1、MS33695A 9 July 2004 SUPERSEDING MS33695 17 December 1958 DETAIL SPECIFICATION SHEET CONTACTS, VIDEO COAXIAL CONNECTOR This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of thi
2、s specification sheet. NOTES: 1. Dimensions are in inches. 2. Unless otherwise specified, tolerance shall be .016 (.406 mm). FIGURE 1. Pin contact assembly, coaxial connector. AMSC N/A FSC 5935 INCH-POUND Inches mm .110 2.794 .125 3.175 .143 3.632 .188 4.775 .298 7.570 Provided by IHSNot for ResaleN
3、o reproduction or networking permitted without license from IHS-,-MS33695A 2FIGURE 2. Spring contact, shield conductor. FIGURE 3. Insulator. Inches mm Inches mm .003 .076 .217 5.512 .016 .406 .221 5.613 .030 .762 .248 6.300 .125 3.175 .252 6.401 .129 3.276 .391 9.931 .165 3.276 .422 10.720 Inches mm
4、 .070 1.778 .124 3.149 .127 3.226 .213 5.410 .216 5.486 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-MS33695A 3FIGURE 4. Pin contact, coaxial conductor. Inches mm Inches mm .005 .127 .121 3.073 .043 1.092 .125 3.175 .063 1.600 .156 3.962 .066 1.676
5、.422 10.718 .094 2.387 .119 3.022 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-MS33695A 4NOTES: 1. Dimensions are in inches. 2. Unless otherwise specified, tolerance shall be .016. FIGURE 5. Socket contact assembly, coaxial connector. Inches mm .188
6、 4.775 .375 14.300 .552 14.020 .572 14.528 .750 19.050 .768 19.507 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-MS33695A 5FIGURE 6. Socket, sleeve contact, shield conductor. Inches mm Inches mm .003 .076 .260 6.604 .008 .203 .283 7.188 .125 3.175 .2
7、89 7.340 .129 3.276 .438 11.125 .165 4.191 .552 14.020 .232 5.893 .572 14.528 .236 5.994 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-MS33695A 6FIGURE 7. Socket, insulator. FIGURE 8. Socket contact, coaxial conductor. Inches mm Inches mm .062 1.575
8、.188 4.775 .085 2.159 .228 5.791 .094 2.387 .231 5.867 .124 3.149 .438 11.125 .127 3.226 Inches mm Inches mm .018 .457 .119 3.022 .043 1.092 .121 3.073 .050 1.270 .125 3.175 .057 1.448 .156 3.962 .070 1.778 .375 9.525 .072 1.828 Provided by IHSNot for ResaleNo reproduction or networking permitted wi
9、thout license from IHS-,-MS33695A 7Requirements: Design and construction: See figures 1 through 8. Material: a. Pin contact and sleeve contact: Brass, hard, composition 22, in accordance with ASTM B121, ASTM B36, ASTM B16, ASTM B16M and ASTM B124. b. Spring contact and socket contact: In accordance
10、with ASTM B139. c. Insulator: Styramic HT, G.E. 1421 copolymer or DOW Q-200.5 copolymer. Finish: Metal parts, gold plate, .0002 inches (.0051 mm). Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of
11、 the changes. Reference documents. This document references the following: ASTM B16 ASTM B16M ASTM B36 ASTM B121 ASTM B124 ASTM B139 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 11 (Project 5935-4419-026) DLA - CC NOTE: The activities listed above were
12、 interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/www.dodssp.daps.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-
