1、I HOTES : CEO. SUP CLAIS 47 30 C 1 .“ 1. 2. 3. 4. MATERIAL: Steel, carbon in accordance with procurement specification. PROTECTIVE COATIkC: Cadmium plated in accordance with procurement specification. Steel corrosion-resisting in accordance with procurement specification. Zinc plated in accordance w
2、ith procurement specification, Phosphate coating in accordance with rocurement specification. Passivation treatment in accordance wfth procurement specification DIILENSIONS AND TOLERANCES: Dimensions and tolerances not shown shall be in accordance with the THRWDS: Thrfads shall be in accordance with
3、 Screw-Thread Standards for Federal Services, kndbook SAE Standard for 37 Degree Flared Fittin S (SAE 5514). 5. PART NU)(BER: The XS part nCber coashta of the WS number plus the dash number. nzm . A. Por cadmium plating use the US number, plus the dash number. B. For zinc plating add (2) to the dash
4、 number. hple: MS51518BZZ. C. For phosphate coating add (P) to the dqsh number. Example: US51518BZP. D. For corrosion-resistang steel, add (S) to the dash nmber. ISxmple: WS51518BZ. Lruple: WS5151BB2S. 6. Por design feature purposes, this standard takes precedence over procurement documents refer he
5、rein. 7. Reference documents shall be of the issue ia effect on date of invitations for bid. 8. The illustration is for identification purpose only and ia not intended to restrict desips g.After 17 January 1979 Wies will be used for production only and S- NOT *tacked for shapes not dimensioned. mintemnce. Existins stock of bodies should be used until depleted. *enced on I c) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
