1、A-A-51 3 27 31 December 1985 COMMERCIAL ITEM DESCRIPTION CONNECTOR, SURGICAL TUBING TRAIGHT, PLASTIC The General Services Administration has authorized the use of this commercial item description in preference to Military Specification MIL-C-37908 dated 7 December 1978. The connector shall be fabric
2、ated of rigid transparent or translucent plastic and meet the requirements of the current USP for Class II plastic. parts per million extractable barium, calcium and lead. connector shall be capable of autoclaving - at 275 for 20 minutes without distortion or embrittlement. The connector shall have
3、no more than 5 The The connector shall be a straight, tapered tube measuring 3-112 + 1/2 inches in length, and shall have serrations for providing leakproof connection at each end for flexible tubing sized 3/16, 114, 5/16, 3/8, and 7/16 inch inside diameter. Workmanshie. The connector shall be exami
4、ned or symmetry of the tapered ends. The channel of the connector shall be examined for smoothness and obstructions to fluid flow, free from defects which detract from its appearance or impair its serviceability . The connector shall be - Unit;. Package (PG). One package containing fifty individual
5、connectors, as specified, constitutes one unit. FSC 6515 D9,$FR1BFXC)NSTAFiE;MEN,Ae is unlimited. AMSC N/A Approved for public release; distribution Licensed by Information Handling ServicesCOMMERCIAL ITEM DESCRTPTTON A-A-51327 Qual. i tx. .Assu rance. .Prwis ions. RemonefbiJ,its!.fc?r inspectian. U
6、nless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the perfor
7、mance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perzorm any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed Zequiremen
8、ts. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Governments request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery o
9、f the supplies to which such records Selate. Raagxds. Inspectian. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical an chemical
10、 properti of the item. specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics. lb Tasks. Tests shall be conducted to determine compliance with Caml31ingcrrteffta,., Sampling for tests shall be conducted in accordance with M
11、IL-STD-105 and as specified herein. Sampling for autoclavability shall be 5-2 with an AQL of 1.0, Sampling for Class II biological compatibility shall be in accordance with the USP. The unik of product for test purposes shall be one connector. CcznraekczCektif:icatisn. The contractor shall certify t
12、hat the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may b
13、e otherwise provided for under the provisions of the contract. 2 Licensed by Information Handling ServicesCOMMERCIAL ITEM DESCRIPTION A-A-51327 Regulakory requirements. FsderaLFoad, Drusr and.Cosmstic Act. If khe product covered by this document has been determined by the U.S. Food and Drug Administ
14、ration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractordsuppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall
15、comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations. recovered material in accordance with Public Law 94-580 to the maximum extent practical. Preservation, packaqinq,
16、P acking,Labelins, and markinq. Unless otherwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving ac
17、tivity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. package quantities and labeling and marking shall be as specified in the contract and/or order. Rec=overed.materials. The offeror/contractor is encouraged to use Intermediate and exterior
18、 NOTE: The following Nation Stock Number is covered by this document: NSN ITEM ,DGNTIFICATIQN - 6515-00-926-9201 Connector, Surgical, Tubing, Straight, Plastic MILITARY INTERESTS: Preparing Activity: Custodians: Army - MD Navy - MS Air Force - 03 DoD-MB Agent: DLA-DM Civil Agency Coordinating Activity: VA-oss PGC 46533 Project No. 6515-3484 Licensed by Information Handling Services
