1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes IAW NOR 5962-R023-97 tvn. 96-10-17 Monica L. Poelking B Redrawn with changes. Update the boilerplate to the current requirements of MIL-PRF-38535. - jak 08-05-13 Thomas M. Hess C Correct figure 1, terminal connections. - jak 10-11-10 Thom
2、as M. Hess REV SHEET REV C C C C C SHEET 15 16 17 18 19 REV STATUS REV C C C C C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Joseph A. Kerby DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil STANDARD MICROCIRCUIT DRAWING CHECKED BY Tha
3、nh V. Nguyen THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY Monica L. Poelking MICROCIRCUIT, DIGITAL, FAST CMOS, 16-BIT BUFFER/LINE DRIVER WITH NONINVERTING THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 94-03-22 LIMITED
4、OUTPUT VOLTAGE SWING, MONOLITHIC SILICON AMSC N/A REVISION LEVEL C SIZE A CAGE CODE 67268 5962-92257 SHEET 1 OF 19 DSCC FORM 2233 APR 97 5962-E067-11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92257 DLA
5、LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead
6、finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 92257 01 M X A Federal stock class designator RHA designator
7、(see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Leadfinish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Dev
8、ice class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit func
9、tion 01 54FCT16244T 16-bit buffer/line driver with noninverting three-state outputs, TTL compatible inputs and limited output voltage swing 02 54FCT16244AT 16-bit buffer/line driver with noninverting three-state outputs, TTL compatible inputs and limited output voltage swing 03 54FCT16244CT 16-bit b
10、uffer/line driver with noninverting three-state outputs, TTL compatible inputs and limited output voltage swing 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor se
11、lf-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outlin
12、e letter Descriptive designator Terminals Package style X GDFP1-F48 48 Flat pack 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted withou
13、t license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92257 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ 2/ 3/ Supply voltage range (VCC) -0.5 V dc to +7.0 V dc DC input voltage range (VIN) -0.5 V dc to VCC
14、+ 0.5 V dc 4/ DC output voltage range (VOUT) . -0.5 V dc to VCC+ 0.5 V dc 4/ Input clamp current (IIK) (VIN= -0.5V) . -20 mA Output clamp current (IOK) (VOUT= -0.5V and+7.0 V) 20 mA DC output source current (IOH) per output -30 mA DC output sink current (IOL) per output . +70 mA DC VCCcurrent (ICC)
15、. 480 mA DC ground current (IGND) 1120 mA Storage temperature range (TSTG) . -65C to +150C Case temperature under bias (TBIAS) . -65C to +135C Maximum power dissipation (PD) . 1.0 W Lead temperature (soldering, 10 seconds) +300C Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Junction t
16、emperature (TJ) +175C 1.4 Recommended operating conditions. 2/ 3/ Supply voltage range (VCC) +4.5 V dc to +5.5 V dc Input voltage range (VIN) +0.0 V dc to VCCOutput voltage range (VOUT) . +0.0 V dc to VCCMaximum low level input voltage(VIL). 0.8 V Maximum high level input voltage (VIH) 2.0 V Case op
17、erating temperature range (TC) . -55C to +125C Maximum input rise or fall rate (t/V): (from VIN= 0.3 V to 2.7 V, 2.7 V to 0.3 V) 2.5 ns/V Maximum high level output current (IOH) -24 mA Maximum low level output current (IOL) 48 mA 1/ Stresses above the absolute maximum rating may cause permanent dama
18、ge to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Unless otherwise noted, all voltages are referenced to GND. 3/ The limits for the parameters specified herein shall apply over the full specified VCCrange and case temperature range of -55C
19、to +125C. 4/ For VCC 6.5 V, the upper limit on the range is limited to 7.0 V. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92257 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 4 DSC
20、C FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue
21、 of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method
22、 Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.daps.d
23、la.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document
24、, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manuf
25、acturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein.
26、 This drawing has been modified to allow the manufacturer to use the alternate die/fabrication requirements of paragraph A.3.2.2 of MIL-PRF-38535 or other alternative approved by the Qualifying Activity. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimens
27、ions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on
28、 figure 1. 3.2.3 Truth table. The truth table shall be as specified on figure 2. 3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3. 3.2.5 Ground bounce load circuit and waveforms. The ground bounce load circuit and waveforms shall be as specified on figure 4. 3.2.6 Switching w
29、aveforms and test circuit. The switching waveforms and test circuit shall be as specified on figure 5. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92257 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REV
30、ISION LEVEL C SHEET 5 DSCC FORM 2234 APR 97 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full ca
31、se operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the ma
32、nufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for dev
33、ice classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance
34、 mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. For class Q product built in accordance with A.3.2.2 of MIL-PRF-38535 or other alternative approved by the Qualifying Activity, the “QD” certification mark shall be used in place of the “QML” or “Q” certification mark.
35、 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufactu
36、rer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DLA land and maritime-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q
37、and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A
38、 shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DLA land and maritime -VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that a
39、ffect this drawing. 3.9 Verification and review for device class M. For device class M, DLA land and maritime, DLA land and maritime s agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made
40、available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 37 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted withou
41、t license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92257 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test and MIL-STD-883 test method 1/ Symbol Test conditions 2/ -55C TC +125C +4.5 V VC
42、C +5.5 V unless otherwise specified Devicetype VCCGroup A subgroups Limits 3/ Unit Min Max High level output voltage 3006 VOH14/ For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs VIN= VCCor GND IOH= -300 A All 4.5 V 1, 2, 3 3.0 VCC-0.5 V VOH2For al
43、l inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs VIN= VCCor GND IOH= -3 mA All 4.5 V 1, 2, 3 2.5 VCC-0.5VOH34/ For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs VIN= VCCor GND IOH= -12 mA All 4.5 V 1,
44、2, 3 2.4 VCC-0.5 V VOH4For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs VIN= VCCor GND IOH= -24 mA All 4.5 V 1, 2, 3 2.0 VCC-0.5Low level output voltage 3007 VOL14/ For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V F
45、or all other inputs VIN= VCCor GND IOL= 300 A All 4.5 V 1, 2, 3 0.20 V VOL2For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs VIN= VCCor GND IOL= 48 mA 4.5 V 1, 2, 3 0.55 Three-state output current high 3021 IOZH5/ 6/ mOE = VIHor VILVIH= 2.0 V, VIL=
46、 0.8 V For all other inputs, VIN= VCCor GND VOUT= VCCAll 5.5 V 1, 2 1.0 A 3 5.0 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92257 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-
47、3990 REVISION LEVEL C SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test and MIL-STD-883 test method 1/ Symbol Test conditions 2/ -55C TC +125C +4.5 V VCC +5.5 V unless otherwise specified Device type VCCGroup A subgroups Limits 3/ Unit Min Max Three-state
48、output current low 3021 IOZL5/ 6/ mOE = VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs, VIN= VCCor GND VOUT= GND All 5.5 V 1, 2 1.0 A 3 5.0 Negative input clamp voltage 3022 VIC-For input under test, IIN= -18 mA All 4.5 V 1, 2, 3 -1.2 V Input current high 3010 IIHFor input under test VIN= VCCFor all other inputs VIN= VCCor GND All 5.5 V 1, 2 1.0 A 3 5.0 Input current low 3009 IILFor input under test VIN= GND For all other inputs VIN= VCCor GND All 5.5 V 1, 2 1.0 A 3 5.0 Input capacitance 3012 CIN7/ See 4.4.1c TC= +25 All GND 4 6.0 pF Output capacitance 3012 COUT7/
