DLA SMD-5962-97511 REV D-2008 MICROCIRCUIT LINEAR WIDE INPUT VOLTAGE DUAL OPERATIONAL AMPLIFIER MONOLITHIC SILICON《微电路线性宽输入电压3单片两运算放大器》.pdf

上传人:outsidejudge265 文档编号:701176 上传时间:2019-01-01 格式:PDF 页数:12 大小:78.19KB
下载 相关 举报
DLA SMD-5962-97511 REV D-2008 MICROCIRCUIT LINEAR WIDE INPUT VOLTAGE DUAL OPERATIONAL AMPLIFIER MONOLITHIC SILICON《微电路线性宽输入电压3单片两运算放大器》.pdf_第1页
第1页 / 共12页
DLA SMD-5962-97511 REV D-2008 MICROCIRCUIT LINEAR WIDE INPUT VOLTAGE DUAL OPERATIONAL AMPLIFIER MONOLITHIC SILICON《微电路线性宽输入电压3单片两运算放大器》.pdf_第2页
第2页 / 共12页
DLA SMD-5962-97511 REV D-2008 MICROCIRCUIT LINEAR WIDE INPUT VOLTAGE DUAL OPERATIONAL AMPLIFIER MONOLITHIC SILICON《微电路线性宽输入电压3单片两运算放大器》.pdf_第3页
第3页 / 共12页
DLA SMD-5962-97511 REV D-2008 MICROCIRCUIT LINEAR WIDE INPUT VOLTAGE DUAL OPERATIONAL AMPLIFIER MONOLITHIC SILICON《微电路线性宽输入电压3单片两运算放大器》.pdf_第4页
第4页 / 共12页
DLA SMD-5962-97511 REV D-2008 MICROCIRCUIT LINEAR WIDE INPUT VOLTAGE DUAL OPERATIONAL AMPLIFIER MONOLITHIC SILICON《微电路线性宽输入电压3单片两运算放大器》.pdf_第5页
第5页 / 共12页
点击查看更多>>
资源描述

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Make changes to the VIClimits as specified under 1.3 and to the VDDcondition limits for subgroups 2, 3 under the VICRtest in Table I in accordance with N.O.R. 5962-R254-97. 97-03-26 R. MONNIN B Make change to the VDDcondition limit for subgroup 3

2、 under the VICRtest under Table I in accordance with N.O.R. 5962-R017-99. 98-12-22 R. MONNIN C Drawing updated to reflect current requirements. Redrawn. - ro 02-05-09 R. MONNIN D Five year review requirement. - ro 08-07-22 R. HEBER REV SHET REV SHET REV STATUS REV D D D D D D D D D D D OF SHEETS SHE

3、ET 1 2 3 4 5 6 7 8 9 10 11 PMIC N/A PREPARED BY RICK OFFICER DEFENSE SUPPLY CENTER COLUMBUS STANDARD MICROCIRCUIT DRAWING CHECKED BY RAJESH PITHADIA COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY RAYMOND MONNIN AND AGENCIES OF THE DE

4、PARTMENT OF DEFENSE DRAWING APPROVAL DATE 97-01-09 MICROCIRCUIT, LINEAR, WIDE INPUT VOLTAGE, DUAL OPERATIONAL AMPLIFIER, MONOLITHIC SILICON AMSC N/A REVISION LEVEL D SIZE A CAGE CODE 67268 5962-97511 SHEET 1 OF 11 DSCC FORM 2233 APR 97 5962-E337-08 Provided by IHSNot for ResaleNo reproduction or net

5、working permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-97511 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reli

6、ability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PI

7、N is as shown in the following example: 5962 - 97511 01 Q H A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marke

8、d devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device

9、type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 TLV2442M Rail-to-rail wide input voltage dual operational amplifiers 02 TLV2442AM Rail-to-rail wide input voltage dual operational amplifiers (enhanced VIO) 1.2.3 Device class designa

10、tor. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appe

11、ndix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style H GDFP1-F10 or CDFP2-F10 10 Flat pack P GDIP1-T8 or CDIP2-T8 8 Dual-in-line 2 CQCC

12、1-N20 20 Square leadless chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUI

13、T DRAWING SIZE A 5962-97511 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Supply voltage (VDD) . +12.0 V dc 2/ Differential input voltage (VID) . VDD3/ Input voltage, any input (VIN) -0.3 V to VDD2/ Input curr

14、ent, each input (IIN) 5.0 mA Output current (IOUT) 50.0 mA Total current into +VDD. 50.0 mA Total current out of -VDD50.0 mA Duration of short-circuit current at (or below) +25C . Unlimited 4/ Continuous total power dissipation (PD) 5/ Case H 675 mW Case P . 1050 mW Case 2 . 1375 mW Operating free-a

15、ir temperature range (TA) -55C to +125C Storage temperature range (TSTG) . -65C to +150C Lead temperature 1.6 mm (1/16 seconds) from case for 10 seconds . +260C Maximum junction temperature (TJ) . +150C Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 1.4 Recommended operating conditions

16、. Supply voltage (VDD) 2.7 V dc to 10.0 V dc Input voltage range (VIN) -VDDto +VDD- 1.3 V Common-mode input voltage (VIC) . -VDD+ 0.2 V to +VDD- 1.3 V Ambient operating temperature range (TA) . -55C to +125C _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Ex

17、tended operation at the maximum levels may degrade performance and affect reliability. 2/ All voltage values, except differential voltages, are with respect to the midpoint between +VDDand -VDD. 3/ Differential voltages are at the noninverting input with respect to the inverting input. Excessive cur

18、rent flows if the input is brought below -VDD- 0.3 V. 4/ The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. 5/ Above TA= +25C, derate by the following factors; case H at 5.4 mW/C, case P at 8.4

19、 mW/C, and case 2 at 11.0 mW/C. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-97511 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 4 DSCC FORM 2234 APR 97 2. APPLICABLE DOCU

20、MENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEF

21、ENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - Lis

22、t of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch/ or http:/assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, P

23、A 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

24、 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fi

25、t, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimension

26、s shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on fi

27、gure 1. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full ambient operating temperature range. 3

28、.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marke

29、d. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in a

30、ccordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be

31、 a “C“ as required in MIL-PRF-38535, appendix A. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-97511 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 5 DSCC FORM 2234 APR 97 T

32、ABLE I. Electrical performance characteristics. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Input offset voltage VIOVIC= 0 V, VDD= 1.5 V, 1 01 2000 V VO= 0 V, RS= 50 2,3 2500 1 02 950 2,3 1600 VIC= 0 V, VDD= 2.5 V, 1 01 2000 VO

33、= 0 V, RS= 50 2,3 2500 1 02 950 2,3 1600 Input offset current IIOVIC= 0 V, VDD= 1.5 V, VO= 0 V, RS= 50 2,3 All 150 pA VIC= 0 V, VDD= 2.5 V, VO= 0 V, RS= 50 150 Input bias current IIBVIC= 0 V, VDD= 1.5 V, VO= 0 V, RS= 50 2,3 All 260 pA VIC= 0 V, VDD= 2.5 V, VO= 0 V, RS= 50 260 Common-mode input volta

34、ge range VICR|VIO| 5 mV, RS= 50 , 1 All 0 to 2.25 V VDD= 3.0 V 2,3 0.2 to 2.0 |VIO| 5 mV, RS= 50 , 1 0 to 4.25 VDD= 5.0 V 2,3 0 to 4.0 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A

35、 5962-97511 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max High lev

36、el output voltage VOHIOH= -3 mA, VDD= 3.0 V 2,3 All 2.25 V IOH= -5 mA, VDD= 5.0 V 1,2,3 4.0 Low level output voltage VOLVIC= 0 V, IOL= 3 mA, VDD= 3.0 V 2,3 All 1.0 V VIC= 2.5 V, IOL= 5 mA, VDD= 5.0 V 1.25 Large signal differential voltage amplification AVDVIC= 1.5 V, 2/ VDD= 3.0 V, RL= 600 , 4 All 0

37、.7 V/mV VO= 1 V to 2 V 5,6 0.4 VIC= 2.5 V, 3/ VDD= 5.0 V, RL= 600 , 4 0.9 VO= 1 V to 4 V 5,6 0.5 4 65 Common mode rejection ratio CMRR VIC= VICRmin, VDD= 3.0 V, VO= 1.5 V, RS= 50 5,6 All 50 dB VIC= VICRmin, VDD= 5.0 V, VO= 2.5 V, RS= 50 4,5,6 70 Supply voltage rejection ratio (VDD/ VIO) kSVRVDD= 2.7

38、 V to 8 V, VIC= VDD/ 2, no load 4,5,6 All 80 dB VDD= 4.4 V to 8 V, VIC= VDD/ 2, no load 80 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-97511 DEFENSE SUPPLY CENTER COLUMBUS C

39、OLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Supply current IDDVO= 1.5 V, no load, 1,2,3 All 2.2

40、A VDD= 3.0 V VO= 2.5 V, no load, 2.2 VDD= 5.0 V Slew rate at unity gain SR VDD= 3.0 V, 4/ RL= 600 , CL= 100 pF, 4 All 0.65 V/s VO= 0.7 V to 2.3 V 5,6 0.4 VDD= 5.0 V, 5/ RL= 600 , CL= 100 pF, 4 0.75 VO= 1.0 V to 4.0 V 5,6 0.5 1/ All characteristics are measured with zero common mode input voltages un

41、less otherwise specified. 2/ Referenced to 1.5 V. 3/ Referenced to 2.5 V. 4/ Load resistance and load capacitance are referenced to 1.5 V. 5/ Load resistance and load capacitance are referenced to 2.5 V. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be

42、required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The

43、 certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appe

44、ndix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device

45、 class M. For device class M, notification to DSCC-VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DSCC, DSCCs agent, and the acquiring activi

46、ty retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in mic

47、rocircuit group number 73 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-97511 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 8 DSCC FORM 223

48、4 APR 97 Device types 01 and 02 Case outlines H P 2 Terminal number Terminal symbol 1 NC OUTPUT 1 NC 2 OUTPUT 1 -INPUT 1 OUTPUT 1 3 -INPUT 1 +INPUT 1 NC 4 +INPUT 1 -VDD/ GND NC 5 -VDD/ GND +INPUT 2 -INPUT 1 6 +INPUT 2 -INPUT 2 NC 7 -INPUT 2 OUTPUT 2 +INPUT 1 8 OUTPUT 2 +VDDNC 9 +VDD- NC 10 NC - -VDD/ GND 11 - - NC 12 - - +INPUT 2 13 - - NC 14 - - NC 15 - - -INPUT 2 16 - - NC 17 - - OUTPUT 2 18 - - NC 19 - - NC 20 - -

展开阅读全文
相关资源
猜你喜欢
  • AECMA PREN 3855-1995 Aerospace Series Pipe Couplings 60 Degrees Spherical in Titanium Alloy TI-P64001 Caps Edition P1《航空航天系列导管接头 60度球形钛合金TI-P64001CaPs》.pdf AECMA PREN 3855-1995 Aerospace Series Pipe Couplings 60 Degrees Spherical in Titanium Alloy TI-P64001 Caps Edition P1《航空航天系列导管接头 60度球形钛合金TI-P64001CaPs》.pdf
  • AECMA PREN 3856-1995 Aerospace Seriers Pipe Couplings 60 Degrees Spherical in Titanium Alloy TI-P64001 Swivel Nuts for Thrust Wire Edition P1《航空航天系列导管接头 60度球形钛合金TI-P64001旋转轴》.pdf AECMA PREN 3856-1995 Aerospace Seriers Pipe Couplings 60 Degrees Spherical in Titanium Alloy TI-P64001 Swivel Nuts for Thrust Wire Edition P1《航空航天系列导管接头 60度球形钛合金TI-P64001旋转轴》.pdf
  • AECMA PREN 3857-1995 Aerospace Series Pipe Couplings 60 Degrees Spherical in Titanium Alloy TI-P64001 Elbows 90 Degrees Welded Edition P1《航空航天系列导管接头 60度球形钛合金TI-P6400190度轴焊接》.pdf AECMA PREN 3857-1995 Aerospace Series Pipe Couplings 60 Degrees Spherical in Titanium Alloy TI-P64001 Elbows 90 Degrees Welded Edition P1《航空航天系列导管接头 60度球形钛合金TI-P6400190度轴焊接》.pdf
  • AECMA PREN 3858-1995 Aerospace Series Pipe Couplings 60 Degrees Spherical in Titanium Alloy TI-P64001 Thrust Wires in Steel FE-PA13 Edition P1《航空航天系列导管接头 60度球形钛合金TI-P64001插入线》.pdf AECMA PREN 3858-1995 Aerospace Series Pipe Couplings 60 Degrees Spherical in Titanium Alloy TI-P64001 Thrust Wires in Steel FE-PA13 Edition P1《航空航天系列导管接头 60度球形钛合金TI-P64001插入线》.pdf
  • AECMA PREN 3859-1993 Aerospace Series Titanium Alloy TI-P19001 Annealed Sheet and Strip Hot Rolled a Less Than or Equal to 6 mm Edition P 1《航空航天系列钛合金TI-P19001退火片和带热轧a小于或等于6mm》.pdf AECMA PREN 3859-1993 Aerospace Series Titanium Alloy TI-P19001 Annealed Sheet and Strip Hot Rolled a Less Than or Equal to 6 mm Edition P 1《航空航天系列钛合金TI-P19001退火片和带热轧a小于或等于6mm》.pdf
  • AECMA PREN 3860-1993 Aerospace Series Titanium Alloy TI-P19001 Annealed Sheet and Strip Cold Rolled a Less Than or Equal to 6 mm Edition P 1《航空航天系列钛合金TI-P19001退火片和带热轧a小于或等于6mm》.pdf AECMA PREN 3860-1993 Aerospace Series Titanium Alloy TI-P19001 Annealed Sheet and Strip Cold Rolled a Less Than or Equal to 6 mm Edition P 1《航空航天系列钛合金TI-P19001退火片和带热轧a小于或等于6mm》.pdf
  • AECMA PREN 3861-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Material Standard Thermally Tempered Soda Lime Float Glass Edition P 1《航空航天系列.非金属材料、玻璃透明度 材料标准、热钢化.pdf AECMA PREN 3861-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Material Standard Thermally Tempered Soda Lime Float Glass Edition P 1《航空航天系列.非金属材料、玻璃透明度 材料标准、热钢化.pdf
  • AECMA PREN 3862-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Material Standard Chemically Tempered Soda Lime Float Glass Edition P 1《航空航天系列.非金属材料、玻璃透明度 材料标准、化学.pdf AECMA PREN 3862-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Material Standard Chemically Tempered Soda Lime Float Glass Edition P 1《航空航天系列.非金属材料、玻璃透明度 材料标准、化学.pdf
  • AECMA PREN 3863-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Test Methods Determination of Flatness Edition P 1《航空航天系列.非金属材料、玻璃透明度 试验方法、平面度的测定》.pdf AECMA PREN 3863-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Test Methods Determination of Flatness Edition P 1《航空航天系列.非金属材料、玻璃透明度 试验方法、平面度的测定》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1