1、MS39325C INCH-POUND17 May 2006 SUPERSEDING MS39325B 22 October 2001 DETAIL SPECIFICATION SHEET HOSE ASSEMBLIES; AIR (TYPE I) AND VACUUM (TYPE II) BRAKE 3/8 INCH NOMINAL DIAMETER This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for
2、acquiring the product described herein shall consist of this specification sheet and MIL-DTL-3992. FIGURE 1. Hose assembly configurations. AMSC N/A FSC 4720 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS39325C 2 REQUIREMENTS Dimensions and hose c
3、onfiguration, type, and adapter shall be as specified on figure 1 and table I. TABLE I. Type, class, and style of hose assemblies. 1/ 2/ Nominal hose size (see MIL-DTL-3992) Type I Type II Dash Number Configuration Class 1 inch (mm) Class 2 inch (mm) Class 3 inch (mm) Style A inch (mm) Adapter MS391
4、33 dash number-01 A .375 (.953) -02 A .375 (9.53)-03 A .375 (9.53) -04 A .375 (9.53) -1 -05 A .375 (9.53) -06 A .375 (9.53) -07 A .375 (9.35 -08 A .375 (9.53) -09 B .375 (9.53) -10 B .375 (9.53) -11 B .375 (9.53) -2 1/ Dimensions are in inches 2/ Metric equivalents given for information only. The ho
5、se and hose assembly shall be in accordance with MIL-DTL-3992. The hose shall be replaceable from bulk supply. Fittings shall be in accordance with A-A-52484 or MS39133 see figure 1. Material/finish shall be as follows: Brass - none. Stainless steel - none. Steel fittings: a. Cadmium plated in accor
6、dance with SAE AMS-QQ-P-416, type II, class 2. b. Zinc plated in accordance with ASTM B633, type II, class 2 or SAE AMS-C-81562, type II, class 2. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS39325C 3 Part or Identifying Number (PIN): M 39325 -0
7、1 S 096 -2M prefixDash number in 1/8 inch for fractions of an inch (1 - 7) (See PIN examples). Assembly length in inches. Material/finish (see table II) Type, class, and style (see table I). Specification designator. TABLE II. Material/finish Material/finish designator Material/finish S Steel - cadm
8、ium plated Z Steel - zinc plated A Stainless steel B Brass Hose assembly length (see figure 1) shall be specified in inches. Insert a zero in front of designator for lengths less than 100 inches (see PIN examples). Fractions of an inch shall be specified in one eights (1/8) of an inch (example: 1 =
9、1/8, 2 = 2/8). PIN examples: M39325-04B096-4 in accordance with a MS39325 configuration A, type II, style A, 3/8 (.375 inch) (9.53 mm) nominal hose size, brass fittings, 96.5 inches long. M39325-10S120-5 in accordance with a MS39325 configuration B, type I, class 2, hose assembly 3/8 inch (.375 inch
10、) (9.53 mm) nominal hose size, steel (with cadmium plating) fittings, 120 and 5/8 inches long. -,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHSMS39325C 4 Table III shows the PIN cross-reference changes from revision A through revision C. TABLE III. C
11、ross-Reference data. MS39325A Pin MS39325B PIN MS39325C PIN M39325-1-xx-S MS39325-01S-xxx MS39325-01Sxxx-x M39325-2-xx-S MS39325-02S-xxx MS39325-02Sxxx-x M39325-3-xx-S MS39325-03S-xxx MS39325-03Sxxx-x M39325-4-xx-S MS39325-04S-xxx MS39325-04Sxxx-x M39325-5-xx-S MS39325-05S-xxx MS39325-05Sxxx-x M3932
12、5-6-xx-S MS39325-06S-xxx MS39325-06Sxxx-x M39325-7-xx-S MS39325-07S-xxx MS39325-07Sxxx-x M39325-8-xx-S MS39325-08S-xxx MS39325-08Sxxx-x M39325-9-xx-S MS39325-09S-xxx MS39325-09Sxxx-x M39325-10-xx-S MS39325-10S-xxx MS39325-10Sxxx-x M39325-10-xx-S MS3932511S-xxx MS39325-11Sxxx-x M39325-1-xx-B MS39325-
13、01B-xxx MS39325-01Bxxx-x M39325-2-xx-B MS39325-02B-xxx MS39325-02Bxxx-x M39325-3-xx-B MS39325-03B-xxx MS39325-03Bxxx-x M39325-4xx-B MS39325-04B-xxx MS39325-04Bxxx-x M39325-5-xx-B MS39325-05B-xxx MS39325-05Bxxx-x M39325-6-xx-B MS39325-06B-xxx MS39325-06Bxxx-x M39325-7-xx-B MS39325-07B-xxx MS39325-07B
14、xxx-x M39325-8-xx-B MS39325-08B-xxx MS39325-08Bxxx-x M39325-9-xx-B MS39325-09B-xxx MS39325-09Bxxx-x M39325-10-xx-B MS39325-10B-xxx MS39325-10Bxxx-x M39325-11-xx-B MS39325-11B-xxx MS39325-11Bxxx-x Changes from previous issue. Marginal notations are not used in this revision to identify changes with r
15、espect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-3992, this document references the following: A-A-52484 MS39133 ASTM B633 SAE AMS-C-81562 SAE AMS-QQ-P-416 Provided by IHSNot for ResaleNo reproduction or networking permitted without license
16、from IHS-,-,-MS39325C 5 CONCLUDING MATERIAL Custodians: Preparing activity Army - AT DLA - CC Navy - MC Air Force - 99 (Project 4720-2006-011) DLA - CC Review activities: Army - MI Navy - SA Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.milProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
