DS EN 10205-1993 Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium chromium oxide coated steel《生产马口铁或敷有电解铬 氧化铬层的钢板用冷轧卷形黑钢板》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNAS-TRC-012-2017 管理体系认证机构认证业务范围分类指南.pdf

CNAS-TRC-013-2017 GB-T 24001-2015 环境管理体系 要求及使用指南》标准的主要变化及对相关要点的理解.pdf

CNAS-TRL-001-2012 医学实验室—测量不确定度的评定与表达.pdf

CNAS-TRL-002-2015 纺织品检测测量不确定度的评估及实例.pdf

CNAT-309 质量管理体系内审员培训教学大纲.pdf

CNCA CTS 0013-2010 微水雾滴灭火设备认证技术规范.doc

CNCA CTS0003-2010 地面用太阳电池组件主要部件技术条件 第1部分：接线盒.pdf

CNCA-00C-005 强制性产品认证实施规则 工厂质量保证能力要求.doc

CNCA-01C-010：2013 低压电器 低压成套开关设备.pdf