1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Add device type 03. Changed drawing to reflect MIL-H-38534 processing. 91-01-28 W. Heckman B Add case outline Y. Rewrite entire document. 93-05-06 K. A. Cottongim C Changes in accordance with NOR 5962-R161-95. 95-06-16 K. A. Cottongim D Changes i
2、n accordance with NOR 5962-R156-97. 96-12-20 K. A. Cottongim E Update drawing to current requirements of MIL-PRF-38534. 06-02-09 Raymond Monnin REV SHEET REV SHEET REV STATUS REV E E E E E E E E E E E E E E OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Steve Duncan DEFENSE SU
3、PPLY CENTER COLUMBUS STANDARD MICROCIRCUIT DRAWING CHECKED BY Robert M. Heber POST OFFICE BOX 3990 COLUMBUS, OHIO 43218-3390 http:/www.dscc.dla.mil THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY William K. Heckman MICROCIRCUIT, HYBRID, LINEAR, RESOLVER OR SYNCHRO-TO-DIGITAL CONVERT
4、ER AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 88-11-08 AMSC N/A REVISION LEVEL E SIZE A CAGE CODE 67268 5962-87687 SHEET 1 OF 14 DSCC FORM 2233 APR 97 5962-E262-06Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRC
5、UIT DRAWING SIZE A 5962-87687 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents one product assurance class, class H (high reliability) and a choice of case outlines and lead finishes are available and a
6、re reflected in the Part or Identifying Number (PIN). 1.2 PIN. The PIN shall be as shown in the following example: 5962-87687 01 X X Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type(s). The device type(s) shall identify the circuit function as
7、 follows: Device type Generic number Circuit function Accuracy (1.0 LSB) 01 HSDC-8920A, RDC14505-638 400 Hz resolver to digital converter 2.6 arc minutes 02 HSDC-8920, RDC14505-639 400 Hz resolver to digital converter 4.0 arc minutes 03 RDC14505-641 400 Hz resolver to digital converter, 2.6 arc minu
8、tes 6 volt input 1.2.2 Case outline(s). The case outline(s) shall be as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style X See figure 1 36 Dual-in-line Y See figure 1 36 Dual-in-line 1.2.3 Lead finish. The lead finish shall be as specified in M
9、IL-PRF-38534. 1.3 Absolute maximum ratings. 1/ Supply voltage (VS) +18 V dc Logic supply voltage (VL) . +15 V dc Reference input 130 V rms Digital inputs -0.3 V dc to VL Power dissipation (PD) . 270 mW 2/ Storage temperature range -65C to +150C Lead temperature (soldering, 10 seconds). +300C Thermal
10、 resistance, junction-to-case (JC) . 8.0C/W Thermal resistance, junction-to-ambient (JA) 28C/W Junction temperature (TJ) 150C 1.4 Recommended operating conditions. Supply voltage (VS) +11 V dc to +16.5 V dc Logic supply voltage (VL) . +4.5 V dc to +15 V supply Ambient operating temperature range (TA
11、) -55C to +125C 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitat
12、ion or contract. 1/ Stresses above the absolute maximum ratings may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Power dissipation applies up to TA= +125C. Provided by IHSNot for ResaleNo reproduction or networking
13、permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87687 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 3 DSCC FORM 2234 APR 97 DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38534 - Hybrid Microcircuits, General Specification for. DEPARTME
14、NT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard for Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these d
15、ocuments are available online at http:/assist.daps.dla.mil/quicksearch/ or http:/assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing an
16、d the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item performance requirements for device class
17、H shall be in accordance with MIL-PRF-38534. Compliance with MIL-PRF-38534 may include the performance of all tests herein or as designated in the device manufacturers Quality Management (QM) plan or as designated for applicable device class. The manufacturer may eliminate, modify or optimize the te
18、sts and inspections herein, however the performance requirements as defined in MIL-PRF-38534 shall be met for the applicable device class. In addition, the modification in the QM plan shall not affect the form, fit, or function of the device for the applicable device class. 3.2 Design, construction,
19、 and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38534 and herein. 3.2.1 Case outline(s). The case outline(s) shall be in accordance with 1.2.2 herein and figure 1. 3.2.2 Terminal connections. The terminal connections shall be as specified
20、on figure 2. 3.2.3 Block diagram. The block diagram shall be as specified on figure 3. 3.2.4 Digital angle outputs. The digital angle outputs shall be as specified on figure 4. 3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics a
21、re as specified in table I and shall apply over the full specified operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking of device(s). Ma
22、rking of device(s) shall be in accordance with MIL-PRF-38534. The device shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers vendor similar PIN may also be marked. 3.6 Data. In addition to the general performance requirements of MIL-PRF-38534, the manufacturer of the de
23、vice described herein shall maintain the electrical test data (variables format) from the initial quality conformance inspection group A lot sample, for each device type listed herein. Also, the data should include a summary of all parameters manually tested, and for those which, if any, are guarant
24、eed. This data shall be maintained under document revision level control by the manufacturer and be made available to the preparing activity (DSCC-VA) upon request. 3.7 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to supply to this drawing. Th
25、e certificate of compliance (original copy) submitted to DSCC-VA shall affirm that the manufacturers product meets the performance requirements of MIL-PRF-38534 and herein. 3.8 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38534 shall be provided with each lot of mi
26、crocircuits delivered to this drawing. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87687 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 4 DSCC FORM 2234 APR 97 TABLE I. El
27、ectrical performance characteristics. Limits Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device types Min Max Unit Resolution control 14 bits fail/pass 7,8 All Output accuracy Measured at angles of 0, 15, 30, 45, 60, 75, 90, 105, 120, 135, 150, 165, 180, 225,
28、 270, and 315 degrees 7,8 All 2/ Reference Input Input voltage range 3/ VIN 4,5,6 All 4.0 130 V rms Carrier frequency 3/ 4,5,6 All 360 1000 Hz Single ended 250 Input impedance 3/ ZINREFDifferential 4,5,6 All 500 k Common mode voltage range 3/ VCMREF4,5,6 All -210 210 V (pk) Signal Input Common mode
29、range 3/ VCMSIG4,5,6 All -60 60 V (pk) Differential 46 Line to line 23 Input impedance 3/ ZINSIGEach line to ground 4,5,6 All 23 k 01,02 10.62 12.98 Line to line input voltage 3/ VINL-L 4,5,6 03 5.40 6.60 V rms See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking
30、 permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87687 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Limits Test Symbol Conditions 1/ -55C TA +125C
31、unless otherwise specified Group A subgroups Device types Min Max Unit Digital Outputs (Bits 1 through 14 and CB) VOLLogic 0, 1 TTL load 4/ at -1.6 mA 1,2,3 All 0.4 V dc VOHLogic 1, 10 TTL load 4/ at 0.4 mA 1,2,3 All 2.8 V dc Drive capability IXHigh impedance load 1,2,3 All -10 +10 A Converter busy
32、CB Positive pulse 9,10,11 All 0.5 2.5 s Analog Output Ac error e For 1.0 LSB change, near null to ground 4,5,6 All 12.8 19.2 mV rms/ LSB DC velocity voltage o At 2.1 rps 4,5,6 All 0.8 1.2 V dc Filtered dc error 3/ E Per + LSB of error 4,5,6 All -1.2 0.8 V dc Full scale max, positive direction 4,5,6
33、All 3.72 5.70 V dc Velocity 3/ 5/ v Full scale max, negative direction 4,5,6 All -3.73 -5.70 V dc See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87687 DEFENSE SUPPLY CENTER COL
34、UMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Limits Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device types Min Max Unit Digital Inputs (INH, EN 1 through 6, EN 7
35、through14, and digital bits 1 through 14 while operating in CT mode) VILLogic 0, VL= 5.0 V dc 1,2,3 All 1.5 V dc Voltage inputs 4/ VIHLogic 1, VL= 5.0 V dc 1,2,3 All 3.5 V dc Loading 4/ ILOADInternal pull up 1,2,3 All -1.0 -10 A Inhibit 6/ INH 7,8 All Enable bits 1 through 6 7/ EM 7,8 All Enable bit
36、s 7 through 14 7/ EL 7,8 All Set 8/ S 7,8 All Power Supplies Supply current ISLogic = 0, VS= +16.5 V dc 1,2,3 All 25 mA Logic supply current ILVL= +15 V dc 1,2,3 All 1.0 mA 1/ +11 V dc VS +16.5 V dc and +4.5 V dc VL +15 V supply. 2/ Output accuracy for device types 01 and 03 is 2.6 arc minutes 1.0 L
37、SB, and output accuracy for device type 02 is 4.0 arc minutes 1.0 LSB. 3/ Parameter shall be tested as part of device initial characterization and after design and process changes. Parameter shall be guaranteed to the limits specified in table I for all lots not specifically tested. 4/ Test on a go-
38、no-go basis in conjunction with other tested parameters and not directly testable. 5/ Test is performed at full speed of 10 rps. 6/ Test should verify no digital angles change while INH is logic 0 and analog input is rotating. 7/ Test should verify logic 0 enables, logic 1 high impedance. 8/ Test sh
39、ould verify logic 0 for use in CT mode. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87687 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 7 DSCC FORM 2234 APR 97 Case outli
40、ne X. Inches mm Inches mm .005 0.13 .100 2.54 .010 0.25 .210 5.33 .015 0.38 .240 6.10 .018 0.46 .600 15.24 .055 1.40 .775 19.69 .086 2.18 1.700 43.18 .090 2.29 1.895 48.13 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Lead identification numbers
41、 are for reference only. 4. Lead spacing dimensions apply only at seating plane. FIGURE 1. Case outline(s). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87687 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO
42、43218-3990 REVISION LEVEL E SHEET 8 DSCC FORM 2234 APR 97 Case outline Y. Millimeters Inches Symbol Minimum Maximum Minimum Maximum A - 5.33 - .210 b 0.41 0.51 .016 .020 c 0.41 0.51 .016 .020 D - 48.26 - 1.900 E - 20.32 - .800 e 2.54 BSC .100 BSC eA 15.11 15.37 .595 .605 L 6.10 6.60 .240 .260 Q - 0.
43、72 .030 S1 2.18 2.44 .086 .096 X 43.18 BSC 1.700 BSC NOTES: 1. This item was designed using inch-pound units of measurement. In case of problems involving conflicts between the metric and inch-pound units, the inch-pound units shall rule. 2. Pin numbers are for reference only. 3. Lead clusters to be
44、 located within (0.005) 1.27 mm of case center line. FIGURE 1. Case outline(s) - Continued.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87687 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISI
45、ON LEVEL E SHEET 9 DSCC FORM 2234 APR 97 Device type All Device type All Case outlines X and Y Case outlines X and Y Terminal number Terminal symbol Terminal number Terminal symbol 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 S1 S2 S3 S4 Bit 1 (MSB) Bit 2 Bit 3 Bit 4 Bit 5 Bit 6 Bit 7 Bit 8 Bit 9 Bi
46、t 10 Bit 11 Bit 12 Bit 13 Bit 14 LSB 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 RH (Ref. High) RL (Ref. Low) N. C. E (Filtered DC Error Out) o (Analog Velocity Out) CB (Converter busy) EN 7-14 (Enable, Bits 7 to 14) EN 1-6 (Enable, Bits 1 to 6) e (AC Error Out) VL (Logic Voltage Input) GN
47、D S Ge (Gain Control) +15 V (Power Supply In) INH (Inhibit) V (Internal DC Ref.) BC (Buffered Cos) BC (Buffered Sin)NOTE: BS and BC pins are used in other applications. FIGURE 2. Terminal connections. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87687 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 10 DSCC FORM 2234 APR 97 FIGURE 3. Block diagram. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,
