1、I A-A-53727 65 m 3937774 0032474 7 m .-. - A-A-53 9 27 22 June 1989 COMMERCIAL ITEM DESCRIPTION INFUSOR, PRESSURE, BLOOD-INTRAVENOUS BAG The General Services Administration has authorized the use of this commercial item description. This commerical item description covers expendable pressure infusor
2、s suitable for use with intravenous bags of 500 mi and 1000 mi capacity. Salient characteristics: General. Shall be an expendable pressure infusor bag for use with invasive blood pressure monitoring and intravenous infusion procedures. Infusor shall be suitable for use in an operating room environme
3、nt. Style, design and dimensions. The infusor bag shall be in accordance with Figure 1. Material. Infusor shall be a polyurethane coated nylon bag with an attached white netting (mesh) pocket of polyester material to enclose a blood or medication bag of the capacity shown on Figure 1. Construction.
4、Netting shown on Figure 1 shall allow visualization of enclosed bag contents. The braided polyester strap shall be provided to suspend the infusor. The piston type pressure gauge shall be provided at the bottom of the bag with a pressure range of O to 400 mm of Hg for measuring the bladder air press
5、ure. The gauge shall be color-coded and numerically marked to indicate infusor air pressure. Pressure markings shall be at least three in number and shall be provided at O mm Hg, 150 mm Hg and 300 mrn Hg. The gauge shall be clearly visible from 360 degrees. fabricated of ABS plastic with an acetal p
6、iston. Gauge body shall be The bladder and inflation blub shall be connected with approximately 15 inches of vinyl tubing. The inflation bulb shall be fabricated of rubber material and shall be furnished with metal valves fabricated of corrosion-resisting material tio allow the bag to be inflated. T
7、h stopcock shall be used to lock and release the bladder pressure and shall be fabricated of a polycarbonate body, polyethylene stem and an ABS cap. to withstand an air pressure of 600 mm Hg without leakage or other damage. The strap shall withstand a force of 6 lbs. without breaking, fraying, pulli
8、ng free from the bag or other damage. Force shall be applied to the strap,away from and on the longitudinal axis of the bag. The air system shall be designed AMSC N/A FSC 6515 DISTRIBUTION STATEMENT A. Approved for public release; d-istribution is unlimited. /- Y THIS DOCUMENT CONTAINS i“ PAGES. Pro
9、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-* 1“ A-A-5329 7 Workmanship. The infusors shall be free from efects which detract rom their appearance or impair their serviceability. Infusors shall be cet? from cuts, tears, discoloration or other damage
10、 - Unit. Each (EA) One infusor, as specified, constitutes one unit. Quality Assurance Provisions. contract or purchase orer, the contractor is responsible for the performance of all inspection requirements as specified herein. Except: as otherwise epecified in the contract or purchase ordec, the co
11、ntractor may use his own or any facilities suitable for the pexformance of the inspection requirements specifie herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set orth in the specification where euch inspections are deeme necessary t
12、o assure supplies an services eonform to prescribed requirements. Responsibility or Inspection. Unless otherwise specified in the Records. Records of examinations and tests performed by or for the contractor ehaZ1 be maintained by the contractor and made avaiLabLe to the Government upon the Governme
13、nts request, at any time, or from time to time, during the performance of the contract and for a period of thiee years after delivery of the supplies to which such records xslate. Znspeetion. Inspection, as used herein, is define8 as both examination (such as visual or auitory invescigation without:
14、 the use OE special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item. Sampling gor: tests. Sampling for tests shall be conducted in accozdance with MIL-STD-105 and as specified herein. The unit of product for test pur
15、poses chaL1 be one infusor. Sampling shall be inErpeetion level S-3 and an AQL of 2.5. Tests. Teet shall be conducted to determine compliance with specification requirements, Where feasible, the same sample shall be used or the determination of two or more test characteristics. Contractor certificat
16、ion. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to fir
17、st elivery and thereafter as may be otherwise provided for under the provisions of the contract, 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53727 65 9 3777774 0032L176 O A-A-53927 Metric products. Products manufactured to metric dimensions
18、 wili be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerances specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this document are met. If a product is manufac
19、tured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request. should be made to the contracting officer to determine if the product is acceptable. The contracting product. officer has the option of accepting o,r rejecting the Regulatory requ reme
20、nts. Federal Food, Drug and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements o
21、f the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall cornply, and be responsibe for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordina
22、nces, and regulations. Recovered mterials. The offeror/contractor is encouraged to use recovered material in accordance with Public Law 94-580; as amended, and as implemented, by Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. Preservation, packaging, packing, labeling,
23、and marking. Unless otherwise specified, preservation, packaging, and packing shail be to degree of piotection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving activity, plus reshipme
24、nt from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterior package quantities and -labeling and marking shall be as specified in the contract and/or order. NOTE: The document: NSN - following National Stock Numbers are covered by this 6515-0
25、1-28,-8162 ITEM IDENTIFICATION INFUSOR, Pressure, Biood- Intravenous Bag, Expendable, 500 ml 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-53927 b5 q7q 003497 2 M A-A-5 3 9 2 7 6515-01-280-8163 INFWCOR, Pressure, Blood- Intravenous Bag, Expen
26、dable, 1000 ml Ordering data (ntermediate/exterior package quantities and Labeling and marking must: be specified in the contract and/or order), MILITARY XNTERESTS: Preparing Activity: Custodians: DD-MB Army - MD Navy - MS Air Fome - 03 Agent: DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS PHS
27、FDA-MPQAS Project No, 6515-4613 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-t A .u I- L X O Q! a Y a a a W O W t- J L. 2 a Y W Q! a W t- o z 2 -3 m A-A-53727 65 M 7777774 0032178 1 W In I .- U U O O Ul A&-53927 U U e O O I Y b m cn a P - r ? Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
