1、 A-A-530bb 66 9 7777774 OOL07L5 5 9 2- A-A-53 066 20 July 1987 CMMFRCIAL ITEM DECCRIPTION %e General Services Administration has authorized the use of this comercial item description. This cmercial item description covers requirements for one type of wide mouth, plastic, screw-cap bottle, suitable f
2、or storing laboratory solutions and corrosive liquids and as a shipping container. Salient characteristics: Shall be a wide mouth polyethylene or polypropylene bottle of square shape. Shall be of natural color. The bottles shall have a capacity of 32 ounces. of the bottle shall not extend above the
3、bottom level of the neck. The fill of the bottle shall be within +1/2, -0 ounce of the capacity specified. Shall have a wide mouth with continuous type conventionally used, thread finish. enough to readily permit filling and dispensing of the contents. Shall be cymetrical in shape and the walls shal
4、l be of uniform thickness. When placed on a plane moth surface the bottles shall be stable. The normal capacity point The mouth opening of the bottle shall be large The bottle shall be fitted with a one-piece molded polypropylene, screw cap. The screw cap shall be threaded with a continuous type thr
5、ead. Shall have a molded-in seal ring which makes a close fit with the finish of the bottle forming an effective seal. With the screw cap applied, hand tight, there shall be no leakage. To provide for firm gripping for removing and tightening of the screw cap, the outside vertical surface of the scr
6、ew cap shall have ribs. The bottle shall be furnished with the screw cap in place and shall be clean, dry and ready for use. Workmanship. The bottles and caps shall be free fran defects which detract from their appearance or impair their serviceability. AMSC N/A FSC 6640 DISIRIBTION SCATEMEM! A. App
7、roved for public release; distribution is unlimited. 1 of 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53066 - Unit, Package (E). uie package containing twenty-four 32 oz. bottles, as specified, constitutes one unit . (2uality Assurance Prov
8、isions. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirments as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for th
9、e performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed re
10、quirements, Responsibility for inspection, Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Governments request, at any time, or fran the to time, during the performance of the contract a
11、nd for a period of three years after delivery o the supplies to which such records relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratocy aRliances or procedures) and testing (detemination by tech
12、nical means of physical and chemical properties) of the item. Samplinq or tests. Sampling for tests shall be in accordance with ccxnnerciai practice. The unit of product for tests purposes shall be one unit, - %&s. Tests shail be conducted to determine compliance with specification requj.rements. Wh
13、ere feasible, the sane sample shall be used for the determination of two or more tests. Leakaqe test. Bottles shall be filled with water and closure shall be amlied, hand tight. The filled bottle shall be suspended in an inverted position for four hours at roan temperature. Any evidence of leakage s
14、hall be cause for rejection, As an alterate, the bottle can be tested for leakproof senrice at 2 psi for 2 minutes. leakproof , if no water escapes, the container is Contractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description
15、and conforms to the producers own drawings, specifications, standards, and quality assurance practices. !the Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 2 Provided by
16、IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-L. A-A-53066 66 W 7777774 0010717 7 W A-A-53066 Metric Products. Products manufactured to metric dimensions will be considered on an equal basis with those man&actured using inch-pound units, providing they fall wi
17、thin the tolerances specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this document are met. dimensions and those dimensions exceed the tolerances specified in the inch- pound units, a request should be made to the contracti
18、ng officer to determine if the product is acceptable. accepting or rejecting the product. If a product is manufactured to metric The contracting officer has the option of Requl atory r equ i rment s . Federal Food, Druq and Cosmetic Act. If the product covered by this document has been determined by
19、 the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppl.iers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. comply,
20、and be responsible for compliance by its subcontractors/suppliers, with the requirments of all other applicable Federal, State, and local statutes, ordinances, and regulations. recovered material in accordance with Public Law 94-580 to the maximum extent practical . In addition, the offeror/contract
21、or shall Recovered materials. The offeror/contractor is encouraged to use Preservation, packaging, pa cking, labeling, and markinq. specified, preservation, packaging, and pcking shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditi
22、ons, handling, etc., invol-ving shipnent fran the supply source to the receiving activity, plus reshipnent frm receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterior package quantities and labeling and marking shal be as specified in the contrac
23、t and/or order . Unless othemise NOIES: The following National Stock Number is covered by this docment: 6640-01-043-9148 Orderinq data. (Intermediate/exterior package quantities, labeling, and marking must be specified in the contract and/or order.) 3 Provided by IHSNot for ResaleNo reproduction or
24、networking permitted without license from IHS-,-,-A-A-53 066 MILITARY I-: Prepar Ag Activ Custodians z Amiy-m Navy - MS Air Force - 03 VA-OSS PHS a- DOD - MB Agent : DJi?HX4 a *ty : Project No. 6640-1444 Location: NCR Disk #3 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
