1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Inactivate case outline 3 for new design. Reduce supply voltage tolerance to 5 percent. Editorial changes throughout. 88-12-24 Michael A. Frye B Update to reflect latest changes in format and requirements. Editorial changes throughout. -les 05-03
2、-10 Raymond Monnin C Update drawing as part of 5 year review. - jt 11-08-23 C. SAFFLE THE ORIGINAL FIRST PAGE OF THIS DRAWING HAS BEEN REPLACED. REV SHEET REV SHEET REV STATUS REV C C C C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 PMIC N/A PREPARED BY Todd D. Creek DLA LAND AND
3、MARITIME COLUMBUS, OHIO 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY Raymond Monnin APPROVED BY Michael A. Frye MICROCIRCUITS, DIGITAL, BIPOLAR, OCTAL BUS TRANSCEIV
4、ERS, MONOLITHIC SILICON DRAWING APPROVAL DATE 86-12-18 AMSC N/A REVISION LEVEL C SIZE A CAGE CODE 67268 5962-86868 SHEET 1 OF 13 DSCC FORM 2233 APR 97 5962-E231-11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5
5、962-86868 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying
6、 Number (PIN). The complete PIN is as shown in the following example: 5962-86868 01 R X Drawing number Device type (see 1.2.1) Case outline (see 1.2.2) Lead finish (see 1.2.3) 1.2.1 Device type. The device type identify the circuit function as follows: Device type Generic number Circuit function 01
7、8286 Octal bus transceiver, non-inverting 02 8287 Octal bus transceiver, inverting 1.2.2 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style R GDIP1-T20 or CDIP2-T20 20 dual-in-line 3 CQCC1-N28 28 leadless c
8、hip carrier X 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Supply voltage range -0.5 V dc to +7.0 V dc Input voltage -1.0 V dc to +5.5 V dc Output voltage . -0.5 V dc to +5.5 V dc Storage temperature range . -65C to +150C Maximum powe
9、r dissipation (PD) 1/ 1.0 W Lead temperature (soldering, 10 seconds) . +300C Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Junction temperature (TJ) +200C 1.4 Recommended operating conditions. Supply voltage . +4.75 V dc to +5.25 V dc Minimum high level input voltage (VIH) . 2.0 V dc
10、Maximum low level input voltage (VIL): A port 0.8 V dc B port 0.9 V dc Case operating temperature range (TC) -55C to +125C _ 1/ Maximum power dissipation is defined as VCCx ICC, and must withstand the added PDdue to short-circuit test; e.g., IOS. Provided by IHSNot for ResaleNo reproduction or netwo
11、rking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86868 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 3 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, sta
12、ndards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification f
13、or. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of
14、 these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cit
15、ed herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, append
16、ix A for non-JAN class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer Listing (QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-PRF-38535 may be processed as QML pro
17、duct in accordance with the manufacturers approved program plan and qualifying activity approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) plan may make modifications to the requirements herein. These modifications shall not affect form, fit, or fun
18、ction of the device. These modifications shall not affect the PIN as described herein. A “Q“ or “QML“ certification mark in accordance with MIL-PRF-38535 is required to identify when the QML flow option is used. 3.2 Design, construction, and physical dimensions. The design, construction, and physica
19、l dimensions shall be as specified in MIL-PRF-38535, appendix A and herein. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.2 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Truth table. The truth table shall be as specifie
20、d on figure 2. 3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3. 3.2.5 Test circuit and switching waveforms. The test circuit and switching waveforms shall be as specified on figure 4. 3.3 Electrical performance characteristics. Unless otherwise specified herein, the electric
21、al performance characteristics are as specified in table I and shall apply over the full case operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are described in table I.
22、 3.5 Marking. Marking shall be in accordance with MIL-PRF-38535, appendix A. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufa
23、cturer has the option of not marking the “5962-“ on the device. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86868 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 4 DSCC FORM 2234 AP
24、R 97 3.5.1 Certification/compliance mark. A compliance indicator “C” shall be marked on all non-JAN devices built in compliance to MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a “Q“ or “QML“ certification mark in accordance with MIL-PRF-38535 to identify when the QM
25、L flow option is used 3.6 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DLA Land and Maritime -VA prior to listing as an a
26、pproved source of supply shall affirm that the manufacturers product meets the requirements of MIL-PRF-38535, appendix A and the requirements herein. 3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits
27、 delivered to this drawing. 3.8 Notification of change. Notification of change to DLA Land and Maritime -VA shall be required for any change that affects this drawing. 3.9 Verification and review. DLA Land and Maritime, DLA Land and Maritimes agent, and the acquiring activity retain the option to re
28、view the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-868
29、68 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions -55C TC +125C 4.75 V VCC 5.25 V Group A subgroups Device type Limits Unit unless otherwise specified Min Max High level output vol
30、tage VOHB outputs, VCC= 4.75, IOH= -5 mA 1, 2, 3 All 2.4 V A outputs, VCC= 4.75, IOH= -1 mA 2.4 Low level output voltage VOLB outputs, VCC= 4.75, IOL= 20 mA 1, 2, 3 All 0.45 V A outputs, VCC= 4.75, IOL= 10 mA 0.45 Input clamp voltage VI CIIN= -5 mA 1, 2, 3 All -1 V High level input voltage VIH1/ 1,
31、2, 3 All 2.0 V Low level input voltage VIL1/ A port 1, 2, 3 All 0.8 V B port 0.9 Power supply current ICCVCC= 5.25 V 1, 2, 3 01 160 mA 02 130 Forward input current IFVCC= 5.25 V, VF= 0.45 V 1, 2, 3 All -200 A Reverse input current IRVCC= 5.25 V, VR= 5.25 V 1, 2, 3 All 50 A Output off current IOFFVCC
32、= 5.25 V, VOFF= 0.45 V 1, 2, 3 All -200 A VCC= 5.25 V, VOFF= 5.25 V 1, 2, 3 All 50 A Input capacitance CINVCC= 5.0 V, f = 1 MHz , VBIAS= 2.5 V, OE , T 4 All 12 pF TC= +25C, See 4.3.1c All others 25 Functional tests See 4.3.1d 7, 8 All See footnotes at end of table. Provided by IHSNot for ResaleNo re
33、production or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86868 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions -55C TC +
34、125C 4.75 V VCC 5.25 V Group A subgroups Device type Limits Unit unless otherwise specified Min Max Input to output delay 1/ tPLH,tPHLVCC= 5.0 V, (see figure 4) B outputs, IOL= 20 mA, IOH= -5 mA, CL= 300 pF 9, 10, 11 01 25 ns 02 35 Output disable time 1/ tPLZ, tPHZA outputs, IOL= 10 mA, 9, 10, 11 Al
35、l 25 ns Output enable time tPZL, tPZHIOH= -1 mA, CL= 100 pF 9, 10, 11 All 50 ns Output rise time tr0.8 V to 2.0 V (see figure 4) VCC= 5.0 V 9, 10, 11 All 20 ns Output fall time tf2.0 V to 0.8 V (see figure 4) VCC= 5.0 V 9, 10, 11 All 12 ns Transmit/receive setup time 1/ ts9, 10, 11 All 30 ns Transmi
36、t/receive hold time 1/ th9, 10, 11 All 25 ns 1/ Due to test equipment limitations, actual tested values may differ from those specified, but the specified limits are guaranteed. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DR
37、AWING SIZE A 5962-86868 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 7 DSCC FORM 2234 APR 97 Device type 01 02 Case outlines R 3 R 3 Terminal number Terminal symbol Terminal symbol 1 A0NC A0NC 2 A1A0A1A03 A2A1A2A14 A3NC A3NC 5 A4NC A4NC 6 A5A2A5A27 A6A3A6A38 A7A4A7A49 OE A5
38、OE A510 GND A6GND A611 T A7T A712 B7NC B 7 NC 13 B6OE B 6 OE 14 B5GND B 5 GND 15 B4NC B 4 NC 16 B3T B 3 T 17 B2B7B 2 B 7 18 B1NC B 1 NC 19 B0NC B 0 NC 20 VCCB6VCCB 6 21 - - - B5- - - B 5 22 - - - B4- - - B 4 23 - - - B3- - - B 3 24 - - - B2- - - B 2 25 - - - NC - - - NC 26 - - - B1- - - B 1 27 - - -
39、 B0- - - B 0 28 - - - VCC- - - VCC FIGURE 1. Terminal connections. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86868 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 8 DSCC FORM 2234
40、 APR 97 Inputs Conditions Chip disable 0 0 1 Transmit/Receive 0 1 X A Port Out In Hi-Z B Port In Out Hi-Z FIGURE 2. Truth table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86868 DLA LAND AND MARITIME COL
41、UMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 9 DSCC FORM 2234 APR 97 FIGURE 3. Logic diagram. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86868 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LE
42、VEL C SHEET 10 DSCC FORM 2234 APR 97 FIGURE 3. Logic diagram - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86868 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 11 DSCC F
43、ORM 2234 APR 97 FIGURE 4. Test circuit and switching waveforms. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-86868 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 12 DSCC FORM 2234 A
44、PR 97 4. VERIFICATION 4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38535, appendix A. 4.2 Screening. Screening shall be in accordance with method 5004 of MIL-STD-883, and shall be conducted on all devices prior to quality conformance inspection.
45、 The following additional criteria shall apply: a. Burn-in test, method 1015 of MIL-STD-883. (1) Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision level control and shall be made available to the preparing or acquiring activity upon reques
46、t. The test circuit shall specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in method 1015 of MIL-STD-883. (2) TA= +125C, minimum. b. Interim and final electrical test parameters shall be as specified in table II herein, except interim
47、 electrical parameter tests prior to burn-in are optional at the discretion of the manufacturer. TABLE II. Electrical test requirements. MIL-STD-883 test requirements Subgroups (in accordance with MIL-STD-883, method 5005, table I) Interim electrical parameters (method 5004) - Final electrical test
48、parameters (method 5004) 1*, 2, 3, 7, 8, 9, 10, 11 Group A test requirements (method 5005) 1, 2, 3, 4, 7, 8, 9, 10, 11 Groups C and D end-point electrical parameters (method 5005) 2, 8A, 10 * PDA applies to subgroup 1. 4.3 Quality conformance inspection. Quality conformance inspection shall be in accordance with method 5005 of MIL-STD-883 including groups A, B, C, and D inspections. The following additi
