1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Add case outline X. Make changes to 1.2.4, 1.3, and editorial changes throughout. 96-05-23 M. A. FRYE B Make changes to dimensions D and L as specified under figure 1. Changes in accordance with NOR 5962-R367-97. 97-06-20 R. MONNIN C Make changes
2、 to dimensions L, R, and R1 as specified under figure 1. Redrawn. ro 97-12-01 R. MONNIN D Deleted figure 1. Added table IIB. Updated drawing to reflect current requirements. -rrp 03-03-10 R. MONNIN E Update boilerplate paragraphs to current MIL-PRF-38535 requirements. - ro 11-06-16 C. SAFFLE REV SHE
3、T REV SHET REV STATUS REV E E E E E E E E E E E OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 PMIC N/A PREPARED BY RICK C. OFFICER DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE D
4、EPARTMENT OF DEFENSE CHECKED BY SANDRA B. ROONEY APPROVED BY MICHAEL A. FRYE MICROCIRCUIT, LINEAR, LOW POWER DUAL/QUAD OPERATIONAL AMPLIFIER, MONOLITHIC SILICON DRAWING APPROVAL DATE 94-02-16 AMSC N/A REVISION LEVEL E SIZE A CAGE CODE 67268 5962-94534 SHEET 1 OF 11 DSCC FORM 2233 APR 97 5962-E343-11
5、 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94534 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product ass
6、urance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) leve
7、ls is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 94534 01 M P A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Leadfinish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA de
8、signator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-)
9、 indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 LMC6482 Low power dual operational amplifier 02 LMC6484 Low power quad operational amplifier 1.2.3 Device class designator. The device class
10、designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certific
11、ation and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style C GDIP1-T14 or CDIP2-T14 14 Dual in line P GDIP1-T8 or CDIP2-T8 8 Dual in line X GDFP1-G14 14 Flat pack
12、with gullwing leads 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5
13、962-94534 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Supply voltage (VCC) . 16 V Voltage at input/output pin . (+VCC) + 0.3 V, (-VCC) - 0.3 V Current at input pin 5 mA 2/ Current at output pin 30 mA 3/ Current at po
14、wer supply pin . 40 mA Differential input voltage VCCMaximum power dissipation (PD): Device type 01 . 160 mW Device type 02 . 315 mW Storage temperature range . -65C to +150C Lead temperature (soldering, 10 seconds) +260C Junction temperature (TJ) +150C 4/ Thermal resistance, junction-to-case (JC):
15、Case C 12C/W Case P . 16C/W Case X . 11C/W Thermal resistance, junction-to-ambient (JA): Cases C and P 86C/W Case X . 116C/W 1.4 Recommended operating conditions. Supply voltage (+VCC) . 3.0 V +VCC 15.5 V Ambient operating temperature range (TA) . -55C to +125C _ 1/ Stresses above the absolute maxim
16、um rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Limiting input pin current is only necessary for input voltages that exceed absolute maximum input voltage ratings. 3/ Applies to both single-supply and spi
17、lt-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of +150C. Output currents in excess of 30 mA over long term may adversely affect reliability. Do not short circuit output to +VCC, when +VCCis grea
18、ter than 13 V or reliability will be adversely affected. 4/ Junction temperature limits apply to packages soldered directly into a PC board. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94534 DLA LAND AND
19、MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 4 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specifi
20、ed, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Inter
21、face Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardizati
22、on Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applic
23、able laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management
24、(QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, a
25、nd physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Te
26、rminal connections. The terminal connections shall be as specified on figure 1. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in tabl
27、e I and shall apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table IIA. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN l
28、isted in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall
29、 still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required
30、 in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94534 DLA LAND AND MARITIME COLUMBUS, OHIO 43
31、218-3990 REVISION LEVEL E SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions 1/ -55C TA+125C Group A subgroups Device type Limits Unit unless otherwise specified Min Max Input offset voltage VOS1 All 0.75 mV 2,3 1.35Input bias current IIB1 All 25 pA
32、 2,3 100Input offset current IOS1 All 25 pA 2,3 100 Common mode rejection ratio CMRR 0 V VCM 15 V, 1 All 65 dB +VCC= 15 V 2,3 62 0 V VCM 5 V, 1 65 +VCC= 5 V 2,3 62 Positive power supply rejection ratio +PSRR 5 V +VCC 15 V, 1 All 65 dB VOUT= +2.5 V 2,3 62 -PSRR -5 V -VCC -15 V, 1 65 VOUT= -2.5 V, +VC
33、C= 0 V 2,3 62 Input common mode voltage range VCM5 V VCM 15 V, 1 All +VCC+0.25 -0.25 V for CMRR 50 dB 2,3 +VCC0 Output short circuit current ISCSourcing VOUT= 0 V, 1 All 16 mA +VCC= 5 V 2,3 12 Sinking VOUT= 5 V, 1 11 +VCC= 5 V 2,3 9 Sourcing VOUT= 0 V, 1 28 +VCC= 15 V 2,3 22 Sinking VOUT= 12 V, 2/ 1
34、 30 +VCC= 15 V 2,3 24 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94534 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 6 DSCC FORM 2234 APR 97 TABLE
35、I. Electrical performance characteristics - Continued. Test Symbol Conditions 1/ -55C TA+125C Group A subgroups Device type Limits Unit unless otherwise specified Min Max Supply current ICC +VCC= 5 V, both amps 1 01 1.4 mA 2,3 1.8+VCC= 15 V, both amps 1 1.6 2,3 2.0+VCC= 5 V, all four amps 1 02 2.8 2
36、,3 3.6+VCC= 15 V, all four amps 1 3 2,3 4 Output voltage swing VO+VCC= 5 V, 4 All 4.8 0.18 V RL= 2 k to +VCC/2 5,6 4.7 0.24 +VCC= 5 V, 4 4.5 0.50 RL= 600 to +VCC/2 5,6 4.24 0.65 +VCC= 15 V, 4 14.4 0.32 RL= 2 k to +VCC/2 5,6 14.2 0.45 +VCC= 15 V, 4 13.4 1.00 RL= 600 to +VCC/2 5,6 13.0 1.30 Large sign
37、al voltage gain AVSourcing, RL= 2 k, 3/ 4 All 140 V/mV +VCC= 15 V, 7.5 V VOUT 11.5 V 5,6 84 Sourcing, RL= 600 , 3/ 4 80 +VCC= 15 V, 7.5 V VOUT 11.5 V 5,6 48 Sinking, RL= 2 k, 3/ 4 35 +VCC= 15 V, 3.5 V VOUT 7.5 V 5,6 20 Sinking, RL= 600 , 3/ 4 18 +VCC= 15 V, 3.5 V VOUT 7.5 V 5,6 13 See footnotes at e
38、nd of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94534 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristic
39、s - Continued. Test Symbol Conditions 1/ -55C TA+125C Group A subgroups Device type Limits Unit unless otherwise specified Min Max Slew rate SR VCC= 15 V 4/ 4 All 0.9 V/s 5,6 0.6Gain bandwidth GBW VCC= 15 V, set up for 4 All 1.25 MHz non-inverting 5,6 1.151/ Unless otherwise specified, +VCC= 5 V, -V
40、CC= 0 V, RL 1 M, and VCM= VOUT= +VCC/2. 2/ Do not short circuit output to +VCCwhen +VCCis greater than 13 V or reliability will be adversely affected. 3/ VCM= 7.5 V and RLis connected to 7.5 V. 4/ Connected as voltage follower with 10 V step input, 2.5 V to 12.5 V for positive slew rate (+SR) and 12
41、.5 to 2.5 V for negative slew rate (-SR). Number specified is the slower of either the positive or negative slew rates. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements
42、 of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior to listing as
43、 an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of
44、 conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime
45、 -VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DLA Land and Maritime, DLA Land and Maritimes agent, and the acquiring activity retain the o
46、ption to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group
47、 number 49 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94534 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 8 DSCC FORM 2234 APR 97 Device types 01
48、 02 Case outlines P C and X Terminal number Terminal symbol 1 OUTPUT 1 OUTPUT 1 2 -INPUT 1 -INPUT 1 3 +INPUT 1 +INPUT 1 4 -VCC+VCC5 +INPUT 2 +INPUT 2 6 -INPUT 2 -INPUT 2 7 OUTPUT 2 OUTPUT 2 8 +VCCOUTPUT 3 9 - -INPUT 310 - +INPUT 3 11 - -VCC12 - +INPUT 4 13 - -INPUT 414 - OUTPUT 4 FIGURE 1. Terminal connections. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUI
