1、 DETAIL SPECIFICATION SHEET CAP, FUEL TANK TACTICAL VEHICLE, NONVENTED Inactive for new design after 22 January 1999. This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this
2、 specification sheet. FIGURE 1. Cap, fuel tanktactical vehicle. ASMC N/A FSC 2910 INCH-POUND MS53075C 09 May 2011 SUPERSEDING MS53075B 3 August 1990 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS53075C 2 Inches mm Inches mm Inches mm Inches mm .1
3、25 3.18 .500 12.70 .875 22.23 4.625 117.48 .250 6.35 .750 16.05 3.500 88.90 7.000 177.80 NOTES: 1. Dimensions are in inches. Tolerances are .010 on decimals, 3 on angles. 2. Metric equivalents are given for information only. 3. All dimensions are “reference” dimensions. 4. For design feature purpose
4、s, this standard takes precedence over acquisition documents referenced herein. 5. In the event of a conflict between the text of this specification sheet and the references cited herein, the text of this specification sheet shall take precedence. 6. This document is not intended to limit constructi
5、on to features other than as shown hereon by dimensions, notations or referenced documents. FIGURE 1. Cap, fuel tanktactical vehicle Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS53075C 3 REQUIREMENTS: This cap is of procurement specif
6、ication MIL-C-45300, Type III. The cap is to be used with necks specified in MS35644. The chain shall be in accordance with RR-C-271, Type II, Class 6. Protective coating: Interior parts shall be cadmium plated in accordance with SAE-AMS-QQ-P-416, Type II, Class 2, or zinc plated in accordance with
7、ASTM-B633, Type II, Fe/Zn 13 (sc 3) 12m minimum, as applicable. Cover surface shall be cleaned in accordance with the applicable method of TT-C-490, then treated with Type I or III. The surface shall then be primed in accordance with MIL-DTL-53030 and painted in accordance with MIL-DTL-53039. The ca
8、p shall withstand a minimum of 25 foot-pound torque without rotation of cup on inner plate or inner plate shell. The cap shall withstand 5 PSI external water pressure without leakage. Referenced documents shall be of the issue in effect on date of invitations for bid. For design feature purposes, th
9、is standard takes precedence over procurement documents referenced herein. This standard is not intended to limit construction to features other than as shown hereon by dimensions, notations or referenced documents. Part or Identifying Number (PIN). Example of a PIN: MS53075-1 Type of guide and neck
10、 (see figure 1) MS prefix and basic number Example of a PIN Style Former PIN MS53075-1 TABS 11681707 MS53075-2 KNURLED None Marking shall consist of the PIN and the manufacturers identification in accordance with MIL-STD-130. Changes from previous issue. Marginal notations are not used in this revis
11、ion to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. This document references the following: MIL-C-45300 MIL-DTL-53030 MIL-DTL-53039 MIL-STD-130 MS35644 RR-C-271 TT-C-490 ASTM-B633 SAE-AMS-QQ-P-416 Provided by IHSNot for ResaleNo reproduc
12、tion or networking permitted without license from IHS-,-,-MS53075C 4 CONCLUDING MATERIAL Custodians: Preparing activity: Army AT DLA CC Navy SH Air Force 99 (Project 2910-2010-007) DLA CC Review activities: Army AR, CR4 Navy MC, SA, YD Air Force 71 NOTE: The activities listed above were interested i
13、n this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
