1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes in accordance with NOR 5962-R109-93. 93-03-23 M. A. Frye B Changes in accordance with NOR 5962-R186-93. 93-06-14 M. A. Frye C Incorporate revisions A and B. Update drawing to current requirements. Editorial changes throughout. - drw 06-03
2、-07 Raymond Monnin THE FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED. REV SHET REV SHET REV STATUS REV C C C C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 PMIC N/A PREPARED BY Joseph A. Kerby DEFENSE SUPPLY CENTER COLUMBUS STANDARD MICROCIRCUIT DRAWING CHECKED BY Charles E. Besor
3、e COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY Michael A. Frye MICROCIRCUIT, LINEAR, 12-BIT D/A AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 91-09-20 CONVERTER, MONOLITHIC SILICON AMSC N/A REVISION LEVEL C SIZE A
4、 CAGE CODE 67268 5962-91652 SHEET 1 OF 13 DSCC FORM 2233 APR 97 5962-E258-06 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91652 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHE
5、ET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identify
6、ing Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 91652 01 M J A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase
7、outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendi
8、x A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device types. The device types identify the circuit function as follows: Device type Generic number Circuit function 01 TDC1112-1 12-bit D/A converter, 0.048% ELD02 TDC1112-2 12-
9、bit D/A converter, 0.024% ELD1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level
10、 B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outlines. The case outlines are as designated in MIL-STD-1835 as follows: Outline letter Descriptive designator Terminals Package style J GDIP1-T24 or CDIP2-T24 24 Dual-in
11、-line 3 CQCC1-N28 28 Square leadless chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD
12、 MICROCIRCUIT DRAWING SIZE A 5962-91652 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Supply voltages: VEEA(measured to AGND) . -7.0 V to +0.5 V VEEA(measured to VEED) -50 mV to +50 mV VEED(measured to DGND) .
13、 -7.0 V to +0.5 V AGND(measured to DGND). -0.5 V to +0.5 V Inputs: CONV, CONV , FT, D1-12(measured to DGND) 2/ VEEDto +0.0 V REF+, REF-, applied voltage (measured AGND) 2/ . VEEAto +0.0 V REF+, REF-, applied current, externally forced 3/, 4/ 3 mA Digital input current, externally forced 3/, 4/. 3 mA
14、 Outputs: OUT+, OUT-, applied voltage (measured to AGND) 2/ -2.0 V to +2.0 V OUT+, OUT-, applied current externally forced, (measured to AGND) 3/, 4/ 50 mA Short-circuit duration (single output to GND). Unlimited Storage temperature range . -60C to +150C Junction temperature (TJ) +200C Lead temperat
15、ure (soldering, 10 seconds) +300C Power dissipation (PD) 1.6 W Thermal resistance, junction-to-case (JC) See MIL-STD-1835 1.4 Recommended operating conditions. Clock frequency (fCLK) . 0 Hz to 50 MHz Analog supply voltage (VEEA) (measured to AGND). -4.9 V to -5.5 V Analog supply voltage (VEEA) (meas
16、ured to VEED). -20 mV to -+20 mV Digital supply voltage (VEED) (measured to DGND) . -4.9 V to -5.5 V Analog ground voltage (VAGND) (measured to DGND) . -0.1 V to +0.1 V Reference voltage range (measured at REF-) -0.7 V to -1.3 V Reference current range (measured at REF+) 0.575 mA to 0.675 mA Compens
17、ation capacitor (CC) 0.01 F minimum Digital input voltage, logic LOW (VIL). -1.6 V maximum Digital input voltage, logic HIGH (VIH) . -1.0 V minimum Input data setup time (tS). 18 ns minimum Input data hold time (tH) 0 ns minimum Setup time, data to FT (tSF). 7 ns maximum Hold time, data to FT (tHF).
18、 24 ns maximum CONV input voltage, common mode range (VICM). -0.5 V to -2.0 V CONV input voltage, differential (VIDF) 0.4 V to -1.2 V CONV pulse width, low (tPWL): 40 MSPS 10.5 ns minimum 40 MSPS 11 ns minimum CONV pulse width, high (tPWH): 40 MSPS 8.5 ns minimum 40 MSPS 9.0 ns minimum Case operatin
19、g temperature range (TC) -55C to +125C 1/ Absolute maximum ratings are limiting values applied individually while all other parameters are within specified operating conditions. Functional operation under any of these conditions is not implied. Device performance and reliability are guaranteed only
20、if the operating conditions are not exceeded. 2/ Applied voltage must be current limited to specified range. 3/ Forcing voltage must be limited to specified range. 4/ Current is specified as conventional current flowing into the device. Provided by IHSNot for ResaleNo reproduction or networking perm
21、itted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91652 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 4 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, stan
22、dards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification fo
23、r. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of
24、these documents are available online at http:/assist.daps.dla.mil/quicksearch/ or http:/assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this dra
25、wing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q a
26、nd V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall b
27、e in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535
28、, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Truth table. The truth table shall be as specified on figure 2. 3.2.4 Block diagr
29、am. The Block diagram shall be as specified on figure 3. 3.2.5 Waveforms and load circuit. The waveforms and load circuit shall be as specified on figure 4. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance
30、characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full case operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are
31、 defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5
32、962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. Provided by IHSNot for ResaleNo reproducti
33、on or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91652 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions -55C TC +125C unless
34、 otherwise specified Group A subgroups Device type Limits Unit Min MaxSupply current IEEA+ IEEDVEEA= VEED= -5.5 V 1/ 1, 3 All -195 mA 2 -145 Reference input capacitance 2/ CREFTC= +25C, see 4.4.1b 4 All 15 pF Digital input capacitance 2/ CITC= +25C, see 4.4.1b 4 All 15 pF Output capacitance 2/ COVOU
35、T= VEE= 0 V, f = 1 MHz, TC= +25C, see 4.4.1b 4 All 45 pF Digital input current, logic LOW IILVEED= -5.5 V, VI= -1.85 V 1, 2, 3 All -10 250 A Digital input current, logic HIGH IIHVEED= -5.5 V, VI= -0.8 V 1, 2, 3 All -10 250 A CONV input current IICVEED= -5.5 V, -1.85 V VI -0.8 V 1, 2, 3 All 50 A Outp
36、ut resistance 2/ ROIREF= 0.675 mA 1, 2, 3 All; 12 k Output compliance voltage 2/ VOCIREF= 0.675 mA 1, 2, 3 All -1.2 1.2 V Full-scale output current IOVEEA= VEED= -5.2 V 1, 2, 3 All 40 mA Maximum clock rate 2/, 3/, 4/ FSVEEA= VEED= -4.9 V, FT = 0.8 V, see figure 4 4, 5, 6 All 50 MSPS Clock to output
37、delay 2/, 4/ tDCVEEA= VEED= -4.9 V, FT = 0.8 V, see figure 4 9, 10, 11 All 20 ns Data to output delay 2/, 4/ tDDVEEA= VEED= -4.9 V, FT = 2.0 V, see figure 4 9, 10, 11 All 25 ns FT to output delay 2/, 4/ tDFVEEA= VEED= -4.9 V, see figure 4 9, 10, 11 All 30 ns Output rise time 2/, 4/ tr90% to 10% of F
38、SR, FT = 0.8 V 9, 10, 11 All 4 ns Output fall time 2/, 4/ tf10% to 90% of FSR, FT = 0.8 V 9, 10, 11 All 4 ns Output voltage settling time 2/ tSETFT = 0.8 V, worst case full-scale voltage transition on OUT- to 0.0188% of FS (3/4 LSB), see figure 4 9, 10, 11 All 35 ns See footnotes at end of table. Pr
39、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91652 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - co
40、ntinued. Test Symbol Conditions -55C TC +125C unless otherwise specified Group A subgroups Device type Limits Unit Min MaxLinearity error, differential 6/ ELDVEEA= VEED= -5.2 V, IREF= 0.625 mA 4, 5, 6 01 -0.048 +0.048 % 02 -0.024 +0.024 Linearity error, integral terminal based 6/ ELIVEEA= VEED= -5.2
41、 V, IREF= 0.625 mA 4, 5, 6 All -0.048 +0.048 % Absolute gain error EGVEEA= VEED= VREF= -5.2 V 1, 2, 3 All -5 +5 % Output offset current IOFVEEA= VEED= -4.9 V, D1-12= 0.8 V 1, 2, 3 All -5 +5 A REF+ to REF- offset VOSVEEA= VEED= -5.5 V 1, 2, 3 All -10 +10 mV REF- input bias current 2/ IBVEEA= VEED= -5
42、.5 V 1, 2, 3 All 10 A Power supply rejection ratio 2/ PSRR VEEA= VEED= -5.2 V, VEEAand VEEDripple = 0.6 Vp-p, f = 120 Hz, IREF= 0.625 mA dB relative to 0.6 Vp-p ripple input 4, 5, 6 All -48 dB Power supply sensitivity PSS VEEA= VEED= 4% of -5.2 V, IREF= 0.625 mA 4, 5, 6 All -140 A/V Peak glitch area
43、 2/, 7/ GA4, 5, 6 All 45 pV-sec 1/ Worst case over all data and control states. 2/ Guaranteed if not tested to the limits specified. 3/ FSis limited only by tPWL, tPWH, tS, and tHrequirements. 4/ Clocked mode. 5/ Feedthrough mode. 6/ OUT- connected to AGND, OUT+ driving virtual ground. 7/ Worst case
44、 1 LSB transition. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91652 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 7 DSCC FORM 2234 APR 97 Device types 01 and 02 Case out
45、lines J 3 Terminal number Terminal symbol 1 D9VEEA2 D10REF-3 D11REF+ 4 D12(LSB) COMP 5 AGNDVEED6 OUT+ D77 OUT- D88 DGNDD99 D6 1010 D5D1111 D4 12(LSB) 12 D3NC 13 D2AGND14 D1(MSB) OUT+ 15 CONV OUT- 16 CONV NC 17 FT DGND18 VEEANC 19 REF- D620 REF+ D521 COMP D422 VEEDD323 D7 224 D8D1(MSB) 25 - - - NC 26
46、 - - - CONV 27 - - - CONV 28 - - - FT FIGURE 1. Terminal connections. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91652 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 8 DS
47、CC FORM 2234 APR 97 INPUT CODING TABLE Input Data D1-12OUT+ (mA) VOUT+ (mV) OUT- (mA) VOUT- (mV) MSB LSB 0000 0000 0000 0.000 0.00 40.000 -1000.00 0000 0000 0001 0.009 -0.24 39.990 -999.75 0000 0000 0010 0.019 -0.49 39.980 -999.52 0111 1111 1111 19.995 -499.88 20.005 -500.12 1000 0000 0000 20.005 -5
48、00.12 19.995 -499.88 1111 1111 1101 39.980 -999.52 0.019 -0.49 1111 1111 1110 39.990 -999.75 0.009 -0.24 1111 1111 1111 40.000 -1000.00 0.000 0.00 NOTE: 1. IREF= 625 A, RLOAD= 25. FIGURE 2. Truth table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-91652 DEFENSE SUPPLY CENTER COL
