1、SMD-5962-92278 REV C 9999996 O090900 T77 f DEFENSE LOGISTICS AGENCY DEFENSE SUPPLY CENTER, COLUMBUS POST OFFICE BOX 3990 1 COLUMBUS, OH 43216-5000 IN REPLY REFER TO DSCC-VAC (Mr. T. Nguyen/(DSN)850-0671/6 14-692-067 l/tvn) DEC O6 1998 SUBJECT: Notice of Revision (NOR) 5962-RO52-97 for Standard Micro
2、circuit Drawing (SMD) 5962-92278 Militaryhndustry Distribution The enclosed NOR is approved for use effective as of the date of the NOR. In accordance with MIL-STD- 1 O0 SMD holders should, as a minimum, handwrite those changes described in the NOR to sheet 1 of the subject SMD. After completion, th
3、e NOR should be attached to the subject SMD for future reference. Those companies who were listed as approved sources of supply prior to this action have agreed to actions taken on devices for which they had previously provided DSCC a certificate of compliance. This is evidenced by an existing activ
4、e current certificate of compliance on file at DSCC with a DSCC record of verbal coordination. The certificate of compliance for these devices is considered concurrence with the new revision unless DSCC is otherwise notified. If you have comments or questions, please contact Thanh Nguyen at (DSN)850
5、-0671/(614)692-067 1. 1 Encl /MONICA L. POELKING Chief, Custom Microelectronics Team Federal Recycling Program Printed on Recycled Paper Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MD-5qb2-92278 REV c 9799996 00909OL 903 (YYMMDD) 1. DATE Form App
6、roved OMB NO. 0704-0188 96-1 1-08 NOTICE OF REVISION (NOR) THIS REVISION DESCRIBED BELOW HAS BEEN AUTHORIZED FOR THE DOCUMENT LISTED. ubli reporling burden for this wiiection is estimaied to average 2 hou? per response, induding time for re-g instnidions, searching existing data soums, aiherin and m
7、aintainin !he data needed and mmpleng and reviewnig the diedim of i Send annients qardin this burden esmate or any other speddthis wilecon o!infwmation indudi wg estions for reducing this burden to D$%of Defense Washingon fieadquarters Cecviuis Diradotate !r Information Operations and Re brls. 12% J
8、e#erson Davis Hi hway. Suite 1201, Arlington. VA 222024362. and io the Omce of Management nd Budget. a erwork Reduction Pro add “C“. Revisions description column; add “Changes in accordance with NOR 5962-R052-97“. Revisions date column; add “96-1 1-08. Revision level block; change from “B to “C“. Re
9、v status of sheets; for sheet 1, change from “B to “C“. For sheet 7, add “C“. Table I. output short circuit current, los; change maximum limit from “-225 mA“ to “-250 W. Table I, output drive current, IO; delete this test completely. Revision level block; add “C“. X (1) Existing document supplemente
10、d by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENT DSCC-VAC c. TYPED NAME (Firs
11、t, Middle Initial, Last) Monica L. Poelking d. TITLE Chief, Custom Microelectronics Team 15a. ACTIVITY ACCOMPLISHING REVISION DSCC-VAC e. SIGNATURE f. DATE SIGNED (YYMMDD) 96-1 1-08 Monica L. Poelking b. REVISION COMPLETED (Signature) c. DATE SIGNED (YYMMD D) Thanh V. Nguyen 96-1 1-08 Provided by IH
12、SNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-W 999b 0068156 297 W DEFENSE LOGISTICS AGENCY DEFENSE ELECTRONICS SUPPLY CENTER DAMON. OH 45444-5765 IN REPLY DESC-ELDC (Mr. Nguyen/(AV 986) 5 13-2966023/tn) REFER TO SUBJECT: Notice of Revision (NOR) 5962-RW5-95 for
13、 Standardized Military Drawing (SMD) 5962-92278 Military/Industry Distribution The enclosed NOR is approved for use effective as of the date of the NOR. In accordance with MIL-STD-100 SMD holders should, as a minimum, handwrite those changes described in the NOR to sheet 1 of the subject SMD. After
14、completion, the NOR should be attached to the subject SMD for future reference. Those companies who were listed as approved sources of supply prior to this action have agreed to actions taken on devices for which they had previously provided DESC a certificate of compliance. This is evidenced by an
15、existing active current certificate of compliance on file at DESC along with a DESC record of verbal coordination. The certificate of compliance for these devices is considered concurrence with the new revision unless DESC is otherwise notified. If you have comments or questions, please contact Than
16、h Nguyen at (AV)986-6023 or (513)296-6023. 1 Encl MONICA L. POELKING Chief, Custom Microelectronics Branch Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1. DATE (YYMMDD) 95-04-04 NTiCE OF REVISION (NOR) This revisim dcccribed below has been authori
17、zed for the document listed. b. ADDRESS (Street, City, State, Zip Code) 5. CAGE CODE 4. ORIGINATOR Defense Electronics Supply Center 67268 7. CAGE CODE a. TYPED NAME (First, Middle Initial, Last) Dayton, OH 45444-5765 1507 Wilmington Pike 67268 Public reporting.burden for this collection is estimate
18、d to average 2 hours per response the time for reviewin data needed, and compyeting and reviewing the collection.of information, Send comments regarding this burden estimate or any other aspect of this collection of i Formation, including suggestions for reducin this burden to De artment of Defense
19、Washingtion tieadquarters Services Directorate for InformaFion OperatioAs and ie Orts 1215 Jefferson Davis Highway, Sulte 1204, Arl;n ton VA 2220-4302, and to the Office of kana add “E“. Revisions description column; add “Changes in accordance with NOR 5962-R095-95“. Revisions date column; add “95-0
20、4-04“. Revision level block; change from “A“ to “E“. Rev status of sheets; for sheet 1, change from “A“ to “E“. Table I, output current low, IoDL; change maximum Limit from “150 mA“ to “200 mA“. Table I, output current high, IODH; change maximum Limit from “-150 mA“ to “-200 mA“ Revision level block
21、; add “E“. For sheet 6, add “E“. Sheet 6: c. TYPED NAME (First, Middle Initial, Last) 14. THIS SECTION FOR GOVERNMENT USE ONLY I I DESC-ELDC (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change
22、. a. (X one) Monica L. Poelking d. TITLE Chief, Custom Microelectronics 15a. ACTIVITY ACCOIIPLISHING REVISION DESC-ELDC e. SIGNATURE f. DATE SIGNED (YYMMDD) Monica L. Poelking 95-04-04 b. REVISION COMPLETED (Signature) c. DATE SIGNED (YYMMDD) Thanh V. Nguyen 95-04-04 Provided by IHSNot for ResaleNo
23、reproduction or networking permitted without license from IHS-,-,-DEFENSE LOGISflCS AGENCY DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OH 45.444- 5765 , DESC-ELDC (Mr. Nguyen/(AV 986) 513-296-6023/tvn) REFER TO SUBJECT: Notice of Revision (NOR) 5962-ROO3-95 for Standardized Military Drawing (SMD) 5962
24、-92278 Military/Industry Distribution The enclosed NOR is approved for use effective as of the date of the NOR. In accordance with MIL-STD-100 SMD holders should, as a minimum, handwrite those changes described in the NOR to sheet 1 of the subject SMD. After completion, the NOR should be attached to
25、 the subject SMD for future reference. Those companies who were listed as approved sources of supply prior to this action have agreed to actions taken on devices for which they had previously provided DESC a certificate of compliance. This is evidenced by an existing active current certificate of co
26、mpliance on file at DESC along with a DESC record of verbal coordination. The certificate of compliance for these devices is considered concurrence with the new revision unless DESC is otherwise notified. If you have comments or questions, please contact Thanh Nguyen at (AV)986-6023 or (513)296-6023
27、. 1 Encl NONICA L. POELKING Chief, Custom Microelectronics Branch Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1. DATE (YYRRDD) NOTICE OF REVISION (NOR) I 94-1 0-1 3 This revision described below has been authorized for the document listed. I Form
28、 Approved ORB NO. 0704-0188 2. PROCURING ACTIVITY No. I b. ADDRESS (Street, City, State, Zip Code) 5. CAGE CODE 4. ORIGINATOR a. TYPED NAME (First, Middle Initial, Defense Electronics Supply Center 67268 1507 Wilmington Pike Dayton, OH 45444-5765 7. CAGE CODE 67268 Last) 3. DDAAC 6. NOR NO. 5962-R00
29、3-95 8. DOCUMENT NO. 5962-92278 I I IO. REVISION LETTER 9. TITLE OF DOCUMENT MICROCIRCUIT, DIGITAL, FAST CMOS, 16-BIT TRANSCEIVER/REGISTER WITH SERIES RESISTOR AND THREE-STATE OUTPUTS, TTL COMPATIBLE a. CURRENT INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON Ini tia1 b. NEW A 12. CONFIGU
30、RATION ITEM (OR SYSTEM) TO WHICH ECP APPLIES All 13. DESCRIPTION OF REVISION Sheet 1: Revisions ltr column; add “A“. Revisions description column; add “Changes in accordance with NOR 5962-RU3-95“. Revisions date column; add “94-10-13“. Revision level block; add “A“. Rev status of sheets; for sheets
31、1, 8, and IO, add “A“. Table I, low level ground bounce noise, VoLp, maximum limits column; add “1450“. Table I, low level ground bounce noise, VoLv, maximum limits column; add “-1350“. Table I, high level Vcc bounce noise, Vmp, maximum limits column; add “850“. Table I, high level Vcc bounce noise,
32、 VoHv, maximum limits column; add “-650“. Revision level block; add lA“. Sheet 8: Sheet IO: Table I, footnote g/; delete last paragraph. Revision level block; add “A“. 11. ECP NO. N/A a. (X one) b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENT I X (1) Existing document supplemented by the NOR
33、 may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. c. TYPED NAME (First, Middle Initial, Last) I d. TITLE Chief, Custom Microelectronics 15a. ACTI
34、VITY ACCOMPLISHING REVISION DESC-ELDC e. SIGNATURE f. DATE SIGNED (WMRDD) 94-1 0-1 3 Monica L. Poelking b. REVISION COMPLETED (Signature) c. DATE SIGNED (WRMDD) Thanh V. Nguyen 94-10-13 DD Fon 1695, APR 92 Previous editions are obsolete Provided by IHSNot for ResaleNo reproduction or networking perm
35、itted without license from IHS-,-,-L I OF SHEETS - D 9999976 OOb81bO 718 REVIS IONS DATE (YR-MO-DA) APPROVED LTR DESCRIPTION REV SHEET REV I PMIC NIA 15 SHEET STANDARD MICROCIRCUIT DRAWING 16 17 THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE AMCC N/A D
36、ESC FORM 193 JUL 91 DISTRIBUTION STATEMENT A. REV III SHEET PREPARED BY Thanh V. Nguyen CHECKED BY Thanh V. Nguyen APPROVED BY Monica L. Poelking DRAWING APPROVAL DATE 94-09-07 REVISION LEVEL DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO 45444 MICROCIRCUIT, DIGITAL, FAST CMOS, 16-BIT TFtANSCEIVER/R
37、EGISTER WITH SERIES RESISTOR AND THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON I I SIZE I CAr7“E I 5962-92278 n SHEET 1 OF 21 5962-E399-94 Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or network
38、ing permitted without license from IHS-,-,- D 9999996 OOb8LbL 654 SIZE STANDARD A MICROCIRCUIT DRAWING DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO 45444 REVISION LEVEL 1. SCOPE 1.1 Scope. This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product
39、assurance classes consisting of military high reliability (device classes GI and M) and space application (device class VI, and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). 1.2.1 of MIL-STD-883, “Provisions for the use of MIL-ST
40、D-883 in conjunction with compliant non-JAN devices“. available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. Device class M microcircuits represent non-JAW class E microcircuits in accordance with When 1.2 m. The PIN shall be as shown in the following example: T I
41、 T I T 92278 I L ,?- I I I Lead Case Devi ce Devi ce f RHA Federal stock class designator type class outline finish designator (sec 1.2.1) (see 1.2.2) designator (see 1.2.4) (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA desiqnator. Device class M RHA marked devices shall meet the NIL-1-38535
42、appendix A specified RHA levels snd shall be marked with the appropriate RHA designator. MIL-1-38535 specified RHA levels and shall be marked with the appropriate RHA designator. non-RHA device. Device classes GI and V RHA marked devices shall meet the A dash (-1 indicates a 1.2.2 Device typeW. The
43、device typecd shall identify the circuit function as follows: Device type Generic number Circuit function 5962-92278 SHEET 2 o1 54F CT162646T 16-bit transceiver/register with series resistor and three-state outputs, TTL compatible inputs and limited output voltage swing 16-bit transceiver/register w
44、ith series resistor and three-state outputs, TTL compatible inputs and limited output voltage swing 02 54F CTI 62646AT 03 54FCT162646CT 16-bit transceiver/register with series resistor and three-state outputs, TTL compatible inputs and limited output voltage swing 1.2.3 Device class desiqnator. The
45、device class designator shall be a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for non-JAN class 6 microcircuits in accordance with 1.2.1 of MIL-STD-883 Q or V Certification and quali
46、fication to MIL-1-38535 1.2.4 Case outline(s). The case outline(s) shall be as designated in MIL-STD-1835, and as follows: Packaqe style Outline letter Descriptive desiqnator Termi na 1s X GDFPI-F56 56 Flat pack 1-2.5 Lead finish. The lead finish shall be as specified in MIL-STD-883 (see 3.1 herein)
47、 for class M or MIL-1-38535 for classes GI and V. designation is for use in specifications when Lead finishes A, E, and C are considered acceptable and interchangeable without preference. Finish letter “X“ shall not be marked on the microcircuit or its packaging. The “X“ . DESC FORM 193A JUL 91 Prov
48、ided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.3 1.4 1.5 SIZE STANDARD A MICROCIRCUIT DRAWING DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO 45444 REVISION LEVEL Absolute maitimum ratings. i/ g/ 31 Supply voltage range (V - - - - - - - - - - - - - - -
49、 - - - DC input voltage range FvI,) - - - - - - - - - - - - - - - - - DC output voltage range Wo - - - - - - - - - - - - - - - - DC input clamp current (IJ (VIN = -0.5 v ) - - - - - - - - - DC output clamp current (IOK) WOUT -0.5 V and +7.0 V) - - - - DC output source current (I - - - - - - - - - OC output sink current IOLyper output) - - - - - - - - - - Crouns current (lGND) - - - - - -
