1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Drawing updated to reflect current requirements. Editorial changes throughout. -drw 01-04-30 Raymond Monnin B Make correction to the limits for IIH(receiver section) and tPLZ(driver section) in table I. -rrp 05-10-28 Raymond Monnin C Update drawi
2、ng as part of 5 year review. jt 11-11-09 C. SAFFLE THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED. REV SHEET REV C SHEET 15 REV STATUS REV C C C C C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Joseph A. Kerby DLA LAND AND MARITIME COLUMBUS, OHI
3、O 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY D. H. Johnson APPROVED BY Michael A. Frye MICROCIRCUIT, LINEAR, DIFFERENTIAL LINE TRANSCEIVERS, MONOLITHIC SILICON DR
4、AWING APPROVAL DATE 88-07-20 AMSC N/A REVISION LEVEL C SIZE A CAGE CODE 67268 5962-88511 SHEET 1 OF 15 DSCC FORM 2233 APR 97 5962-E038-12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-88511 DLA LAND AND MAR
5、ITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complet
6、e PIN is as shown in the following example: 5962-88511 01 E A Drawing number Device type (see 1.2.1) Case outline (see 1.2.2) Lead finish (see 1.2.3) 1.2.1 Device types. The device types identify the circuit function as follows: Device type Generic number Circuit function 01 55116 Differential line
7、transceivers with three-state receiver output circuitry 02 55117 Differential line transceivers with three-state receiver output circuitry 03 55118 Differential line transceivers with three-state receiver output circuitry 04 55119 Differential line transceivers with three-state receiver output circu
8、itry 1.2.2 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16 16 Dual-in-line P GDIP1-T8 or CDIP2-T8 8 Dual-in-line 2 CQCC1-N20 20 Square leadless chip carrier 1.2.3 Lead finish. Th
9、e lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Supply voltage (VCC) +7 V dc Input voltage (VI): DA, DB, DE, DI, RE, RS . +5.5 V dc RA, RB, RT (device types 01 and 03) 25 V dc A and B (device types 02 and 04) 0 V dc to 6 V dc Off-state voltage (device types
10、01 and 03) 12 V dc Storage temperature range -65C to +150C Maximum power dissipation: 1/ Case E . 1375 mW Case P . 1050 mW Case 2 1375 mW Lead temperature (soldering, 10 seconds) 300C Junction temperature (TJ) +150C 1/ Must withstand the added PDdue to short circuit test, e.g., IOS. For operation ab
11、ove 25C free air temperature, derate linearly at the rate of 11 mW/C for cases E and 2, and 8.5 mW/C for case P. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-88511 DLA LAND AND MARITIME COLUMBUS, OHIO 4321
12、8-3990 REVISION LEVEL C SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings Continued. Thermal resistance, junction-to-ambient (JA): Cases E and 2 91C/W Case P . 119C/W Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 1.4 Recommended operating conditions. Ambient operating tempera
13、ture range (TA) -55C to +125C Operating supply voltage range (VCC) 4.5 V dc to 5.5 V dc Receiver input voltage (VI): Device types 01 and 03 -15 V dc to +15 V dc Device types 02 and 04 0 V dc to 6 V dc 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following speci
14、fication, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Sp
15、ecification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawing
16、s. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the r
17、eferences cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-
18、38535, appendix A for non-JAN class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer Listing (QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-PRF-38535 may be process
19、ed as QML product in accordance with the manufacturers approved program plan and qualifying activity approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) plan may make modifications to the requirements herein. These modifications shall not affect form
20、, fit, or function of the device. These modifications shall not affect the PIN as described herein. A “Q“ or “QML“ certification mark in accordance with MIL-PRF-38535 is required to identify when the QML flow option is used. Provided by IHSNot for ResaleNo reproduction or networking permitted withou
21、t license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-88511 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 4 DSCC FORM 2234 APR 97 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-
22、38535, appendix A and herein. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.2 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Truth tables. The truth tables shall be as specified on figure 2. 3.2.4 Function diagrams. The
23、function diagrams shall be as specified on figure 3. 3.2.5 Waveforms. The waveforms shall be as specified on figure 4. 3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are as specified in table I and shall apply over the full a
24、mbient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are described in table I. 3.5 Marking. Marking shall be in accordance with MIL-PRF-38535, appendix A. The part s
25、hall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. 3.5.1 Certification/com
26、pliance mark. A compliance indicator “C” shall be marked on all non-JAN devices built in compliance to MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a “Q“ or “QML“ certification mark in accordance with MIL-PRF-38535 to identify when the QML flow option is used. 3.6 C
27、ertificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DLA Land and Maritime -VA prior to listing as an approved source of supply sh
28、all affirm that the manufacturers product meets the requirements of MIL-PRF-38535, appendix A and the requirements herein. 3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing.
29、 3.8 Notification of change. Notification of change to DLA Land and Maritime -VA shall be required for any change that affects this drawing. 3.9 Verification and review. DLA Land and Maritime, DLA Land and Maritimes agent, and the acquiring activity retain the option to review the manufacturers faci
30、lity and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-88511 DLA LAND AND MARITIME CO
31、LUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Driver section Input clamp voltage VIKVCC= 4.5 V, II= -12 mA 1,
32、 2, 3 All -1.5 V High level output voltage VOH VCC= 4.5 V, IOH= -10 mA 1 All 2.4 V VIL= 0.8 V, IOH= -10 mA 2, 3 2 VIH= 2.0 V IOH= -40 mA 1.8 Low level output voltage VOLVCC= 4.5 V, VIH= 2.0 V, VIL= 0.8 V, IOL= 40 mA 1, 2, 3 All 0.4 V Output clamp voltage VOKVCC= 5.5 V, IO= -40 mA, DE at 0.8 V 1, 2,
33、3 All -1.5 V Off-state open-collector output current IO(OFF)VCC= 5.5 V, TA= +25C 1 01, 03 10 A VO= 12 V TA= +125C 2 200 Off-state (high impedance) output current IOZVCC= 5.5 V, VO= 0 V to VCCDE at 0.8 V, TA= +25C 1 01, 03 10 A VCC= 5.5 V, DE at 0.8 V VO= 0 V 2 -300 TA= +125C VO= 0.4 V to VCC 2 150 I
34、nput current at maximum input voltage Driver or enable input IIVCC= 5.5 V VI= 5.5 V 1, 2, 3 All 1 mA High level input current IIHVI= 2.4 V 40 A Low level input current IILVI= 0.4 V -1.6 mA Short circuit output 2/ IOS VCC= 5.5 V, VO= 0 V 1 All -40 -120 mA current 2, 3 04 -40 -130 Supply current (driv
35、er and ICCVCC= 5.5 V 1 All 60 mA receiver combined) 2, 3 04 70 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-88511 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEV
36、EL C SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Receiver section Differential input high-threshold voltage VTHVCC= 4.5 V 4/ VO= 0.4 V,
37、IOL= 15 mA 6/ 1, 2, 3 All 0.5 V 3/ VCC= 5 V 5/ 1 Differential input low-threshold voltage VTLVCC= 4.5 V 4/ VO= 2.4 V, IOL= -5 mA 6/, 7/ 1, 2, 3 All -0.5 V 3/ VCC= 5 V 5/ -1 Input voltage range VIVCC= 5 V, 1, 2, 3 01, 03 15 to -15 V 8/ VID= -1 V or 1 V 6/ 02, 04 6 to 0 High level output voltage VOHIO
38、H= -5 mA 6/ VCC= 4.5 V, VID= -0.5 V 4/ 1, 2, 3 All 2.4 V VCC= 5.0 V, VID= -1.0 V 5/ Low level output voltage VOLIOL= 15 mA 6/ VCC= 4.5 V, VID= 0.5 V 4/ 1, 2, 3 All 0.4 V VCC= 5.0 V, VID= 1.0 V 5/ Receiver input current II(REC) VCC= VI= 0 V, other input at 0 V 1, 2, 3 01, 03 -0.9 mA 5.5 V 02, 04 -1 6
39、/ VI= 0.4 V, other input at 2.4 V 01, 03 -0.7 02, 04 -0.8 VI= 2.4 V, other input at 0.4 V 01, 03 0.3 02, 04 0.4 Input current at maximum input Strobe IIVCC= 4.5 V, VID= -0.5 V, VSTROBE= 4.5 V 1, 2, 3 01, 02 5 A voltage Enable VCC= 5.5 V, VI= 5.5 V 03, 04 1 mA High level input current Enable IIHVCC=
40、5.5 V, VI= 2.4 V 1, 2, 3 03, 04 45 A See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-88511 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 7 DSCC FORM 223
41、4 APR 97 TABLE I. Electrical performance characteristics continued. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Receiver section Low level current input Strobe IILVCC= 5.5 V, VID= 0.5 V, VSTROBE= 0.4 V 4/ 1, 2, 3 01, 02 -2.4 mA
42、 Enable VCC= 5.5 V, VI= 0.4 V 03, 04 -1.6 Response-time-control current (RTC) I(RC) VCC= 5.5 V, VID= 0.5 V, RC at 0V, TA= +25C 4/ 1 01, 03 -1.2 mA Off-state open-collector output current IO(OFF) VCC= 5.5 V, VO= 12 V, TA= +25C 1 01, 03 10 A VID= -1 V TA= +125C 2 200 Off-state (high impedance) output
43、current IOZVCC= 5.5 V, VO= 0 V TA= +25C 1 03, 04 10 A to VCC, RE at 0.4 V TA= +125C 2 150 Line terminating resistance RTVCC= 5 V, TA= +25C 1 01, 03 77 167 Short circuit output current IOSVCC= 5.5 V, VO= 0 V, 1 All -15 -80 mA 2/ VID= -1 V 4/ 2, 3 04 -1 -100 Supply current (driver and ICCVCC= 5.5 V, V
44、ID= 0.5 V 4/ 1 All 60 mA receiver combined) 2, 3 04 70 Propagation delay time low to high level output tPLHVCC= 5 V, CL= 30 pF, TA= +25C, RL= 400 9 All 75 ns Propagation delay time high to low level output tPHL75 ns Output enable time to high level tPZHSee figure 4 RL= 480 9 03, 04 20 ns Output enab
45、le time to low level tPZLRL= 250 35 ns Output disable time from high level tPHZRL= 480 30 ns Output disable time from low level tPLZRL= 250 35 ns See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRA
46、WING SIZE A 5962-88511 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 8 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Driv
47、er section Propagation delay time low to high level output tPLHVCC= 5 V, CL= 30 pF, TA= +25C, 9 All 30 ns Propagation delay time high to low level output tPHL30 ns Output enable time to high level tPZHSee figure 4 RL= 180 20 ns Output enable time to low level tPZLRL= 250 40 ns Output disable time fr
48、om high level tPHZRL= 180 30 ns Output disable time from low level tPLZRL= 250 40 ns 1/ Unless otherwise noted, VSTROBE= 2.4 V. All parameters with the exception of off-state open-collector output current are measured with the active pull-up connected to the sink output. 2/ Not more than one output should be shorted at a time and, duration of the short circuit should not exceed 1 second. 3/ Differential voltages are at the B input terminal with respect to the A input termina
