1、COMMERCIAL ITEM DESCRIPTION Lamp, Incandescent A-A-54624 17 April 1992 The General ServiceS Administration has authorized the use of this Commercial Item Description. This commercial item description covers a 100 watt quartz, tungsten halogen incandescent lamp suitable for use as the visible light s
2、ource in a visible light dental curing system (see notes). - Salient characteristics: The lamp shall be an incandescent quartz, tungsten halogen type. The lamps reflector shall be a silicon dioxide coated mirror which is ellipsoidal in shape. The reflector shall be a white, cold light reflector whic
3、h provides maximum reflection of white light in the 400 nm to 700 nm wavelength range. Style, design and dimensions of the lamp shall be in accordance with Figure 1. The lamp shall be suitable for use in and dimensionally compatible with the visible light dental curing system (see notes). The lamp s
4、hall have a focal length of 26mm and a minimum light output of 600 mW/crn2. The lamp shall require an input of 12 VAC. The lamp shall have a minimum power rating of 100 watts. The lamp shall meet all applicable requirements of United Laboratories (UL) 544. The average lamp life shall be rated at a m
5、inimum of 50 statistical hours at rated voltage (12 volts, nominal), or a minimum o 10,000 curing cycles at rated voltage (12 volts, nominal). One curing cycle shall be defined as the lamp being on for 18 consecutive seconds. Each curing cycle shall be followed by 18 consecutive seconds with the lam
6、p off to allow cooling time between cycles. Workmanship. The lamps shall be free from defects which may detract from their appearance or impair their serviceability. AMSC N/A FSC 6240 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo re
7、production or networking permitted without license from IHS-,-,-_.II_ A-A-54624 62 E 9999974 0064873 b W Unit. Each (EA). One lamp, as specified, constitutes one unit. .overrirnent- upon the Government s request , at: any time, or from time to time, during the performance of the c*ont:ract and for a
8、 period of three years after the delivery of the supplies to which such records relate I.s.A.xn Inspec-tion, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboi-cltory appliances 01- procedures 1 and testing (determination by tech
9、nical means of physical and chemical proyert-ec 1 of the i.tcim. . S;3111!1:i-n.y,.f.- . _. . . _. gx-ami-at-i-v-o. Sampling for examination shall he uonducted in accordance with MIL-STD-105 , at inspection level II, except dimensions chal 1 he examined at inspection level S-2. The unit of product f
10、or exainination purposes shall he one lamp, as specified . Exaihatigr. Examination shall he conducted to determine r-onipl iarice with specification requirements. s.a-_foyt;.strs. Sampling for tests shall be conducted in accordarice with MIL-STD-105, at: Inspection Level S-2, and an accept-ahlci nui
11、riber of zero for a11 sample sizes. -. Tests. ._. - - Tesks shall be conducted to determine compliance with specif icatiori requirements. Where f eacible, th same sample shall he used for the determination of two or mor& test charact-er ist ics . ? * Provided by IHSNot for ResaleNo reproduction or n
12、etworking permitted without license from IHS-,-,-A-A-54624 62 9999974 O064872 A-A-5 462 4 Metric: products. Prodiicts rnariufac:t urd to oictric.: dimensions wi 11 be considered on an equal basis with those nianufactured using inchipound units, providing they fall within the i-:slerances specified u
13、sing conversion tables contained in the latest revision of Federal Standard No. 376, and all o-ther req1iirement.s of this document, are met. If a product is manufactured tc-) metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be maide to
14、 the contracting officer to determine if the KJi.CIdiict is acceptabl e. The contracting officer has the option of accepting or rejecting the product Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics
15、 of Lhis Commerical Item Description, and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided fo
16、r under the provisions of the contract. Iieaulatorv requirements Federal Food, Drus and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for complia
17、nce by its subcontractors/supplj.ers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and . regulations promulgated thereunder. In addition, t.he offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of
18、 all other applicable Federal, State, and local statutes, ordinances, and regulations. Recovered materials. The offeror/contractor is encouraged to use recovered material in accordance with Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. Preservation. Packasins, P ackins
19、, labelincr, and markinq. Unless otherwise specified, preservation, packaging and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving activity,
20、 plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterior package yuantities and labeling and marking shall be as specified in the contract and/or 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without
21、license from IHS-,-,- A-A-54624 62 = A-A-54624 order. NOTE: The follow,ng .National Stock Nuniber is covered by this document. 6240-01-315-3676 Lamp, incandescent NOTE 1: The following Natioria1 Stock Number is referenced by this document. 6520-01-296-5760 Curing System, Dental, Visible Light Orderi
22、na-.daCa 1ntermediate:exterior package quantities, labeling, and marking must be as specified in the contract and/or order. MILITARY INTERESTS: Preparing Activity: Army-MD Navy-MS Air Force-03 Agent: DLA-DM VA-OSS PHS FDA-MPQAS Project No. 6240-1307 Location: DC Disk# 1 ( LAMP 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54624 62 = 9999974 O064874 - II _ c 6Z96 -V-V Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
