1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Drawing updated as part of 5 year review. -rrp 08-05-13 R. HEBER THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED. REV SHET REV SHET REV STATUS REV A A A A A A A A A A A OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 PMIC N/A PREPARED BY RICK
2、C. OFFICER DEFENSE SUPPLY CENTER COLUMBUS STANDARD MICROCIRCUIT DRAWING CHECKED BY CHARLES E. BESORE COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY MICHAEL A. FRYE MICROCIRCUIT, LINEAR, FOUR CHANNEL, SELECTABLE, VIDEO OPERATIONAL AMP
3、LIFIER, MONOLITHIC SILICON AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 93-04-22 AMSC N/A REVISION LEVEL A SIZE A CAGE CODE 67268 5962-93095 SHEET 1 OF 11 DSCC FORM 2233 APR 97 5962-E162-07 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from I
4、HS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93095 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and spa
5、ce application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example:
6、 5962 - 93095 01 M E X Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specif
7、ied RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify th
8、e circuit function as follows: Device type Generic number Circuit function 01 HA2444 Four channel, selectable video operational amplifier 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements
9、 documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1
10、835 and as follows: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16 16 Dual-in-line 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo r
11、eproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93095 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Voltage between V+ and V- terminals 35 V dc Differ
12、ential input voltage . 6 V dc Voltage at either input terminal . V+ to V- Peak output current ( 10% duty cycle) . 40 mA Power dissipation (PD) . 1.4 W 2/ Junction temperature (TJ) . +175C Storage temperature range . -65C to +150C Lead temperature (soldering 10 seconds) +275C Thermal resistance, junc
13、tion-to-case (JC). See MIL-STD-1835 Thermal resistance, junction-to-ambient (JA) . 71C/W 1.4 Recommended operating conditions. 2/ Operating supply voltage range (V) 12 V dc to 15 V dc Load resistance (RL) . 1 k Source resistance (RS) . 50 Operating ambient temperature range (TA) . -55C to +125C 2. A
14、PPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEP
15、ARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-
16、HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch/ or http:/assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, P
17、hiladelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has
18、been obtained. _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Derating above +75C at 14 mW/C. Provided by IHSNot for ResaleNo reproduction or networking permitted wi
19、thout license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93095 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 4 DSCC FORM 2234 APR 97 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance
20、 with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PR
21、F-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for
22、 device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Truth table(s). The truth table(s) shall be as specified on figure 2. 3.3 Electrical performance characteris
23、tics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The electrica
24、l test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SM
25、D PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for devi
26、ce class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix
27、A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufac
28、turer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requ
29、irements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provi
30、ded with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verifica
31、tion and review for device class M. For device class M, DSCC, DSCCs agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit
32、group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 49 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93
33、095 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits 2/ Unit Min Max Input offset voltage VO
34、SVCM= 0 V 1 01 -7 +7 mV 2, 3 -20 +20 Channel to channel offset voltage mismatch V VCM= 0 V 1 01 5 mV 2, 3 12 Input bias current +IBVCM= 0 V, +RS= 250 , -RS= 50 1 01 -15 +15 A 2, 3 -25 +25 +IBVCM= 0 V, +RS= 50 , -RS= 250 1 -15 +15 2, 3 -25 +25 Input offset current IOSVCM= 0 V, +RS= 250 , -RS= 250 1 0
35、1 -4 +4 A 2, 3 -8 +8Large signal voltage gain +AVOLVOUT= 0 V and +5 V 4 01 71 dB 5, 6 65 -AVOLVOUT= 0 V and -5 V 4 71 5, 6 65 Common mode rejection ratio +CMRR VCM= +5 V, VOUT= -5 V, V+ = 10 V, V- = -20 V 1, 2, 3 01 68 dB -CMRR VCM= -5 V, VOUT= +5 V, V+ = 20 V, V- = -10 V 68 Output voltage swing +VO
36、UT1, 2, 3 01 10 V -VOUT-10 Output current +IOUTVOUT= -10 V, RL= open 1, 2, 3 01 25 mA -IOUTVOUT= +10 V, RL= open -25 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93095 DEFENS
37、E SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits 2/ Unit Min Max Output current (devic
38、e disabled) +DISAB VOUT= +5 V, VEN= 0.8 V, RL= open 1, 2, 3 01 860 A -DISAB VOUT= -5 V, VEN= 0.8 V, RL= open 860 Quiescent power supply current +ICCVOUT= 0 V, IOUT= 0 mA 1, 2, 3 01 25 mA -ICCVOUT= 0 V, IOUT= 0 mA -25 Supply current (device disabled) +ICCDISVOUT= 0 V, VEN= 0.8 mA 1, 2, 3 01 10 mA -IC
39、CDISVOUT= 0 V, VEN= 0.8 mA -10 Power supply rejection ratio +PSRR VSUP= +5 V, V+ = 15 V, V- = -15 V V+ = 20 V, V- = -15 V 1, 2, 3 01 65 dB -PSRR VSUP= +5 V, V+ = 15 V, V- = -15 V V+ = 15 V, V- = -20 V 65 Digital input voltages (D0, D1, EN) VIL1, 2, 3 01 0.8 V VIH2.4 Input current (D0, D1) DXIILVIL=
40、0 V 1, 2, 3 01 1 mA DXIIHVIH= 5 V 1.2 A Input current (EN) ENIILVIL= 0 V 1, 2, 3 01 50 A ENIIHVIH= 5 V 1.2 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93095 DEFENSE SUPPLY C
41、ENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits 2/ Unit Min Max Slew rate +SR VOUT= -5 V to +5
42、V, AVCL= +1 V/V, measured at -3.5 V to +3.5 V 4, 5, 6 01 120 V/s -SR VOUT= +5 V to -5 V, AVCL= +1 V/V, measured at +3.5 V to -3.5 V 120 Functional test See 4.4.1b 7, 8 01 Channel select time tCSVEN= 2.4 V, 3/ AVCL= +1 V/V 9, 10 01 100 ns 11 125 Output enable time tOEAVCL= +1 V/V 4/ 9, 10, 11 01 100
43、ns Rise time tRVOUT= 0 V to +200 mV, 5/ AVCL= +1 V/V 9 01 11 ns 10, 11 12 Fall time tFVOUT= 0 V to -200 mV, 5/ AVCL= +1 V/V 9 01 11 ns 10, 11 12 Overshoot OS VOUT= 0 V to 200 mV, 5/ AVCL= +1 V/V 9 01 15 % 10, 11 30 1/ Unless otherwise specified, V = 15 V, RS= 50 , RL= 1 k, CL 10 pF, VIH= 2.4 V, and
44、VIL= 0.8 V. 2/ The algebraic convention, whereby the most negative value is a minimum and the most positive is maximum, is used in this table. Negative current shall be defined as conventional current flow out of a device terminal. 3/ Measured for all channel combinations. Channel select time is the
45、 delay in switching from channel X to channel Y. Channel Y input set to +5 V, all other channels set to 0 V. Select time is measured from 50% point of the critical digital select input to the 50% point on the output. 4/ Channel 1 selected with the input at 5 V. All other channels set to 0 V. Enable
46、input switched from 0.8 V to 2.4 V. Enable time is measured from the 50% point of the EN input to the 50% point on the output. 5/ If not tested, shall be guaranteed to the limits specified in table I herein. Parameters are controlled via design or process parameters and are not directly tested. Thes
47、e parameters are characterized upon initial design and after major process design changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93095 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISI
48、ON LEVEL A SHEET 8 DSCC FORM 2234 APR 97 Device type 01 Case outline E Terminal number Terminal symbol 1 GROUND (GND) 2 ENABLE (EN) 3 +INPUT 2 4 -INPUT 2 5 V- 6 +INPUT 1 7 -INPUT 1 8 OUTPUT 9 NC 10 -INPUT 3 11 +INPUT 3 12 V+ 13 -INPUT 4 14 +INPUT 4 15 D0 16 D1 NC = No connection FIGURE 1. Terminal connections. EN D1 D0 SELECTED CHANNEL H L L 1 H L H 2 H H L 3 H H H 4 L X X NONE-OUT is set to a high impedance state L = low state
