DLA MS39232 REV B REINST NOTICE 3-2000 REDUCER PIPE RIGHT HAND THREAD (150 AND 300 POUNDS)《(150和300磅)右手螺纹变径管》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 44858-2-1978 Timer clocks having switching mechanism short-time signalling devices for household electric ranges characteristics of performance tests《家用电炉用定时器、设有开关装置的时钟、短暂信号显示装.pdf

DIN 44858-3-1978 Timer clocks having switching mechanism short-time signalling devices for household electric ranges characteristics of performance requirements《家用电炉用定时器、设有开关装置的时钟、.pdf

DIN 44871-1-1987 Electrical heating elements and heating inserts definitions《电子加热元件和加热镶件 定义》.pdf

DIN 44872-1991 Testing of electromagnesia《电熔氧化镁的试验》.pdf

DIN 44874-1-1991 Electrical metal-sheathed (tubular) heating elements calculation construction and requirements《金属护套(管状)电热元件 第2部分 计算、建造和要求》.pdf

DIN 44874-2-1976 Electrical tubular heating elements metal sheated 6 5 mm and 8 5 mm diameter terminals《直径为6 5mm 和8 5mm金属壳管状电加热元件 端子》.pdf

DIN 44874-3-1980 Electrical metal sheated tubular heating elements 6 5 mm and 8 5 mm diameter determination of ageing and overload characteristics《带金属护套的直径范围为 6 5 mm 和 8 5 mm 的管状电热.pdf

DIN 44875-1986 Electrical metal sheathed tubular heating elements use《带金属护套的管状电加热器 应用》.pdf

DIN 44876-1981 Hexagonal nipples for electrical tubular heating elements《管形电气加热元件的六角连接套管》.pdf