1、MS51855 REV C Li7 W 9999922 OOL1046 T a A. AR kicd 99 tawEeMv YECIFYATI DA5H SIMBER B D G1 12 K K1 “3 w4 TLBL 0.D. STRAIGHT THREAD DIA DIA t.002 +.u15 ASSY *BODY SOM CLASS 2A DRILL -.O03 t.02 -.O05 5.020 1.33 ?.3 TITLE MI1 Il AIY Sl ANDAID ELBW,nJB,90,BW(mAD,FUFIELESS TYPE, MS51855 HYMIAULIC YCRYOES
2、 WET 1 Qc 1 SOTES: 1. UATERIAL: Steel, carbon in accordancc with procurement specification. 2. PROTECTIVE COATING: Cadmium plated in accordance with procurement specification. Steel, corrosion-resisting in accordance with procuremrnt specification. Zinc lated in accordance with procurement specifica
3、tion. Phospk te coatinE in accordance with procurement specification. Passivation treatment in accordance with procurement specification. 3. DIHECSIOCS AND TOLERAWCES: Dimensions and tolerances not shown shall be in accordance with SAE Standard for Flareless Tube Fittiws (SAE JSll). Threads shall be
4、 in accordance with Screw-Thread Standards for Federal Services, 04. THREADS: - FED-STD-HZB. 5. PART NUMBER: The MS-part number consists of the MS number, plus the dash number and (for complete assembly) the applicable MS51825 sleeve style designator. A. For complete assembly (with nuts and sleeves)
5、 cadmium plated, use the MS number, plus the assembly dash number and the sleeve style designator. Example: MS51855-1A or MS51855-1B. B. For body only, cadmium plated, use the MS number and the body dash number. Example: MS51855-2. C. For zinc coating add “2“ and (for complete assembly) the sleeve
6、style designator to the dash number. Example: MS51855-1ZA or MS51855-1ZB or For phosphate coating add “Pit and (for complete assembly) the sleeve style designator t the dash number. Example: MS51855-1PA or MS51855-1PB or For corrosion-resisting steel add “SS“ and (for complete assembly) the sleeve s
7、tyle designator to the dash number. Example: MS51855-1SSA or MS51855-1SSB or MS51855-2SS. For design feature purposes, this standard takes precedence over procurernent docuents rcfrr- enced herein. Reference docuents shall be of the issue in effect on date of invitations for bid. The illustration is
8、 for identification and is not intended to restrict designs or shapes not dimensioned. 9. After 22 NOV 1974 uintcmace. MS51855-22. D. MS51855-2P. E. 6. 7. B. , bodies vil1 be used for produciion only and SW NOT be rtocked for Existing stock of bdies should be used mtil dcp10c.d. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
