DS IEC 581-10-1987 High fidelity audio equipment and systems Minimum performance requirements Part 10 Headphones《高保真音响设备和系统 最低性能要求 第10部分 头戴式耳机》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 4384-1989 带R橡皮.pdf

HB 4385-1989 扭簧.pdf

HB 4386-1989 卡圈.pdf

HB 4387-1989 压缩弹簧.pdf

HB 4388-1989 模体组合冲模元件与组件技术条件.pdf

HB 4389-1989 加工钛合金、高温合金MJ螺纹螺栓用滚丝轮54型 d-3~39mm p=0.5~2mm.pdf

HB 439-1987 虎钳式夹具用钳口.pdf

HB 4390-1989 加工钛合金、高温合金MJ螺纹螺栓用滚丝轮45型 d=3~8mm p=0.5~1mm.pdf

HB 4391-1989 加工钛合金、高温合金MJ螺纹螺栓用滚丝轮技术条件.pdf