1、flIL-P-232L (2) 0 7377906 0103816 = MILITARY SPECIF KATION * 14 - Technical“ Organic Coatings“. Substitute: “TT-T-548 Toluene; (Toluol) for use in Page 6, paragraph paragraph 5.2, Delete and,Substitute: “5.2 Marking. - Containers shall be marked in accordance with Specif-:atlon TT-P-143 for military
2、 agencies, with the added following data: and Federal stock number. instructions shall be as follows: contract numbers Also, marking pertaining to thinning and application “Paint must be thoroughly mixed or stirred before and during use, Apply only to a dry clean surface that has been pretreated wit
3、h a liberal coat of Wash Primer, peints or bare metal. tween coatso The orange Vinyl paint is to be used for initial and final coats; all alternate coats to be brown. Paint Thinner for thinning paint or cleaning equipment. Never apply over conventional Always allow a 30 minutes drying time be- Use o
4、nly Vinyl For spraying, gun air pressure should be at least 15 psi above liquid pressure. cover work areas with a vertical and horizontal pass of gun, This paint may be brushed. cross work more than once or attempt to brush out.“ Always clean gun before and after use, always Spread paint with full brush, do not - Preparing Activity: U.S. COAST GUARD 1.- . PAGES _- THIS DOCUMENT CONTAINS Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
