DLA MS51508 REV A VALID NOTICE 2-2013 Elbow Pipe to Tube 45 Degrees Male Pipe End 37 Degrees Flared [Use SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE.pdf

上传人:sofeeling205 文档编号:697458 上传时间:2019-01-02 格式:PDF 页数:1 大小:9.69KB
下载 相关 举报
DLA MS51508 REV A VALID NOTICE 2-2013 Elbow Pipe to Tube 45 Degrees Male Pipe End 37 Degrees Flared [Use SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE J514 SAE.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、MS DRAWINGElbow, Pipe to Tube, 45 Degrees, Male Pipe End, 37 DegreesFlared (use SAE-J514)MS51508A, dated 17-Aug-1999, remains inactive for new design;however, the document is valid for use.Reviewer Activities: Army - ATNavy - MCAir Force - 71NOTICE OFVALIDATIONINCH-POUNDMS51508ANOTICE 226-Feb-2013NO

2、TE: The activities above were interested in this document asof the date of this document. Since organizations andresponsibilities can change, you should verify the currency ofthe information above using the ASSIST Online database athttps:/assist.dla.mil.AMSC N/A FSC 4730Custodians:Army - ARNavy - OSAir Force - 99Preparing Activity:DLA - CCProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • DIN EN ISO 13802-2016 Plastics - Verification of pendulum impact-testing machines - Charpy Izod and tensile impact-testing (ISO 13802 2015 Corrected version 2016-04-01) German vers.pdf DIN EN ISO 13802-2016 Plastics - Verification of pendulum impact-testing machines - Charpy Izod and tensile impact-testing (ISO 13802 2015 Corrected version 2016-04-01) German vers.pdf
  • DIN EN ISO 13803-2015 Paints and varnishes - Determination of haze on paint films at 20 (ISO 13803 2014) German version EN ISO 13803 2014《色漆和清漆 20漆膜光泽度的测定》.pdf DIN EN ISO 13803-2015 Paints and varnishes - Determination of haze on paint films at 20 (ISO 13803 2014) German version EN ISO 13803 2014《色漆和清漆 20漆膜光泽度的测定》.pdf
  • DIN EN ISO 13805-2009 Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) (I.pdf DIN EN ISO 13805-2009 Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) (I.pdf
  • DIN EN ISO 13807-2009 Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry (ISO 13807 199.pdf DIN EN ISO 13807-2009 Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry (ISO 13807 199.pdf
  • DIN EN ISO 13833-2013 Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO.pdf DIN EN ISO 13833-2013 Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO.pdf
  • DIN EN ISO 13844-2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative press4.pdf DIN EN ISO 13844-2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative press4.pdf
  • DIN EN ISO 13845-2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal .pdf DIN EN ISO 13845-2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal .pdf
  • DIN EN ISO 13846-2001 Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leakti .pdf DIN EN ISO 13846-2001 Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leakti .pdf
  • DIN EN ISO 13849-1-2016 Safety of machinery - Safety-related parts of control systems - Part 1 General principles for design (ISO 13849-1 2015) German version EN ISO 13849-1 2015《机.pdf DIN EN ISO 13849-1-2016 Safety of machinery - Safety-related parts of control systems - Part 1 General principles for design (ISO 13849-1 2015) German version EN ISO 13849-1 2015《机.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1