1、 MS91604B 12 August 2003 SUPERSEDING MS91604A 2 December 1960 DETAIL SPECIFICATION SHEET CONNECTOR, PLUG, ELECTRICAL, SERIES LC, UG-154A/U This specification is approved for use by all Depart- ments and Agencies of the Department of Defense. The requirements for acquiring the product described herei
2、n shall consist of this specification and MIL-C-3650. FIGURE 1. General configuration. AMSC N/A 1 of 3 FSC 5935 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,
3、MS91604B 2 Bureau of Ships drawing No. or SAE No. Description Quantity REB10018-9 Gasket REB10027-2 Coupling nut REA10034-2 Spring REB10038-6 Washer REB10065-7 Clamp REB10079-3 Nut REB10080-3 Cap REB10348-2 Contact REB10868 Body SAE-AS28775 O ring 1 Inches mm 0.005 1.281 1.5 1.625 3.460 0.127 32.
4、53 38.1 41.27 87.88 NOTES: 1. Dimensions are in inches. 2. Stake to threads in four equally spaced places. 3. Metric equivalents are given for general information only. FIGURE 1. General configuration Continued. ENGINEERING INFORMATION: Impedance: 50 ohms. Voltage rating: 5,000 volts, peak. Frequenc
5、y range: 1 GHz. Engineering note: This is a weatherproof connector designed for use with RG-17/U and RG-18/U cable. For 10,000 volt operation, tool TL-326/U is required to counter bore cable. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS91604B 3
6、 REQUIREMENTS: Design and configuration: See figure 1. Part or Identifying Number (PIN): MS91604-154A. Dielectric withstanding voltage: Not applicable. CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 11 (Project 5935-4439-007) DLA - CC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
