DS EN 526-1993 Inland navigation vessels Gangways with a length not exceeding 8 m Requirements types《内河航行船舶 长度不超过8米的跳板 要求，类型》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 3218-006-1995 Aerospace Series Connector Rectangular with Metallic Shells and Screw-Locking Part 006 Receptacle with Non-Removable Size 22 Solder Contacts Product Standa.pdf

AECMA PREN 3218-007-1995 Aerospace Series Connectors Rectangular with Metallic Shells and Screw-Locking Part 007 Plug with Rear-Removable Size 20 Crimp Contracts Product Standard E.pdf

AECMA PREN 3218-008-1995 Aerospace Series Connectors Rectangular with Metallic Shells and Screw-Locking Part 008 Receptacle with Rear-Removable Size 20 Crimp Contacts Product Stand.pdf

AECMA PREN 3218-009-1995 Aerospace Series Connectors Rectangular with Metallic Shells and Screw-Locking Part 009 Protective Covers for EN 3218-005 and EN 3218-007 Connectors Produc.pdf

AECMA PREN 3218-010-1995 Aerospace Series Connectors Rectangular with Metallic Shells and Screw-Locking Part 010 Protective Covers for EN 3218-006 and EN 3218-008 Connectors Produc.pdf

AECMA PREN 3218-011-1995 Aerospace Series Connectors Rectangular with Metallic Shells and Screw-Locking Part 011 Tool Insert Extraction for EN 3218-005 to EN 3218-008 Connectors Pr.pdf

AECMA PREN 3219-1988 Aerospace Series Heat Resisting Nickel Base Alloy (Ni-P101HT) Cold Worked and Softened Bar and Wire for Continuous Forging or Extrusion for Fasteners 3 Less Thu.pdf

AECMA PREN 3220-1988 Aerospace Series Heat Resisting Nickel Base Alloy (Ni-P101HT) Cold Worked and Softened Bar and Wire for Continuous Forging or Extrusion for Fasteners 3 Less Thu.pdf

AECMA PREN 3225-1-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 1 - General Requir.pdf