1、AMSC N/A FSC 5310 INCH-POUND MS51092C 15 August 2011 SUPERSEDING MS51092B 7 September 1971 DETAIL SPECIFICATION SHEET WASHER, FLAT This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein sh
2、all consist of this specification sheet. .625.390.062A .030 TIR-A-FIGURE 1. Washer, Flat. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51092C 2 NOTES: 1. Copper, specification ASTM B152/B152M, sheet, or strip, cold rolled annealed, 060 temper, R
3、ockwell B-55 max 3. Unless otherwise specified, dimensions are in inches; tolerances .010 on decimals. 3. Marking shall consist of the MS part number and manufacturers identification in accordance with MIL-STD-130. 4. For design feature purposes, this standard takes precedence over documents referen
4、ced herein. 5. Referenced documents shall be of the issue in effect on date of invitations for bid. 6. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. MILITARY INTEREST Preparing ac
5、tivity: DLA - IS Custodians: Air Force 99 (Project 5310-2011-010) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
