1、SY2-5962-92270 REV D 9999996 i!lLBb59 969 NOTICE OF REVISION (NOR) THIS REVISION DESCRIBED BELOW HAS BEEN AUTHORIZED FOR THE DOCUMENT LISTED. 1. DATE (YYMMDD) Form Approved OMB NO. 0704-0188 97-1 0-30 Public reporting burden for this collection is estimated to average 2 hours per response including
2、the time for reviewing instructions searching existin data sources, garnering and maintainin the data needed, and completing qnd reyiewing pe pdlection of information. Sen% comments regardin this burden estirrde or an other as ect of this collection of information includin su gestions for reducing t
3、his burden to 6% artment of Defense, WasKington dad uarters Sewices Directorate for Infomaion 8perations and Reports, 1215 Jefferson bais Hi hwa , Suite 1204, Ariin ton, VI 22202-4302, arid to the Office of Mana ement and Bud et Pa erwork Reduction Pro ect 0%4- add “D“. Revisions description column;
4、 add “Changes in accordance with NOR 5962-R002-98. Revisions date column; add “97-1 0-30“. Revision level block; change to “D“. Rev status of sheets; for sheet 1 and 7, change to “D“. Sheet 7: Table I; Low level ground bounce noise, Vop, change the maximum limit from 1 100“ to “1300“ Table I; Low le
5、vel ground bounce noise, VOLV, change the maximum limit from “-1000“ to “-1250 Table I; High level Vcc bounce noise, VOHV, change the maximum limit from -600“ to “-750 Revision level block; change to “D“. I 14. THIS SECTION FOR GOVERNMENT USE ONLY d. TITLE Chief, Custom Microelectronics Team e. SIGN
6、ATURE MONICA L. POELKING f. DATE SIGNED (Y YMMDD) 97-10-30 15a. ACTIVITY ACCOMPLISHING REVISION DSCC-VAC b. REVISION COMPLETED (Signature) CHARLES F. SAFFLE, JR. c. DATE SIGNED (YYMMDD) 97-1 0-30 DD Form 1695, APR 92 Previous editions are obsolete. Provided by IHSNot for ResaleNo reproduction or net
7、working permitted without license from IHS-,-,- SMD-5762-92270 REV C 9999996 0090912 799 m DEFENSE LOGISTICS AGENCY DEFENSE SUPPLY CENTER, COLUMBUS POST OFFICE BOX 3990 COLUMBUS, OH 43216-5000 IN REPLY REFER TO DSCC-VAC (Mr. T. Nguyen/(DSN)850-067 1/6 14-692-067 ltvn) SUBJECT: Notice of Revision (NO
8、R) 5962-R046-97 for Standard Microcircuit Drawing (SMD) 5962-92270 MilitaryAndustry Distribution The enclosed NOR is approved for use effective as of the date of the NOR. In accordance with MIL-STD- 1 O0 SMD holders should, as a minimum, handwrite those changes described in the NOR to sheet 1 of the
9、 subject SMD. After completion, the NOR should be attached to the subject SMD for future reference. Those companies who were listed as approved sources of supply prior to this action have agreed to actions taken on devices for which they had previously provided DSCC a certificate of compliance. This
10、 is evidenced by an existing active current certificate of compliance on file at DSCC with a DSCC record of verbal coordination. The certificate of compliance for these devices is considered concurrence with the new revision unless DSCC is otherwise notified. If you have comments or questions, pleas
11、e contact Thanh Nguyen at (DSN)850-067 1/(614)692-O67 1. 1 Encl / MONICA L. POELKING Microelectronics Tsam Chief, Custom Federal Recycling Program Printed on Recycled Paper Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SMD-5962-72270 REV C 9339996
12、0090933 625 b. ADDRESS (Street, City, State, Zip Code) 5. CAGE CODE . ORIGINATOR Defense SUPPY Center, Columbus 67268 _ _ 1. DATE (WMMDD) 96-1 1-08 NOTICE OF REVISION (NOR) HIS REVISION DESCRIBED BELOW HAS BEEN AUTHORIZED FOR THE DOCUMENT LISTED. 6. NOR NO. 5962-RO46-97 iblic repocting bud- for this
13、 dlecon is estimated to average 2 hain per respcn?. induding the 6me br reviewing insbudions searching existing data SOUITOS miein and mainntn the da needed. md canplebng and mewing me milecbon oi intormation. send ammenb regardin this burden esfimate of any ornei indudirt add “Changes in accordance
14、 with NOR 5962-R046-97“. Revisions date column; add “96-1 1-06. Revision level block; change from “6 to “C“. Rev status of sheets; for sheets 1 and 6, change from “B“ to “C. Table I, output short circuit current, 10s; change maximum limit from “-225 mA“ to “-250 mA“. Table I, output drive current, l
15、o; delete this test completely. Revision level block; change from “B“ to “C“. 14. THIS SECTION FOR GOVERNMENT USE ONLY DSCC-VAC 9. TITLE Chief, Custom Microelectronics Team I 5a. ACTIVITY ACCOMPLISHING REVISION DSCC-VAC D Form 1695, APR 92 Previous editions are obsolete. Provided by IHSNot for Resal
16、eNo reproduction or networking permitted without license from IHS-,-,-DEFENSE LOGISTICS AGENCY DEFENSE ELECTRONICS SUPPLY CENTER DAYTON. OH 45444-5 765 IN REPLY REFER lo DESC-ELDC (Mr. Nguyen/(AV 986) 5 13-296-6023/tn) SUBJECT: Notice of Revision (NOR) 5962-R91-95 for Standardized Military Drawing (
17、SMD) 5962-92270 Military/Industry Distribution The enclosed NOR is approved for use effective as of the date of the NOR. In accordance with MIL-STD-100 SMD holders should, as a minimum, handwrite those changes described in the NOR to sheet 1 of the subject SMD. After completion, the NOR should be at
18、tached to the subject SMD for future reference. Those companies who were listed as approved sources of supply prior to this action have agreed to actions taken on devices for which they had previously provided DESC a certificate of compliance. This is evidenced by an existing active current certific
19、ate of compliance on file at DESC along with a DESC record of verbal coordination. The certificate of compliance for these devices is considered concurrence with the new revision unless DESC is otherwise notified. If you have comments or questions, please contact Thanh Nguyen at (AV)986-6023 or (513
20、)296-6023. 1 Encl Chief, Custom Microelectronics Branch Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-D 9999996 00bbbb 853 = 1. DATE NOTICE OF REVISION (NOR) I (WNMDD) 9. TITLE OF DOCUMENT MICROCIRCUIT, DIGITAL, FAST CMOS, 16-BIT INVERTING BUFFER/
21、LINE DRIVER WITH SERIES RESISTOR AND THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON 95-03-17 This revision described below has been authorized for the document listed. IO. REVISION LETTER a. CURRENT b. NEW A B ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS
22、FORM. 4. ORIGINATOR b. ADDRESS (Street, City, State, Zip Code) 5. CAGE CODE a. (X one) 7. CAGE CODE Defense Electronics Supply Center 1507 Uilmington Pike Dayton, OH 45444-5765 a. TYPED NAME (First, Middle Initial, Last 1 X (1) Existing document supplemented by the NOR may be used in manufacture. (2
23、) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENT Form Approved MB NO. 0704-0188 c. TYPED NAME (First, Middle Initial, L
24、ast) 2. PROCURING ACTIVITY NO. d. TITLE Chief, Custom Microelectronics 15a. ACTIVITY ACCOMPLISHING REVISION DESC-ELDC 3. DODAAC e. SIGNATURE Monica L. Poelking b. REVISION COMPLETED (Signature) Thanh V. Nguyen 6. NOR NO. 5962-R091-95 8. DOCUMENT NO. 5962-92270 11. ECP NO. N/A All 13. DESCRIPTION OF
25、REVISION Sheet 1: Revisions ltr column; add “B“. Revisions description column; add “Changes in accordance with NOR 5962-R091-95“. Revisions date column; add “95-03-17“. Revision level block; change from “A“ to “BI. Rev status of sheets; for sheet 1, change from “A“ to “8“. Table 1, output current lo
26、w, IODL; change maximum limit from “IS0 mA“ to “200 mA“. Table I, output current high, IODH; change maximum Limit from “-150 mA“ to “-200 mA“. Revision level block; add 93“. For sheet 6, add “B“. Sheet 6: I 14. THIS SECTION FOR GOVERNMENT USE ONLY I I .king f. DATE SIGNED (YYMMDD) 95-03-1 7 c. DATE
27、SIGNED (YYMMDD) 95-03-17 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE LOGISTICS AGENCY DEFENSE ELECTRONICS SUPPLY CENTEF DAYTON. OH 45444-5765 I IN REPLY REFER To DESC-ELDC (Mr. Nguyen/(AV 986) 5 13-2966023/wn) SUBJECT: Notice of Revision
28、(NOR) 5962-R285-94 for Standardized Military Drawing (SMD) 5962-92270 Military/Industry Distribution The enclosed NOR is approved for use effective as of the date of the NOR. In accordance with MIL-STD-100 SMD holders should, as a minimum, handwrite those changes described in the NOR to sheet 1 of t
29、he subject SMD. After completion, the NOR should be attached to the subject SMD for future reference. Those companies who were listed as approved sources of supply prior to this action have agreed to actions taken on devices for which they had previously provided DESC a certificate of compliance. Th
30、is is evidenced by an existing active current certificate of compliance on file at DESC along with a DESC record of verbal coordination. The certificate of compliance for these devices is considered concurrence with the new revision unless DESC is otherwise notified. If you have comments or question
31、s, please contact Thanh Nguyen at (AV)9866023 or (513)296-6023. 1 Encl AIONICA L. POELKING J Chief, Custom Microelectronics Branch Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-a b 00b7bb8 626 a 1 NOTICE OF REVISION (NOR) This revision described be
32、low has been authorized for the document listed. Form Approved OMB NO. 0704-0188 1. DATE (WMMDD) 94-10-13 Public reporting.burden.for this collection is estimated to average 2 hours per response, including the time for reviewin searching existing data.sources, gathering and maintaining the data need
33、ed, and compyeting and reviewing the collection of information. this burden estimate or any other aspect of this collection of information for reducin .this burden, to De artment of Defense Washingtion Headquartets Services for Informa8ion Operations and add “A“. Revisions description column; add “C
34、hanges in accordance with NOR 5962-R285-94“. Revisions date column; add “94-10-13. Revision level block; add “A“. Rev status of sheets; for sheets 1, 7, and 9, add “A“. Table I, low level ground bounce noise, VoLp, maximum limits column; add “1100“. Table I, low level ground bounce noise, VoLv, maxi
35、mum limits column; add “-1ooO“ Table I, high level Vcc bounce noise, VOHp, maximum limits column; add “750“. Table I, high level Vcc bounce noise, VOHV, maximum limits column; add “-600“. Revision level block; add “A“. Sheet 7: d. TITLE e. SIGNATURE Chief, Custom Microelectronics Monica L. Poelking
36、15a. ACTIVITY ACCOMPLISHING REVISION b. REVISION COMPLETED (Signature) DESC-ELDC Thanh V. Nguyen Sheet 9: Table I, footnote Q/; delete last paragraph. Revision level block; add “A“. f. DATE SIGNED (YYMMDD) 94-1 0-1 3 c. DATE SIGNED (YYMMDD) 94-10-13 D Form 1695, APR 92 Previous editions are obsolete
37、 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-LTR DESCRIPTION I OP SHEETS APPROVED DATE (YR-MO-DA) PMIC NIA REV SHEET REV SHEET STANDARD MICROCIRCUIT DRAWING 15 16 17 THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTM
38、ENT OF DEFENSE AMSC NIA )ESC FORM 193 JUL 91 DISTRIBUTION STATEMENT A. PREPARED BY Thanh V. Nguyen CHECKED BY Thanh V. Nguyen APPROVED BY Monica L. Poelking DRAWING APPROVAL DATE 94-09-07 REVISION LEVEL DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO 45444 MICROCIRCUIT, DIGITAL, FAST CMOS, WITH SERIE
39、S RESISTOR AND INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON 16-BIT INVERTING BUFFER/LINE DRIVER THREE-STATE OUTPUTS, TTL COMPATIBLE 5962-92270 SIZE I CAGE CODE n 67268 SHEET 1 OF ia 5962-E398-94 Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo re
40、production or networking permitted without license from IHS-,-,-b 00b7b70 28Y Device class Device requirements documentation fi Vendor self-certification to the requirements for non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883 Q or V Certification and qualification to NIL-1-3853
41、5 1.2.4 Case outline(s). The case outLineCs) shall be as designated in MIL-STD-1835, and as follows: Outline letter Descriptive designator Termi na 1s Packaae style X GDFPI -F48 48 Flat pack 1.2.5 Lead finish. The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein) for class M or MIL-1
42、-38535 for classes Q and V. designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference. Finish letter “X“ shall not be marked on the microcircuit or its packaging. The “X“ STANDARD 5962-92270 MICROCIRCUIT DRAWING DEFENSE E
43、LECTRONICS SUPPLY CENTER DAYTON, OHIO 45444 . DESC FORM 193A JUL 91 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-m 999999b OObb3 330 m 1.3 1.4 5 Absolute maximum ratings. I/ 2/ 3/ Supply voltage range (V - - - - - - - - - - - - - - - - - - DC inpu
44、t voCtage range FV N) - - - - - - - - - - - - - - - - - DC output voltage range do T) - - - - - - - - - - - - - - - - DC input clamp current dWT -0.5 V and +7.0 V) - - - - DC output source current (I - - - - - - - - - DC output sink current (IoL?H(per output) - - - - - - - - - - Grouni current (IGND
45、) - - - - - - - - - - - - - - - - - - - - Storage temperature range (T TG) - - - - - - - - - - - - - - - Case temperature under bias ITBIAs) - - - - - - - - - - - - - Lead temperature (soldering, 1 seconds) - - - - - - - - - - - Thermal resistance, junction-to-case (OJc) - - - - - - - - - - Junction
46、 temperature (TJ) - - - - - - - - - - - - - - - - - - Haximum power dissipation (PD) - - - - - - - - - - - - - - - - Recommended operating conditions. 21 I/ Supply voltage range (V, 1 - - - - - - - - - - - - - - - - - - Input voltage range (V NS - - - - - - - - - - - - - - - - - - Output voltage ran
47、ge (Jour) - - - - - - - - - - - - - - - - - = -0.5 v (per output) DC Vc current (Icc) - - - - - - - - - - - - - - - - - - Maximum low level input voltage Hinimum high level input voltage Case operating temperature range Maximum input rise or fall rate - - - - - - - - - - - - (from VIN = 0.3 V to 2.7
48、 V, 2.7 V to 0.3 V) - - - - - - - - Haximum high level output current (Io ) - - - - - - - - - - - Haximum low level output current (ioL! - - - - - - - - - - - - Digital lwic testing for device classes Q and V. Fault coverage measurement of manufacturing Logic tests (MIL-STD-883, test method 5012) -
49、- - - - - - - APPLICABLE DOCUMENTS -0.5 V dc to +7.0 V dc -0.5 V dc to Vcc + 0.5 V dc -0.5 V dc to Vcc 4/ -20 mA I20 mA -30 mA +70 mA *480 mA +I120 ld -65OC to +150aC -65OC to +13SoC +3oooc See MIL-STO-1835 +17S0C 1.0 u +4.5 V dc to +5.5 V dc +O.O V dc to Vcc +O.O V dc to Vcc 0.8 V 2.0 v -55C to +125OC 2.5 nsfV 16 mA -16 mA XX percent s/ 2.1 Government
