13) inch (mm) F .005 (0.13) inch (mm) G .005 (0.13) inch (mm) MS27622-4C 1.025 (26.04) .485 (12.32) .155 (3.94) .825 (20.96) .750 (19.05) .580 (14.73) .750 (19.05) MS27622-6C 1.017 (25.83) .420 (10.67) .140 (3.56) .962 (24.43) .870 (
5、22.10) .690 (17.53) .870 (22.10) MS27622-8C 1.230 (31.24) .565 (14.35) .265 (6.73) 1.100 (27.94) .995 (25.27) .870 (22.10) .995 (25.27) MS27622-10C 1.271 (32.28) .530 (13.46) .155 (3.94) 1.375 (34.93) 1.243 (31.57) 1.032 (26.21) 1.243 (31.57) PIN H .005 (0.13) inch (mm) J inch (mm) K .005 (0.13) inc
6、h (mm) L .005 (0.13) inch (mm) M .005 (0.13) inch (mm) N .005 (0.13) inch (mm) P max inch (mm) MS27622-4C .750 (19.05) .750 (19.05) .386 (9.80) .030 (0.76) - - .395 (10.03) MS27622-6C .870 (22.10) .875 (22.23) .402 (10.21) - .635 (16.13) MS27622-8C .995 (25.27) 1.000 (25.40) .436 (11.07) .050 (1.27)
7、 .436 (11.07) - .400 (10.16) MS27622-10C 1.243 (31.57) 1.250 (31.75) .446 (11.33) - - FIGURE 1. Socket dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27622B 5 PIN Pg min. inch (mm) R basic inch (mm) S +.00
8、5 -.000 (+0.13) inch (mm) Thread T Pitch diameter inch (mm) MS27622-4C .310 (7.87) .5068 (12.873) .485 (12.32) .625-18UNJF-3B .5934/.5889 (15.0723/14.958) MS27622-6C .295 (7.49) .6030 (15.316) .585 (14.86) .750-16UNJF-3B .7143/.7094 (18.143/18.019) MS27622-8C .335 (8.51) .7868 (19.985) .755 (19.18)
9、875-24UNJS-3B .8519/.8479 (21.638/21.537) MS27622-10C .295 (7.49) - .894 (22.71) 1.063-20UNJ-3B 1.0344/1.0300 (26.274/26.162) PIN U V .015 inch (mm) W basic inch (mm) Y .005 (0.13) inch (mm) Z basic inch (mm) AA basic inch (mm) AB basic inch (mm) MS27622-4C 4 .25 .031 (.79) - .632 (16.05) .5388 (13
10、686) - .5488 (13.939) MS27622-6C 6 .6232 (15.829) .723 (18.36) .6362 (16.159) .6448 (16.378) .6718 (17.064) MS27622-8C 7 .030 (0.76) - .892 (22.66) .7983 (20.277) - - MS27622-10C .5 .037 (0.94) - 1.081 (27.46) .9762 (24.795) .9547 (24.249) .9870 (25.070) PIN AC .010 (0.25) inch (mm) AD .005 (0.13)
11、inch (mm) AE basic inch (mm) AF basic inch (mm) AG .005 (0.13) inch (mm) AH .005 (0.13) inch (mm) AJ .005 (0.13) inch (mm) MS27622-4C .070 (1.78) .632 (16.05) .0721 (1.831) .3308 (8.402) .015 (0.38) .410 (10.41) - MS27622-6C .074 (1.88) .723 (18.36) .0861 (2.187) .3013 (7.653) .435 (11.05) .490 (12.
12、45) MS27622-8C .071 (1.80) .898 (22.81) .0794 (2.017) .3220 (8.179) - - MS27622-10C .056 (1.42) 1.081 (27.46) .0424 (1.077) .3387 (8.603) .461 (11.71) .524 (13.31) FIGURE 1. Socket dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without
13、license from IHS-,-,-MS27622B 6 PIN AK .005 (0.13) inch (mm) AL 2 AM 2 AN 2 AP AR .005 (0.13) inch (mm) AS .5 MS27622-4C - 20 17 20 30 .5 - - MS27622-6C .642 (16.31) 16 45 45 - MS27622-8C - 10 10 60 - - MS27622-10C - 30 15 40 45 2 - .694 (17.63) PIN AT .005 (0.13 mm) inch(mm) AU 5 AV +.005 -.000 (+0
14、13) inch (mm) AW .005 (0.13) inch (mm) AY (inch (mm) MS27622-4C .555 (14.10) 15 - - .565 (14.35) +.008 -.000 (+0.20, -0.00) MS27622-6C .689 (17.50) - - .682 (17.32) +.009 -.000 (+0.23, -0.00) MS27622-8C .580 (14.73) - - .830 (21.08) +.007 -.000 (+0.18, -0.00) MS27622-10C - .914 (23.22) .578 (14.68)
15、 1.008 (25.60) +.008 -.000 (+0.20, -0.00) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances shall be .005 inch (0.13 mm). 4. Radius or break all corners to .005 +.005/-.000 inch (0.13 +.013/-.000 mm), unless otherwise
16、specified. 5. Surface roughness, as specified in ASME B46.1, shall not exceed 125 in Ra. 6. All burrs and slivers shall be removed. 7. Dimensioning and tolerancing are in accordance with ASME Y14.5M. FIGURE 1. Socket dimensions and configuration - Continued. REQUIREMENTS: Dimensions and configuratio
17、ns: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern. This part is a component of MS27616 through MS27618 and MS27629 through MS27631
18、 The item is only procured as an integral part of an adapter assembly. Material: Material shall be corrosion resistant steel, class 304, condition B, in accordance with ASTM A276 or ASTM A473. Sizes -4, -6, and -8 shall have a minimum yield of 70,000 psi (483 MPa) and size -10 shall have a minimum
19、yield of 60,000 psi (414 MPa). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27622B 7 Finish: Finish shall be passivated as specified in MIL-DTL-83296. PIN example: MS27622 -4 C PIN example: MS27622-4C indicates a socket 1/4 inch, CRES. Changes f
20、rom previous issue. Marginal notations are not used in this revision to identify changes due to the extent of the changes Referenced documents. In addition to MIL-DTL-83296, this document references the following: MS27616 MS27617 MS27618 MS27629 MS27630 MS27631 ASME B46.1 ASME Y14.5M ASTM A276 ASTM
21、A473 SAE-AS8879 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA - CC Navy - AS Air Force - 99 (Project 4730-2008-040) DLA - CC Review activities: Navy - MC, SA Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since o
22、rganizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Material (C for CRES) Dash size (see figure 1) Specification sheet number MS prefix Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
