1、A-A-54467 65 m 9999974 0062675 2 m A-A-54 4 67 30 September 1991 COMMERCIAL ITEM DESCRIPTION SPONGE, SURGICAL, GAUZE (COMPRESSED) The General Services Administration has authorized the use of this Commercial Item Description in preference to portions of Type I, portions of Classes A and B of Interim
2、 Federal Specification DDD-P-0054A (GSA-FSS). Salient Characteristics: Shall be nonsterile gauze sponges suitable for use in the treatment of injuries and in surgical procedures. Sponges shall be of the following types, as specified: TOLERANCE NUMBER FINISHED FOLDED TYPE SIZE (INCHES) INCH OF PLIES
3、1 2 3 4 by 4 4 by 8 2 by 2 - + 318 - + 1/4 - + 112 8 12 12 Sponges shall be fabricated from gauze meeting all requirements of Absorbent Gauze, USP, Type VII, except the filling count may be 8 to 11 threadclinch. of the piece of gauze from this the sponge is folded shall be as specified below, manner
4、 that the finished sponges shall not have any exposed raw edges or loose threads. Sponges shall be capable of being opened to the sizes specified below without exposing any raw edges or loose threads. The minimum area Sponges shall be folded in suchsa MINIMUM AREA OF GAUZE TYPE OPEN SIZE (INCHES) (
5、SOUARE INCHES 1 1 2 3 4 by 8 4 by 24 2 by 6 125 376 47 The contractor may, at his option, include a precount feature for each 10 or 20 sponges in each unit package. Any precount feature (if present) shall not deteriorate when autoclaved and any precount feature which is colored shall be colorfast wh
6、en autoclaved. Sponges shall be free of cuts, holes, tears, foreign matter and ravelings. AMSCNA FSC 6510 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54 4 67 Wo
7、rkmanship. Sponges shall be free from defects which detract from their appearance or impair their serviceability. Unit. Package (PG). One package containing 200 sponges of one size only, as specified, constitutes one unit. Quality Assurance Provisions. Responsibility for inspection, Unless otherwise
8、 specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the performance of the in
9、spection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. Records. Re
10、cords of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Governments request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the
11、supplies to which such records relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual and auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties)
12、of the item. Samplins for examination. Sampling for examination shall be conducted in accordance with MIL-STD-105 and as specified herein. Unit of product for examination purposes shall be one sponge. Sampling shall be Inspection level S-4 with an acceptable quality level (AQL) of 2.5 (percent defec
13、tive). Examination. Examination shall be conducted to determine compliance with specification requirements. Samglins for tests. Sampling for tests shall be conducted in accordance with MIL-STD-105 and as specified herein. Unit of product for test purposes shall be one sponge. Sampling shall be Inspe
14、ction level S-1 with an AQL of 2.5 (percent defective). 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-544b7 65 9999974 00b2b97 b A-A-54 4 6 7 Tests. Tests shall be conducted to determine compliance with specification requirements. Where feasi
15、ble, the same sample shall be used for the determination of two or more test characteristics. Contractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, a
16、nd quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Metric Products. Products manufactured to metric dimensions will be considered on an eq
17、ual basis with those manufactured using inch-pound units, providing they fall within the tolerance specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions an
18、d those dimensions exceed the tolerance specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting 0 the product. Requlatorv reauirements. Federal Food, Druq and Co
19、smetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and C
20、osmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations. 3 Provi
21、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-, I A-A-54467 65 9999974 00b269 : A-A-54467 Recovered materials. The offeror/contractor is encouraged to use recovered material in accordance with Federal Acquisition Regulation Subpart 23.4 to the maximum e
22、xtent practical. Preservation, packaclinq, P ackinq, labelincr and markinq. Unless otherwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc:, involving shipmen
23、t from the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterior package quantities and labeling and marking shall be as specified in the contract and/or order. NOTE: document : The
24、following National Stock Numbers are covered by this “ ITEM IDENTIFICATION TYPE 6510-00-782-2698 SPONGE, SURGICAL, GAUZE, 1 6510-00-782-2699 SPONGE, SURGICAL, GAUZE, 2 compressed, 4 by 4 inches, 200s Compressed, 4 by 8 inches, 200s 6510-00-782-2700 SPONGE, SURGICAL, GAUZE, 3 Compressed, 2 by 2 inche
25、s, 200s Ordering data. labeling and marking must be specified in the contract and/or order. Intermediate/exterior package quantities and I MILITARY INTERESTS: Custodians: PREPARING ACTIVITY: DoD - MB Army - MD Agent : Navy - MS Air Force - 03 DLA-DM CIVIL AGENCY COORDINATING ACTIVITY: VA-OSS PHS FDA-MPQAS PGC 05205 Project No. 6510-0783 4 8 - e Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
