1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Update boilerplate paragraphs to current MIL-PRF-38535 requirements. - ro 09-10-20 C. SAFFLE REV SHET REV SHET REV STATUS REV A A A A A A A A A A A A A OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 PMIC N/A PREPARED BY RICK C. OFFICER DEFENSE SUP
2、PLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY RAJESH R. PITHADIA APPROVED BY MICHAEL A. FRYE MICROCIRCUIT, LINEAR, HIGH SPEED, CURRENT FEEDBA
3、CK AMPLIFIER, MONOLITHIC SILICON DRAWING APPROVAL DATE 94-07-08 AMSC N/A REVISION LEVEL A SIZE A CAGE CODE 67268 5962-94685 SHEET 1 OF 13 DSCC FORM 2233 APR 97 5962-E502-09 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING
4、 SIZE A 5962-94685 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A c
5、hoice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 94685 01 M P A Federal stock
6、class designator RHA designator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Leadfinish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the
7、 appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device
8、type Generic number Circuit function 01 HFA1120 High speed current feedback amplifier 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the re
9、quirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive desig
10、nator Terminals Package style P GDIP1-T8 or CDIP2-T8 8 Dual-in-line 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license fro
11、m IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94685 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Voltage between +VSand -VSterminals +12 V Differential input voltage . 5 V Voltage at either input termin
12、al . +VSto -VSOutput current (50% duty cycle) 55 mA Power dissipation (PD) 0.87 W at TA= +75C 2/ Storage temperature range . -65C to +150C Junction temperature (TJ) . +175C Lead temperature (soldering, 10 seconds) +300C Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Thermal resistance,
13、 junction-to-ambient (JA) +115C/W 1.4 Recommended operating conditions. Supply voltage (VS) . 5 V Load resistance (RL) . 50 Ambient operating temperature range (TA) . -55C to +125C 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards,
14、 and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEP
15、ARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these
16、documents are available online at http:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herei
17、n, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum level
18、s may degrade performance and affect reliability. 2/ Derate above TA= +75C at 8.7 mW/C. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94685 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION
19、LEVEL A SHEET 4 DSCC FORM 2234 APR 97 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the
20、QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design,
21、 construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outline. The case outline shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal conn
22、ections shall be as specified on figure 1. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full amb
23、ient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the
24、manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for d
25、evice classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The complian
26、ce mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein).
27、 For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing shall
28、affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V i
29、n MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2 herein) involving devices acquired t
30、o this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DSCC, DSCCs agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation
31、shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 49 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking pe
32、rmitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94685 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions 1/ -55C TA+125C Group A subgroups Devic
33、e type Limits 2/ Unit unless otherwise specified Min Max Input offset voltage VIOVCM= 0 V 1 01 -6 +6 mV 2, 3 -10 +10 Common mode rejection ratio CMRR VCM= 2 V, +V = 3 V and -V = -7 V, +V = 7 V and -V = -3 V 1 01 40 dB 2, 3 38Power supply rejection ratio +PSRR VS= 1.25 V, +V = 6.25 V and -V = -5 V, +
34、V = 3.75 V and -V = -5 V 1 01 45 dB 2, 3 42-PSRR VS= 1.25 V, +V = 5 V and -V = -6.75 V, +V = 5 V and -V = -3.75 V 1 45 2, 3 42Positive input current +IBSPVCM= 0 V 1 01 -40 40 A 2, 3 -65 65Positive input common mode sensitivity +ICMS VCM= 2 V, +V = 3 V and -V = -7 V, +V = 7 V and -V = -3 V 1 01 40 A/
35、V 2, 3 50 Input resistance +RIN3/ 1 01 25 k 2, 3 20Negative input current -IBSPVCM= 0 V 1 01 -50 50 A 2, 3 -75 75Negative input current adjust range -IBSPVCM= 0 V 4/ 1 01 -100 100 A ADJ 2, 3 -100 100 Negative input common mode sensitivity -ICMS VCM= 2 V, +V = 3 V and -V = -7 V, +V = 7 V and -V = -3
36、V 1 01 7 A/V 2, 3 10 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94685 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 6 DSCC FORM 2234 APR 9
37、7 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions 1/ -55C TA+125C Group A subgroups Device type Limits 2/ Unit unless otherwise specified Min Max Negative input power supply sensitivity -IPSS VCM= 1.25 V, +V = 6.25 V and -V = -5 V, +V = 3.75 V and -V = -5 V 1 01 15
38、A/V 2, 3 27 VCM= 1.25 V, +V = 5 V and -V = -6.75 V, +V = 5 V and -V = -3.75 V 1 15 2, 3 27 Output voltage swing VOPRL= 100 , AV= -1, VIN= -3.5 V 1 01 3 V RL= 100 , AV= -1, VIN= -3 V 2, 3 2.5 RL= 50 , AV= -1, VIN= -3 V 1, 2 2.5 RL= 50 , AV= -1, VIN= -2 V 3 1.5 VONRL= 100 , AV= -1, VIN= +3.5 V 1 -3 RL
39、= 100 , AV= -1, VIN= +3 V 2, 3 -2.5 RL= 50 , AV= -1, VIN= +3 V 1, 2 -2.5 RL= 50 , AV= -1, VIN= +2 V 3 -1.5 Output current 5/ +IOUT1, 2 01 50 mA 3 30 -IOUT1, 2 -503 -30See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STAN
40、DARD MICROCIRCUIT DRAWING SIZE A 5962-94685 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions 1/ -55C TA+125C Group A subgroups Device type Limits 2/ Unit unless ot
41、herwise specified Min Max Quiescent power supply current +ICCRL= 100 1 01 14 26 mA 2, 3 33 -ICC1 -26 -14 2, 3 -33-3 dB bandwidth 6/ 7/ BW VOUT= 200 mVPP, AV= -1, RF= 430 , TA= +25C 4 01 300 MHz VOUT= 200 mVPP, AV= +1, RF= 510 , TA= +25C 550 VOUT= 200 mVPP, AV= +2, TA= +25C 350 Gain flatness 6/ 7/ GF
42、 VOUT= 200 mVPP, AV= +2, RF= 510 , f 30 MHz, TA= +25C 4 01 -0.04 +0.04 dB VOUT= 200 mVPP, AV= +2, RF= 510 , f 50 MHz, TA= +25C -0.10 +0.10 VOUT= 200 mVPP, AV= +2, RF= 510 , f 100 MHz, TA= +25C -0.30 +0.30 Slew rate 6/ 7/ 8/ +SR (+1) VOUT= 5 VPP, AV= +1, RF= 510 , TA= +25C 4 01 1200 V/s -SR (+1) VOUT
43、= 5 VPP, AV= +1, RF= 510 , TA= +25C 1100 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94685 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 8
44、DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions 1/ -55C TA+125C Group A subgroups Device type Limits 2/ Unit unless otherwise specified Min Max Slew rate 6/ 7/ 8/ +SR (+2) VOUT= 5 VPP, AV= +2, RF= 510 , TA= +25C 4 01 1650 V/s -SR (+2) VOUT= 5 V
45、PP, AV= +2, RF= 510 , TA= +25C 1550 Overshoot 6/ 7/ 9/ +OS VOUT= 0.5 VPP, AV= +2, TA= +25C 4 01 25 % -OS VOUT= 0.5 VPP, AV= +2, TA= +25C 20 2nd harmonic distortion 6/ 7/ HD2 VOUT= 2 VPP, AV= +2, f = 30 MHz, TA= +25C 4 01 -48 dBc VOUT= 2 VPP, AV= +2, f = 50 MHz, TA= +25C -45 VOUT= 2 VPP, AV= +2, f =
46、100 MHz, TA= +25C -35 3rd harmonic distortion 6/ 7/ HD3 VOUT= 2 VPP, AV= +2, f = 30 MHz, TA= +25C 4 01 -65 dBc VOUT= 2 VPP, AV= +2, f = 50 MHz, TA= +25C -60 VOUT= 2 VPP, AV= +2, f = 100 MHz, TA= +25C -40 Rise time 6/ 7/ 8/ tRVOUT= 0.5 VPP, AV= +2, TA= +25C 9 01 1 ns Fall time 6/ 7/ 8/ tFVOUT= 0.5 VP
47、P, AV= +2, TA= +25C 9 01 1 ns See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94685 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 9 DSCC FORM 2
48、234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions 1/ -55C TA+125C Group A subgroups Device type Limits 2/ Unit unless otherwise specified Min Max Settling time 6/ 7/ tSVOUT= 2 V to 0 V, AV= +2, RF= 510 , 2 V step at 0.1 % of the final value, TA= +25C 9 01 20 ns VOUT= 2 V to 0 V, AV= +2, RF= 510 , 2 V step at 0.05 % of the final value, TA= +25C 33 1/ Unless otherw
