DS 2187-1982 Oil burning fan-assisted air heaters《风扇辅助的燃油空气加热器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 16063-32-2016 Methods for the calibration of vibration and shock transducers Resonance testing Testing the frequency and the phase response of accelerometers by means of sho.pdf

BS ISO 16063-41-2011 Methods for the calibration of vibration and shock transducers Calibration of laser vibrometers《震动和冲击传感器的校准方法 激光振动计的校准》.pdf

BS ISO 16063-42-2014 Methods for the calibration of vibration and shock transducers Calibration of seismometers with high accuracy using acceleration of gravity《振动和冲击传感器校准方法 采用重力加速.pdf

BS ISO 16063-43-2015 Methods for the calibration of vibration and shock transducers Calibration of accelerometers by model-based parameter identification《振动和冲击传感器校准方法 基于模型的参数识别的加速度.pdf

BS ISO 16063-45-2017 Methods for the calibration of vibration and shock transducers Part 45 In-situ calibration of transducers with built in calibration coil《振动和冲击传感器校准方法 第45部分 带内置.pdf

BS ISO 16065-1-2014 Pulps Determination of fibre length by automated optical analysis Polarized light method《纸浆 用自动光学分析法测定纤维长度 偏振光法》.pdf

BS ISO 16065-2-2014 Pulps Determination of fibre length by automated optical analysis Unpolarized light method《纸浆 采用自动光学分析对纤维长度的测定 非偏振光法》.pdf

BS ISO 16067-2-2004 Photography Electronic scanners for photographic images Spatial resolution measurements Film scanners《摄影 摄影图像用电子扫描仪 空间分辨率测量 胶片扫描仪》.pdf

BS ISO 16073-2011 Wildland firefighting personal protective equipment Requirements and test methods《野外消防个人防护装备 试验方法和要求》.pdf