DLA SMD-5962-90766 REV E-2013 MICROCIRCUIT LINEAR RS-485 QUAD DIFFERENTIAL LINE RECEIVER MONOLITHIC SILICON.pdf
《DLA SMD-5962-90766 REV E-2013 MICROCIRCUIT LINEAR RS-485 QUAD DIFFERENTIAL LINE RECEIVER MONOLITHIC SILICON.pdf》由会员分享,可在线阅读,更多相关《DLA SMD-5962-90766 REV E-2013 MICROCIRCUIT LINEAR RS-485 QUAD DIFFERENTIAL LINE RECEIVER MONOLITHIC SILICON.pdf(18页珍藏版)》请在麦多课文档分享上搜索。
1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes in accordance with N.O.R. 5962-R204-93. 93-08-13 M. A. FRYE B Redrawn with changes. Add device types 03 and 04. Add vendor CAGE 01295. Editorial changes throughout. 94-06-20 M. A. FRYE C Drawing updated to reflect current requirements. -
2、ro 03-03-20 R. MONNIN D Sheet 5, VOLtest, conditions for device types 03 and 04, correct “VCC= 4.5 V” to “VCC= 4.75 V”. Editorial changes throughout. drw 04-04-14 R. MONNIN E Update drawing to current MIL-PRF-38535 requirement. -jt 13-07-15 C. SAFFLE THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN
3、 REPLACED. REV SHEET REV E E SHEET 15 16 REV STATUS REV E E E E E E E E E E E E E E OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY RICK C. OFFICER DLA LAND AND MARITIME STANDARD MICROCIRCUIT DRAWING CHECKED BY CHARLES E. BESORE COLUMBUS, OHIO 43218-3990 http:/www.landandmariti
4、me.dla.mil THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY MICHAEL A. FRYE MICROCIRCUIT, LINEAR, RS-485, QUAD DIFFERENTIAL LINE RECEIVER, MONOLITHIC AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 90-10-18 SILICON AMSC N/A REVISION LEVEL E SIZE A CAGE CODE 67268 5962
5、-90766 SHEET 1 OF 16 DSCC FORM 2233 APR 97 5962-E463-13 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90766 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 2 DSCC FORM 2234 APR 97 1.
6、SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When availab
7、le, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 90766 01 M E A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2) Device class designator Case outline (see 1.2.4) Lead fin
8、ish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and
9、 are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device types. The device types identify the circuit function as follows: Device type Generic number Circuit function 01 96F175 RS-485 quad differential line receiver 02 96F173 RS-485 quad differential line
10、receiver 03 55LBC175 RS-485 quad differential line receiver, low power 04 55LBC173 RS-485 quad differential line receiver, low power 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements docu
11、mentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outlines. The case outlines are as designated in MIL-STD-1835 and a
12、s follows: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16 16 Dual-in-line F GDFP2-F16 or CDFP3-F16 16 Flat pack 2 CQCC1-N20 20 Square leadless chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PR
13、F-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90766 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximu
14、m ratings. 1/ Supply voltage (VCC) 7.0 V dc Input voltage, A or B inputs (VIN) 25 V dc Differential input voltage (VID) 25 V dc Low level output current (IOL): Device types 01 and 02 . 50 mA Enable input voltage (VEN) . 7.0 V dc 2/ Storage temperature range . -65C to +150C Lead temperature (solderin
15、g, 60 seconds): Cases E and F . +300C Case 2 . +260C Junction temperature (TJ) . +150C Power dissipation (PD): Cases E and 2 . 1375 mW 3/ Case F . 1000 mW 3/ Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Thermal resistance, junction-to-ambient (JA): Case E . 100 mW/C Case F . 145 mW/C
16、 Case 2 . 90 mW/C 1.4 Recommended operating conditions. Operating supply voltage range (VCC): Device types 01 and 02 . 4.5 V dc to 5.5 V dc Device types 03 and 04 . 4.75 V dc to 5.25 V dc Ambient operating temperature range (TA) -55C to +125C Common mode input voltage (VCM) . -7 V dc to +12 V dc Out
17、put current high (IOH): Device types 01 and 02 . -400 A Device types 03 and 04 . 8 mA Output current low (IOL): Device types 01 and 02 . 11 mA 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this dra
18、wing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. _ 1/ Stresses above the absolute maximum
19、rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ VENapplies to device types 02 and 04 only. 3/ Derate above 25C at 11 mW/C for case outlines E and 2 and at 8 mW/C for case outline F. Provided by IHSNot for Re
20、saleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90766 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 4 DSCC FORM 2234 APR 97 DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MI
21、L-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at http:/quicksearch.dla.mil/ or from the Standard
22、ization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes a
23、pplicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Manage
24、ment (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, constructi
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DLASMD596290766REVE2013MICROCIRCUITLINEARRS485QUADDIFFERENTIALLINERECEIVERMONOLITHICSILICONPDF

链接地址:http://www.mydoc123.com/p-699862.html