1、 NUT-MS51823 SLEEVE -MS51825 DASH NUUBER TUBE B c3 D K K2 U u5 . O.D. STRAIGHT THREAD HEX DIA FLAT +.O15 +.O40 ASSY *BODY NOU CLASS SA OR 28 UAT DRILL -.O05 -.O20 2.03 2.06 NOTES: 1. UTERIAL: Steel, carbon in accordance with procurement specification. 2. AIOTECTm COATIN: hdium plated in accordance w
2、ith procurement specification. Steel, corrosion-resistin( in accordance with procurement specification. Zinc lated in accordance with procurement specification. Phosp&te catins in accordance with procurement specification, Passivation treatment in accordance with procurement specification. 3. DIWENS
3、IONS MD TOLERANCES: Dimensions and tolerrnces not shown shall be in accordance with SAE Standard for Flareless Tube FittinEs (su 5514). 4. 0 5. THREADS: PART NWlBER: The HS part number consists of the PIS number, plus the dash number and Threads shall be in accordance with Screw-Thread Standards for
4、 Federal Services, FED-STD-HZ8. (for complete assembly) the applicable MS51825 sleeve style designator. A. For complete assembly (with nut and sleeve), cadmium plated, use the MS number, plus the assembly dash number and the sleeve style designator. Example: MS51852-1A or MS51852-1B. B. For the body
5、 only, cadmium plated, use the MS number and the body dash number. Example: MS51852-2. C. For zinc coating add “Z“ and (for complete assembly) the sleeve style designator to the dash number. Example: MS51852-1ZA or MS51852-1ZB or MS51852-22. style designator to the dash number. Example: MSS1852-1PA
6、or E. For corrosion-resisting steel add “SS“ and (for complete assembly) D. For phosphate coating add “P“ and (for complete assembly) the sleeve MSS1852-1PB or ?1551852-2P. the sleeve style designator to the dash number. MS51852-1SSA or MS51852-1SSB or MS51852-2SS. Example: 6. 7. 8. lor design featu
7、re purporci, this standard takes precedence over procuracnt doclunts refer- enced herein. Reference docuentr rhll be of the issue in effect on &te of invitation. for bid. Ihe illurtration ir for identiiution and ir not intended to restrict deiignr or rhper mt dimensioned. * 9. After 22 HoVI974 for m
8、inteMnce. bodiei will be used for roductioa only and SHALL NOT be stocked Existi& rtock of bodies should le used until depleted, o Denotes change I MILITARY STANDARD I TITLE ELBOW, TUBE TO SWIVEL,SO:FLARELESS TYPE, HYDRAULIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
