1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes are in accordance with the notice of revision 5962-R138-93. - jak 93-04-14 Monica L. Poelking B Changes are in accordance with the notice of revision 5962-R105-94. - tvn 94-08-02 Monica L. Poelking C Changes are in accordance with the not
2、ice of revision 5962-R165-96. - jak 96-06-28 Monica L. Poelking D Incorporate previous notice of revisions. Update the boilerplate to the current requirements of MIL-PRF-38535. - jak 08-04-09 Thomas M. Hess REV SHET REV D D D D D SHEET 15 16 17 18 19 REV STATUS REV D D D D D D D D D D D D D D OF SHE
3、ETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Joseph A. Kerby STANDARD MICROCIRCUIT DRAWING CHECKED BY Thomas J. Ricciuti DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY Monica L. Poelk
4、ing AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 93-03-30 MICROCIRCUIT, DIGITAL, FAST CMOS, OCTAL TRANSCEIVER/REGISTER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON AMSC N/A REVISION LEVEL D SIZE A CAGE CODE 67268 5962-92223 S
5、HEET 1 OF 19 DSCC FORM 2233 APR 97 5962-E258-08 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92223 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 2 DSCC FORM 2234 APR 97 1.
6、 SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When availa
7、ble, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 92223 01 M K A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Lead fini
8、sh (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and
9、are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01, 02 54FCT646T Octal transceiver/register with three-state outputs, TTL compatible i
10、nputs and limited output voltage swing 03, 04 54FCT646AT Octal transceiver/register with three-state outputs, TTL compatible inputs and limited output voltage swing 05, 06 54FCT646CT Octal transceiver/register with three-state outputs, TTL compatible inputs and limited output voltage swing 1.2.3 Dev
11、ice class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MI
12、L-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style K GDFP3-F24 or CDFP4-T24 24 Flat pack L GDIP3-T24 or CDIP4-T24 24
13、 Dual-in-line 3 CQCC1-N28 28 Leadless-chip-carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDAR
14、D MICROCIRCUIT DRAWING SIZE A 5962-92223 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ 2/ 3/ . Supply voltage range (VCC) . -0.5 V dc to +7.0 V dc DC input voltage range (VIN) -0.5 V dc to VCC+ 0.5 V dc 4/ DC
15、output voltage range (VOUT) -0.5 V dc to VCC+ 0.5 V dc 4/ DC input clamp current (IIK) (VIN= -0.5 V ) -20 mA DC output clamp current (IOK) (VOUT-0.5 V and +7.0 V) 20 mA DC output source current (IOH) (per output) -30 mA DC output sink current (IOL) (per output) . +70 mA DC VCCcurrent (ICC) . 260 mA
16、Ground current (IGND) +550 mA Storage temperature range (TSTG) -65C to +150C Case temperature under bias (TBIAS) -65C to +135C Maximum power dissipation (PD) 500 mW Lead temperature (soldering, 10 seconds) +300C Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Junction temperature (TJ) .
17、 +175C 1.4 Recommended operating conditions. 2/ 3/ Supply voltage range (VCC) +4.5 V dc to +5.5 V dc Input voltage range (VIN) +0.0 V dc to VCCOutput voltage range (VOUT) . +0.0 V dc to VCCMaximum low level input voltage (VIL) . 0.8 V Minimum high level input voltage (VIH) . 2.0 V Case operating tem
18、perature range (TC) . -55C to +125C Maximum input rise or fall rate (t/V): (from VIN= 0.3 V to 2.7 V, 2.7 V to 0.3 V) 5 ns/V Maximum high level output current (IOH) -12 mA Maximum low level output current (IOL) 48 mA 1/ Stresses above the absolute maximum rating may cause permanent damage to the dev
19、ice. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Unless otherwise noted, all voltages are referenced to GND. 3/ The limits for the parameters specified herein shall apply over the full specified VCCrange and case temperature range of -55C to +125C. 4/
20、For VCC 6.5 V, the upper limit on the range is limited to 7.0 V. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92223 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 4 DSCC FO
21、RM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitati
22、on or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEF
23、ENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch/ or www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, B
24、uilding 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific e
25、xemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan sh
26、all not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construct
27、ion, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections
28、shall be as specified on figure 1. 3.2.3 Truth table. The truth table shall be as specified on figure 2. 3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3. 3.2.5 Ground bounce load circuit and waveforms. The ground bounce load circuit and waveforms shall be as specified on fig
29、ure 4. 3.2.6 Switching waveforms and test circuit. The switching waveforms and test circuit shall be as specified on figure 5. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradi
30、ation parameter limits are as specified in table I and shall apply over the full case operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. Provided
31、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92223 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 5 DSCC FORM 2234 APR 97 3.5 Marking. The part shall be marked with the PIN listed i
32、n 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall
33、 still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required
34、 in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of t
35、his drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of
36、 supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as requir
37、ed for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2 herei
38、n) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DSCC, DSCCs agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documen
39、tation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 37 (see MIL-PRF-38535, appendix A).Provided by IHSNot for ResaleNo
40、 reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92223 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Limits 3/ Test and MIL-STD-883 t
41、est method 1/ Symbol Test conditions 2/ -55C TC +125C +4.5 V VCC +5.5 V unless otherwise specified Device type VCCGroup A subgroups Min Max Unit VOH14/ For all inputs affecting output under test VIN= 2.0 V or 0.8 V For all other inputs VIN= VCCor GND IOH= -300 A All 4.5 V 1, 2, 3 3.0 VCC-0.5 V High
42、level output voltage 3006 VOH2For all inputs affecting output under test VIN= 2.0 V or 0.8 V For all other inputs VIN= VCCor GND IOH= -12 mA All 4.5 V 1, 2, 3 2.4 VCC-0.5 V VOL14/ For all inputs affecting output under test VIN= 2.0 V or 0.8 V For all other inputs VIN= VCCor GND IOL= 300 A All 4.5 V
43、1, 2, 3 0.20 V Low level output voltage 3007 VOL2For all inputs affecting output under test VIN= 2.0 V or 0.8 V For all other inputs VIN= VCCor GND IOL= 48 mA All 4.5 V 1, 2, 3 0.55 V 1, 2 0.1 01, 03, 05 3 10.0 1, 2 0.1 Three-state output leakage current high 3021 IOZH5/ 6/ G = VIHor VILVIH= 2.0 V,
44、VIL= 0.8 V For all other inputs, VIN = VCCor GNDVOUT= VCC02, 04, 06 5.5 V 3 2.0 A 1, 2 -1.0 01, 03, 05 3 -10.0 1, 2 -0.1 Three-state output leakage current low 3020 IOZL5/ 6/ G = VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs, VIN = VCCor GNDVOUT= GND 02, 04, 06 5.5 V 3 -2.0 A For input under
45、test, IIN= -18 mA 01, 03, 05 -1.2 Negative input clamp voltage 3022 VIC-For input under test, IIN= -15 mA 02, 04, 06 4.5 V 1, 2, 3 -1.3 V See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZ
46、E A 5962-92223 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Limits 3/ Test and MIL-STD-883 test method 1/ Symbol Test conditions 2/ -55C TC +125C +4.5 V VCC +5.5 V unless otherwise
47、 specified Device type VCCGroup A subgroups Min Max Unit 1, 2 1.0 control inputs 3 5.0 A 1, 2 1.0 I/O pins 01, 03, 05 5.5 V 3 15.0 A 1, 2 0.1 control inputs 3 1.0 A 1, 2 0.2 Input current high 3010 IIHFor input under test, VIN= VCCFor all other inputs, VIN= VCCor GND I/O pins 02, 04, 06 5.5 V 3 3.0
48、A 1, 2 -1.0 control inputs 3 -5.0 A 1, 2 -1.0 I/O pins 01, 03, 05 5.5 V 3 -15.0 A 1, 2 -0.1 control inputs 3 -1.0 A 1, 2 -0.2 Input current low 3009 IILFor input under test, VIN= GND For all other inputs, VIN= VCCor GND I/O pins 02, 04, 06 5.5 V 3 -3.0 A pF Input capacitance 3012 CIN7/ See 4.4.1c TC= +25C All GND 4 10 All pF Input/output capacitance 3012 CI/O7/ See 4.4.1c TC= +25C GND 4 12 Short circuit output current 3005 IOS8/ For all inputs, VIN= VCCor GND VOUT= GND All 5.5 V 1, 2, 3 -60 -225 mA Dynamic power supply current ICCD4/ 9/ Outputs open All 5.5 V 4, 5, 6 0.2
