1、A-A-53012 65 = 777777i.i 0027187 7 A-A-53 O 12 9 June 1987 COMMERCIAL ITEM DESCRIPTION SCISSORS, WIRE CUTTING (Angular) The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specification MIL-S-47022(DM), dated 23 September 1986,
2、 which is cancelled. This commercial item description covers an angular wire cutting scissors. Salient characteristics. Material. Scissors shall be manufactured from Class 4 martensitic corrosion-resistant steel in accordance with American Society for Testing and Materials (ASTM) Standard F899 . Har
3、dness. The scissor blades shall have a Rockwell hardness Of HRC 50-55. Style and desiqn. Scissors shall be in accordance with DPSC Drawing 24536. Both tips shall be blunt. Passivation. The scissors shall be properly passivated, Finish. The finish shall be mirror or satin. The finish shall be uniform
4、 and free from cracks, pits, crevices, burrs, and grind or tool marks, and dirt or polishing materials. Markings. The scissors shall be permanently marked with the manufacturers name or registered trademark and the word “stainless“. In addition, forceps of foreign manufacture shall bear the name of
5、the country of manufacture. Tests. Scissors shall be tested for corrosion-resistance, hardness, and performance as specified under Quality Assurance Provisions. AMSC N/A FSC 6515 DISTRIBUTION STATEMENT A. Approved for public release; 0 distribution is unlimited. , THIS DOCUMENT CONTAINS -) fl PAGES,
6、 . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53032 b5 4494374 0024190 5 U COMMERCIAL ITEM DESCRIPTION A-A-53012 Workmanship. The scissors shall be processed in such a manner as to be uniform and free from defects which affect life, utility,
7、 or appearance. Product Quality Level Visual and dimensional examination. Shall be examined to vexiy that design, construction and workmanship are in accorance with applicable requirements. Materias. The supplier shall be responsible for performing teste to assure that materials are in accordance wi
8、th requirements specified. Unit. Each (EA), One scissorts, as specilied, constitutes one unit of issue. Suality Aar;urgnce Provisions. the contract or purchase order, the contractor is responsible for the performance o all inspection requirements as specified herein, Except as otherwise speciEied in
9、 the contract or purchase order, the contractor may use his own ox any facilities suitable or the pereormance of the inspection requirements sgeeified herein, unless disapproved by the Government, The Government reserves the right to perform any of the inspections set forth in the specification wher
10、e such inspections are deemed necessary to assure supplies and services conform to prescribed reguiiements. Records. Records of examinations and tests performed by or fol: the contractor shall be maintained by the contractor: and made available to the Government upon the Governments request, at any
11、timer or from time to timer during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate, Inspection. Inspection, as used hereinr is defined as both examination (8uch as visual OF auditory investigation without the use of special
12、laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) sf the item. Examination. The scissors shall be examined to determine compliance with all requirements contained in this specification. Responsibility for inspection. Unless otherw
13、ise specified in 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53012 65 I 9999974 0029173 7 I COMMERCIAL ITEM DESCRIPTION A-A-53012 Tests. Tests shall be conducted to determine compliance with specification requirements. shall be used for the
14、 determination of two or more test characteristics. Where feasible, the same sample Sampling for tests. accordance with MIL-STD-105 and as specified herein. product or test purposes shall be one scissors. be level S-2, AQL 1.0. Sampling for tests shall be conducted in Sampling shall The unit of Test
15、s. Hardness. Rockwell hardness shall be tested in accordance with ASTM Standard E18 or ASTM Standards E92 and E140. resistance in accordance with the Resistance to Boil and Resistance to Copper Sulfate tests of Federal Specification Corrosion-resistance. Scissors shall be tested for corrosion GG-1-5
16、26 . Performance test. The scissors shall be tested in accordance with the scissors performance test of Federal Specification GG-1-526. Two separate tests shall be performed. The test material for the first test shall be an austenitic corrosion-resistant steel wire of 0.010 Ir 0.005 inches outside d
17、iameter. The cuts shall be made with the serrated portion.of the scissor jaws. The test for the second test shall be an austenitic corrosion- resistant steel wire of 0.0495 (minimum) inches outside diameter. The cuts shall be made with the notched portion of the scissor jaws. Each test shall consist
18、s of three separate cuts. The wire shall not bind or snag in the scissor jaw, nor shall the cut cause the wire tip to bend. There shall be no nicks or damage to the scissors caused by cutting. 0 After cutting, the jaws shall be examined. Contractor certification. The contractor shall certify that th
19、e Droduct offered meets the salient characteristics of this A- _- - description and conforms to the producers own drawings, specification, standard, and quality assurance practices. Government reserves the right to require proof of such conformance prior to first delivery aiid thereafter as may be o
20、therwise provided for under the provisions of the contract. The 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-COr.II.IERC%AL ITEM DESCRIPTION A-A-53 ?IL2 aulatsrueciui Lemen ts . by this document has been determined by the U. Food ancl Drug Aclni
21、nictratEsn to be under its jurisdiction, the sfferorfeontractor shall comply, and be responsible for conpl, iarice by its s ibc ont c a c t o r s/s upp3 i er 8, w i i: h the K eq ti i r ement s sf the Peeleiab Food, Drug and Cosmetic Act, as amendedr anil .cgu%ntins prsniulyated thereunder . Ln addi
22、tion, the cdfemE/contractor shall comply, and be responsibe for comf i an c e by it B B ubcon t E acto I: a/ a iippl i e E s , w i t= h the I eq u i rem en t s of a2.1 other- applicable ederal, State, arid local statutes, oxdint?iices, and regulations. *osmetic Act. I the product covered RecovereKma
23、&iiaIs. . The sfferoi/contractor is encouraged to we recovered material in accordance with Public Law 94-580 to the maximum extant practical . PrQsevation e ncka in packiny, labelinq, and mark*, Unese otherwise specified, preservation, packaging, and packing shall be to a degree of protection to pre
24、clude damage to containers and/or contents thereoe under normal shipping conditions, handling, etct, involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and ehal2. eonform to applicable carriers rules and regulations. Intermediate and exterio
25、r package quantities and labeling and marking shall be ao specified in the contract and/or older. NOTES : NOTE 1: The Eollowlng National Stock Number is covered by this document: NSN - 6515-01-151-1822 ITEM IDENTIFICATION SCISSORS, WIRE CUTTING, Angular, 4-3/4 Inches NOTE 2: Test material. Materia3
26、for the small wire performance teat may be purchased as size 3.0 (0.01 0.d) suture wire from: Davis and Geck -. Danbury, CT Ethican, Inc, c. Somerville, NJ rdesing data (Intermediate/exterior package quantities and labefing and marking must be specified in the contgact and/or ordex) 4 Provided by IH
27、SNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3 A-A-53012 65 I 9999774 0029173 O * COMMERCIAL ITEM DESCRIPTION A-A-53012 MILITARY INTERESTS: Preparing Activity: Custodians: Army - MD Navy - MS Air Force - 03 DoD-MB Agent: DLA-IIM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS PHS FDA-MPQAS PGC 59523 Project No. 6515-4047 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
