1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Add limit for linear energy threshold (LET) with no latch-up in section 1.5. Update the boilerplate to the requirements of MIL-PRF-38535. Editorial changes throughout. - TVN 05-12-06 Thomas M. Hess B Update radiation features in sections 1.5 and
2、SEP table IB. Change the title. Update the boilerplate to the requirements of MIL-PRF-38535. Editorial changes throughout. - jak 12-05-01 Thomas M. Hess REV SHEET REV B B B B SHEET 15 16 17 18 REV STATUS OF SHEETS REV B B B B B B B B B B B B B B SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPAR
3、ED BY Joseph A. Kerby DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE AMSC N/A CHECKED BY Charles F. Saffle, Jr. APPROVED BY Monica L. Poelki
4、ng MICROCIRCUIT, DIGITAL, ADVANCED CMOS, RADIATION HARDENED, LOOK-AHEAD CARRY GENERATOR FOR COUNTERS, MONOLITHIC SILICON DRAWING APPROVAL DATE 97-02-21 REVISION LEVEL B SIZE A CAGE CODE 67268 5962-96576 SHEET 1 OF 18 DSCC FORM 2233 APR 97 5962-E246-12 Provided by IHSNot for ResaleNo reproduction or
5、networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 SIZE A 5962-96576 REVISION LEVEL B SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliabilit
6、y (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. 1.2 PIN. The PIN is
7、as shown in the following example: 5962 H 96576 01 V X A Federal RHA Device Device Case Lead stock class designator type class outline finish designator (see 1.2.1) (see 1.2.2) designator (see 1.2.4) (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked d
8、evices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device typ
9、e(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 54ACS264 Radiation hardened, look-ahead carry generator for counters 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level
10、 as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The c
11、ase outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16 16 Dual-in-line X CDFP4-F16 16 Flat pack 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-3
12、8535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 SIZE A 5962-96576 REVISION LEVEL B SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum r
13、atings. 1/ 2/ 3/ Supply voltage range (VDD) -0.3 V dc to +7.0 V dc DC input voltage range (VIN) -0.3 V dc to VDD + 0.3 V dc DC output voltage range (VOUT) . -0.3 V dc to VDD+ 0.3 V dc DC input current, any one input (IIN). 10 mA Latch-up immunity current (ILU) 150 mA Storage temperature range (TSTG)
14、 . -65C to +150C Lead temperature (soldering, 5 seconds) +300C Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Junction temperature (TJ) +175C Maximum power dissipation (PD) . 1.0 W 1.4 Recommended operating conditions. 2/ 3/ Supply voltage range (VDD) +4.5 V dc to +5.5 V dc Input volta
15、ge range (VIN) 0.0 V dc to VDDOutput voltage range (VOUT) . 0.0 V dc to VDDMaximum input rise or fall time at VDD= 4.5 V (tr, tf) 1 ns/V 4/ Case operating temperature range (TC) . -55C to +125C 1.5 Radiation features. 5/ Maximum total dose available (dose rate = 50 300 rads (Si)/s) 1 x 106Rads (Si)
16、Single event phenomenon (SEP): No SEU occurs at effective LET (see 4.4.4.4) . 80 MeV-cm2/mg 6/ No SEL occurs at effective LET (see 4.4.4.4) 120 MeV-cm2/mg 6/ Dose rate upset (20 ns pulse) 1 x 109Rads (Si)/s 6/ Latch-up . None 6/ Dose rate survivability 1 x 1012Rads (Si)/s 6/ 1/ Stresses above the ab
17、solute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Unless otherwise specified, all voltages are referenced to VSS. 3/ The limits for the parameters specified herein shall apply over the full spec
18、ified VDDrange and case temperature range of -55C to +125C unless otherwise specified. 4/ Derate system propagation delays by difference in rise time to switch point for tror tf 1 ns/V. 5/ Radiation testing is performed on the standard evaluation circuit (SEC). 6/ Limits are guaranteed by design or
19、process, but not production tested unless specified by the customer through the purchase order or contract. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 SIZE A 5962-9657
20、6 REVISION LEVEL B SHEET 4 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents
21、 are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Componen
22、t Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbi
23、ns Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Non-Government publications. The following document(s) form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. ASTM INTERNATIONAL
24、(ASTM) ASTM F1192 - Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of semiconductor Devices. (Copies of these documents are available online at http:/www.astm.org/ or from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken
25、, PA, 19428-2959). 2.3 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtai
26、ned. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form
27、, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimen
28、sions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified o
29、n figure 1. 3.2.3 Truth tables. The truth tables shall be as specified on figure 2. 3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3. 3.2.5 Switching waveforms and test circuit. The switching waveforms and test circuit shall be as specified on figure 4. Provided by IHSNot for
30、 ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 SIZE A 5962-96576 REVISION LEVEL B SHEET 5 DSCC FORM 2234 APR 97 3.3 Electrical performance characteristics and postirradiation parameter limits.
31、Unless otherwise specified herein, the electrical performance characteristics and post irradiation parameter limits are as specified in table IA and shall apply over the full case operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups s
32、pecified in table IIA. The electrical tests for each subgroup are defined in table IA. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space
33、limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL
34、-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For devi
35、ce classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved
36、 source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DLA Land and Maritime -VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-3853
37、5 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of mic
38、rocircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime -VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification a
39、nd review for device class M. For device class M, DLA Land and Maritime, DLA Land and Maritime s agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the
40、 reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 39 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROC
41、IRCUIT DRAWING DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 SIZE A 5962-96576 REVISION LEVEL B SHEET 6 DSCC FORM 2234 APR 97 TABLE IA. Electrical performance characteristics. Test Symbol Test conditions 1/ -55C TC +125C unless otherwise specified Device type VDDGroup A subgroups Limits 2/ Unit Mi
42、n Max High level input voltage VIH All 4.5 V 1, 2, 3 3.15 V M, D, P, L, R, F, G, H 3/ All 1 3.15 All 5.5 V 1, 2, 3 3.85 M, D, P, L, R, F, G, H 3/ All 1 3.85 Low level input voltage VIL All 4.5 V 1, 2, 3 1.35 V M, D, P, L, R, F, G, H 3/ All 1 1.35 All 5.5 V 1, 2, 3 1.65 M, D, P, L, R, F, G, H 3/ All
43、1 1.65 High level output voltage VOH For all inputs affecting output under test, VIN= VDDor VSSIOH= -100 A All 4.5 V 1, 2, 3 4.25 V M, D, P, L, R, F, G, H 3/ All 1 4.25 Low level output voltage VOL For all inputs affecting output under test, VIN= VDDor VSSIOL= 100 A All 4.5 V 1, 2, 3 0.25 V M, D, P,
44、 L, R, F, G, H 3/ All 1 0.25 Input current high IIH For input under test, VIN= VDDFor all other inputs, VIN= VDDor VSSAll 5.5 V 1, 2, 3 +1.0 A M, D, P, L, R, F, G, H 3/ All 1 +1.0 Input current low IIL For input under test, VIN= VSSFor all other inputs, VIN= VDDor VSSAll 5.5 V 1, 2, 3 -1.0 A M, D, P
45、, L, R, F, G, H 3/ All 1 -1.0 Output current (source) IOH4/ For output under test, VOUT= VDD - 0.4 V VIN= VDDor VSSAll 4.5 V and 5.5 V 1, 2, 3 -8.0 mA M, D, P, L, R, F, G, H 3/ All 1 -8.0 Output current (sink) IOL4/ For output under test, VOUT= 0.4 V VIN= VDDor VSSAll 4.5 V and 5.5 V 1, 2, 3 8.0 mA
46、M, D, P, L, R, F, G, H 3/ All 1 8.0 Quiescent supply current IDDQVIN= VDDor VSSAll 5.5 V 1, 2, 3 10.0 A M, D, P, L, R, F, G, H 3/ All 1 10.0 Short circuit output current IOS5/ 6/ VOUT= VDDand VSSAll 5.5 V 1, 2, 3 200 mA See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or n
47、etworking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 SIZE A 5962-96576 REVISION LEVEL B SHEET 7 DSCC FORM 2234 APR 97 TABLE IA. Electrical performance characteristics Continued. Test Symbol Test conditions 1/ -55C TC +125C unl
48、ess otherwise specified Device type VDDGroup A subgroups Limits 2/ Unit Min Max Input capacitance CINf = 1 MHz See 4.4.1c All 0.0 V 4 15.0 pF Output capacitance COUTf = 1 MHz See 4.4.1c All 0.0 V 4 15.0 pF Switching power dissipation PSW7/ CL= 50 pF, per switching output All 4.5 V and 5.5 V 4, 5, 6 2.2 mW/ MHz M, D, P, L, R, F, G, H 3/ All 4 2.2 Functional test 8/ VIH= 0.7 VDD, VIL= 0.3 VDD See 4.4.1b All 4.5 V and 5.5 V 7, 8 L H M, D, P, L, R, F, G, H 3/ All 7 L H Propagation delay time, CE to Cn tPLH19/ CL= 50 pF minimum See figure 4 A
