1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes in accordance with NOR 5962-R309-97. 97-10-22 Monica L. Poelking B Changes in accordance with NOR 5962-R005-99. 98-10-16 Raymond L. Monnin C Update boilerplate to MIL-PRF-38535 and updated appendix A. Editorial changes throughout. tmh 00-
2、08-01 Monica L. Poelking D Update radiation features in section 1.5, table IB SEP test limits, and paragraphs 4.4.4.1 4.4.4.4. Update boilerplate paragraphs to the current MIL-PRF-38535 requirements. - LTG 10-03-25 Thomas M. Hess REV SHET REV D D D D D D SHEET 15 16 17 18 19 20 REV STATUS REV D D D
3、D D D D D D D D D D D OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Thanh V. Nguyen DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMEN
4、T OF DEFENSE CHECKED BY Thanh V. Nguyen APPROVED BY Monica L. Poelking MICROCIRCUIT, DIGITAL, RADIATION HARDENED ADVANCED CMOS, QUAD 2-INPUT AND GATE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON DRAWING APPROVAL DATE 95-12-29 AMSC N/A REVISION LEVEL D SIZE A CAGE CODE 67268 5962-95657 SHEET 1 OF 20 DS
5、CC FORM 2233 APR 97 5962-E232-10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-95657 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scop
6、e. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice o
7、f Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 F 95657 01 V X C Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Leadfinish (see 1.2.5) /
8、(see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with t
9、he appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 ACTS08 Radiation hardened SOS, advanced CMOS, quad 2-input AND gate, TTL compatible inputs 02 ACTS08
10、-02 1/ Radiation hardened SOS, advanced CMOS, quad 2-input AND gate, TTL compatible inputs 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to t
11、he requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive
12、designator Terminals Package style C CDIP2-T14 14 Dual-in-line X CDFP3-F14 14 Flat pack 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. 1/ Device type 02 is the same as device type 01 except that the devi
13、ce type 02 products are manufactured at an overseas wafer foundry. Device type 02 is used to positively identify, by marketing part number and by brand of the actual device, material that is supplied by an overseas foundry. Provided by IHSNot for ResaleNo reproduction or networking permitted without
14、 license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-95657 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ 2/ 3/ Supply voltage range (VCC) -0.5 V dc to +7.0 V dc DC input voltage range (VIN) -0.5 V d
15、c to VCC+ 0.5 V dc DC output voltage range (VOUT) . -0.5 V dc to VCC+ 0.5 V dc DC input current, any one input (IIN). 10 mA DC output current, any one output (IOUT) . 50 mA Storage temperature range (TSTG) . -65C to +150C Lead temperature (soldering, 10 seconds) +265C Thermal resistance, junction-to
16、-case (JC): Case outline C . 24C/W Case outline X . 30C/W Thermal resistance, junction-to-ambient (JA): Case outline C . 74C/W Case outline X . 116C/W Junction temperature (TJ) +175C Maximum package power dissipation at TA= +125C (PD): 4/ Case outline C . 0.68 W Case outline X . 0.43 W 1.4 Recommend
17、ed operating conditions. 2/ 3/ Supply voltage range (VCC) +4.5 V dc to +5.5 V dc Input voltage range (VIN) +0.0 V dc to VCCOutput voltage range (VOUT) . +0.0 V dc to VCCMaximum low level input voltage (VIL) 0.8 V Minimum high level input voltage (VIH) . VCC/2 Case operating temperature range (TC) .
18、-55C to +125C Maximum input rise and fall time at VCC= 4.5 V (tr, tf) 10 ns/V 1.5 Radiation features. Maximum total dose available (dose rate = 50 - 300 rads (Si)/s) 3 x 105rads (Si) Single event phenomenon (SEP) effective linear energy threshold (LET) no upsets (see 4.4.4.4) 100 MeV/(cm2/mg) 5/ Dos
19、e rate upset (20 ns pulse) . 1 x 1011rads (Si)/s 5/ Latch-up None 5/ Dose rate survivability . 1 x 1012rads (Si)/s 5/ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Un
20、less otherwise specified, all voltages are referenced to GND. 3/ The limits for the parameters specified herein shall apply over the full specified VCCrange and case temperature range of -55C to +125C unless otherwise noted. 4/ If device power exceeds package dissipation capability, provide heat sin
21、king or derate linearly (the derating is based on JA) at the following rate: Case C 13.5 mW/C Case X 8.6 mW/C 5/ Guaranteed by design or process but not tested. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962
22、-95657 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 4 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified her
23、ein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microc
24、ircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksear
25、ch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this documen
26、t, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manu
27、facturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein
28、. 3.1.1 Microcircuit die. For the requirements for microcircuit die, see appendix A to this document. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, ap
29、pendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Truth table. The truth table shall be as specified on figure 2. 3.2.4 Logic diagram.
30、The logic diagram shall be as specified on figure 3. 3.2.5 Switching waveform and test circuit. The switching waveforms and test circuits shall be as specified on figure 4. 3.2.6 Radiation exposure circuit. The radiation exposure circuit shall be maintained by the manufacturer under document revisio
31、n level control and shall be made available to the preparing and acquiring activity upon request. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-95657 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990
32、 REVISION LEVEL D SHEET 5 DSCC FORM 2234 APR 97 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table IA and shall apply over the fu
33、ll case operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table IIA. The electrical tests for each subgroup are defined in table IA. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition,
34、 the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking
35、for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The com
36、pliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 her
37、ein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing s
38、hall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q an
39、d V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2 herein) involving devices acqui
40、red to this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DSCC, DSCCs agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documenta
41、tion shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 36 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networki
42、ng permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-95657 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 6 DSCC FORM 2234 APR 97 TABLE IA. Electrical performance characteristics. Test Symbol Test conditions 1/ -55C TC +125C unless othe
43、rwise specified Device type VCCGroup A subgroups Limits 2/ Unit Min Max High level output voltage VOHFor all inputs affecting output under test VIH= 2.25 V or VIL= 0.8 V For all other inputs VIN= VCCor GND IOH= -50 A All 4.5 V1, 2, 3 4.40 V M, D, P, L, R, F 3/ All 1 4.40 For all inputs affecting out
44、put under test VIH= 2.75 V or VIL= 0.8 V For all other inputs VIN= VCCor GND IOH= -50 A All 5.5 V1, 2, 3 5.40 M, D, P, L, R, F 3/ All 1 5.40 Low level output voltage VOLFor all inputs affecting output under test VIH= 2.25 V or VIL= 0.8 V For all other inputs VIN= VCCor GND IOL= +50 A All 4.5 V1, 2,
45、3 0.1 V M, D, P, L, R, F 3/ All 1 0.1 For all inputs affecting output under test VIH= 2.75 V or VIL= 0.8 V For all other inputs VIN= VCCor GND IOL= +50 A All 5.5 V1, 2, 3 0.1 M, D, P, L, R, F 3/ All 1 0.1 Input current high IIHFor input under test, VIN= 5.5 V For all other inputs VIN= VCCor GND All
46、5.5 V1 +0.5 A 2, 3 +1.0 M, D, P, L, R, F 3/ All 1 +1.0 Input current low IILFor input under test, VIN= GND For all other inputs VIN= VCCor GND All 5.5 V1 -0.5 A 2, 3 -1.0 M, D, P, L, R, F 3/ All 1 -1.0 Output current high (Source) IOH4/ For all inputs affecting output under test, VIN= 4.5 V or 0.0 V
47、 For all other inputs VIN= VCCor GND VOUT= 4.1 V All 4.5 V1 -12.0 mA 2, 3 -8.0 M, D, P, L, R, F 3/ All 1 -8.0 Output current low (Sink) IOL4/ For all inputs affecting output under test, VIN= 4.5 V or 0.0 V For all other inputs VIN= VCCor GND VOUT= 0.4 V All 4.5 V1 12.0 mA 2, 3 8.0 M, D, P, L, R, F 3
48、/ All 1 8.0 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-95657 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 7 DSCC FORM 2234 APR 97 TABLE IA. Electrical performance characteristics - Continued. Test Symbol Test conditions 1/ -55C TC +125C unless otherwise specified Device type VCCGroup A subgroups Limits 2/ Unit Min Max Quiescent supply current delta, TTL input levels ICC5/ For input under te
