DS EN 3054-1994 Aerospace series-Bearings airframe rolling-Single row self-aligning roller bearings in steel cadmium plated-Dimensions and loads《航空航天系列 机身滚动轴承 单列自调准镀镉钢滚柱轴承 尺寸和负载》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7245-2009(2014) 5181 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating《测定含水总量和加热产生固化水的液体涂层中挥发物含量的标准试验方法》.pdf

ASTM D7246-2006 Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves《检测聚乙烯食品服务手套上小孔的标准试验方法》.pdf

ASTM D7246-2006(2011)e1 3819 Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves《检测食品行业用聚乙烯手套上破洞的标准试验方法》.pdf

ASTM D7246-2006(2015) 2156 Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves《检测食品行业用聚乙烯手套漏孔的标准试验方法》.pdf

ASTM D7247-2007a Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures《升温时评定层压板制品中胶粘剂剪切强度的标准试验方法》.pdf

ASTM D7247-2016 5795 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures《用于评估高温条件下胶合板产品粘结抗剪强度的标准试验方法》.pdf

ASTM D7247-2017 red 0625 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures《用于评估高温条件下胶合板产品中胶键的抗剪强度的标准试验方法》.pdf

ASTM D7248 D7248M-2007 Standard Test Method for Bearing Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens.pdf

ASTM D7248 D7248M-2008 781 Standard Test Method for Bearing Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens《承受 旁通用2种紧固样品的聚合物基质复合叠层碾压的交感.pdf