1、o U O U O OD u) I u. lu 9 STD-EIA SBOAOAC-ENGL 1998 m 3234600 0595991 T25 m AN SI/ IA- 58 O A O AC-1998 Approv8d: May 15, 1998 EIA SPECIFICATION Detail Specification for Fixed Metallized Polyethylene Terephthalate Film Dielectric DC Capacitors Axial Leaded EIA-580AOAC JUNE 1998 ELECTRONIC INDUSTRIES
2、 ALLIANCE IZNGINEEXJNG DEPARTMENT _ STD-EIA SBOAOAC-ENGL 1978 m 3234600 0575992 961 m NOTICE EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvemen
3、t of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or non-member of EIA from manufacturing or selling products not conforming to
4、 such Standards and Publications, nor shall the existence of such Standards and Publications preclude their volunary use by those other than EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by EL4 in accordance with the Am
5、erican National Standards Institute (ANSI) patent policy. By such action, EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This EIA Specification is considered to have International Standardization impl
6、ication, but the International Electrotechnical Commission activity has not progressed to the point where a valid comparison between the EIA Specification and the IEC document can be made. This Specification does not purport to address all safety problems associated with its use or all applicable re
7、gulatory requirements. It is the responsibility of the user of this SpecXication to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 2806, formulated under the cognizance of the HA P-2.2 Subcom
8、mittee on Plastic and Paper Dielectric) Published by oELECTRONIC INDUSTRIES ALLIANCE 1998 Engineering Department 250 Wilson Boulevard Arlington, VA 22201 PRICE: Please refer to the current Catalog of ELA, JEDEC, and TIA STANDARDS and ENGI“G PUBLICATIONS or call Global Engineering Documents, USA and
9、Canada (1-800-854-7179) International (303-397-7956) AU rights reserved Printed in U.S.A. _ - STDmEIA 5BOAOAC-ENGL 1998 m 3234b00 O595993 BTB m ELECTRONIC INDUSTRTES ASSOCIATION QC30041/US2 ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: QC 300000 (IEC 384-1) ELECTRONIC INDUSTRIES ASSO
10、CIATION ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE w“: QC 3 (IEC 384-1) W“E DWWNG: (SEE TABLE 1) D mar. QC300401AJSl QC300400 FIXED METALLIZED POLYETHYLZNE TEREPHTHALATEFILM DIELECTRIC DC CAPACITORS AXIAL LEADED ELECTRICAL CiRCU ASSESSMENT LEVEL E INFORMATION ABOUT MANWACTURERS WHO HAVE
11、 COMPONENTS QUALWIED TO THIS DETAIL, SPECIFICATION IS AVAILABLE IN THE QUAUFED PRODUCTS LIST. STD-EIA SBOAOAC-ENGL 1998 W 3234600 0595994 734 W EIA 580AOAC Page 1 SECTION 1: GENERAL DATA 1.1 Recommended method of mounting These components can have the terminais attached to conventionai substrates by
12、 conventionai techiques such as vapor-phase, reflow or wave soldering. 1.2 Dimensions Case size reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 Table 1.1 Dimensions (mm) 5 .O 6.0 6.5 6.5 6.8 7.0 7.0 7.5 7.9 8.0 8.0 8.1 8.
13、5 8.5 8.5 9.0 9.1 9.5 9.5 10.0 10.0 10.2 10.5 11.0 11.5 12.0 12.0 12.5 13.0 13.5 13.5 14.0 14.5 15.0 15.5 16.0 17.5 18.5 19.0 20.5 21.5 22.0 11.0 16.5 11.0 16.5 14.8 16.5 20.5 16.5 14.8 20.5 16.5 18.8 16.5 20.5 28.0 20.5 18.8 20.5 28.0 20.5 28.0 21.0 28.0 28.0 28.0 21 .o 28.0 28.0 33.0 28 .O 33 .O 3
14、3.0 33.0 33.0 33.0 33.0 33 .O 33.0 33.0 33.0 33.0 33.0 d (t 0.05) 0.6 O. 6 O. 6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 O. 8 0.8 0.8 O. 8 0.8 0.8 0.8 0.8 1 .o 1 .o 1 .o 1 .o 1 .o 1 .o 1 .o EIA 580AOAC Page 2 1.3 Ratings and characteristics Capa
15、citance range(C,j : Tolerance on rated capacitance: Rated voltage (Ud: Category voltage (,) Climatic category: Rated temperature: Maximum AC voltage: Maximum pulse rise time: Tangent of loss angle (i kHz 25 C): Insulation resistance Self inductance Terminations: 0.001 pF to 15.0 pF (See table 1. 2.)
16、 It 5%, k 10% and 4 20% See table 1.2. From 85 “C to 100 OC, Reduce U, 1.25% /“C 551 100/2 1 -55“ to 85C Combined peak AC and DC must not exceed rated DC voltage. See 1.5.3 or Fubl. 384-2. See table 1.3. C 1 pF: 0.010 See table 1.4 1 nH per 1 mm lead and capacitor length Solderable STD-EIA SBOAOAC-E
17、NGL L998 3234b00 0595996 507 m UR 50 - 63 1 O0 250 400 630 1000 EM 580AOAC Page 3 L max. s 16.5 19 - 20.6 26.5 -28.0 31.5 -33.0 4 2 1.5 1 5 3 2 1 10 7 4 2.5 13.5 10 6.5 4 20 15 10 6 50 30 15 10 Table 1.2-values of capacitanceand voltage related to case size* Case size , rated DC voltage (v) I *Small
18、er case sizes may be available. STD*EIA SBOAOAC-ENGL 1998 M 3234600 0595997 443 I UR o 30000 0.33 1000 100 0.1 2 1000 1.4 Related documents Generic Specification IEC Publication QC 300000 (384-1-1982). Fixed Capacitors for use in Electronic Equipment. Sectional Specification IEC Publication QC 30040
19、0 (384-2). Fixed Metallized Polyethylene Terephthalate Film Dielectric DC Capacitor. 1.5 Marking Marking all capacitors shall contain the capacitance value, capacitance tolerance and rated DC voltage. The minumum marking on the packaging will be the manufacturers name, capacitance value, capacitance
20、 tolerance and rated working DC voltage. 1.6 Ordering information Orders for capacitors covered by the specification shall contain, in clear or in coded form, the following minimum information: a) Rated capacitance b) Tolerance on rated capacitance c) Rated DC voltage d) e) Case size f) Packaging (b
21、ulk or taped) Number and issue reference of detail specification 1.7 Certified records of released lots Not required - STD-EIA SBOAOAC-ENGL 1998 3234b00 O595998 38T Capacitor diameter (-1 s 5.0 5.1 - 10.0 10.1 - 15.0 15.1 - 20.0 EIA 580AOAC Page 5 Component pitch (-1 5 10 15 20 1.8 Additional inform
22、ation (not for inspection purposes) 1.8.1 Packaging Components wiU be taped and reel packaged per EIA-RS-296-D. available in bulk if required. These components are also 1.9 Additional or increased severities to those specified in the generic and/or sectional specification. None. EIA 580AOAC Page 7 S
23、ECTION 2: INSPECTION REQUIREMENTS 2.1 Procedures 2.1.1 For qualifiation approval procedures shaU be in accordance with 3.4 of the Sectional Specification, QC 300400 (TEC Publication 384-2). For quality conformance inspection, the test schedule (tables 2.1-2.2) includes sampling , periodicity, severi
24、ties and requirements. The formation of inspection lots is covered by 3.5.1 of the Sectional Specification. 2.1.2 Table 2.1-Lot-by-lot inspection (gro Subclause number and :est* Group A, subgroup Al 4 Visualexamination 4.1 Dimensions Group A, subgroup A2 4.2.2 Capacitance 4.2.3 Tangent of loss agie
25、4.2.1 Voltage proof 4.2.4 Insulation resistance GroupB, subgroup B1 4.5 Solderability 4.5.2 Final measurements D or NDt ND - Conditions of test* Frequency: 1 ND = nondestructive. Inspection levels (IL) and acceptable quaiity levels (AQL) are selected from EC Publication 41O:Sampling plans and proced
26、ures for inspection by attributes Previous page is blank STD.EIA SBOAOAC-ENGL 1778 3234600 0576000 636 EIA 580AOAC Page 8 TABLE 2.2-Periodic tests Subclause number“ Group C inspection eriodic) subgroup CIA Part of sample of subgroup C1 4.1 Dimensions (detail) 4.3.1 Initial measurements 4.3 Robustnes
27、s of terminations 4.4 Resistance to soldering heat 4.4.2 Final measurements D or NDP D Conditions of test* Visual examination IEC 68 Test Ua Tensile 10N / 10s IEC 68 Test Tb Method: 1A 260 “C Duration 10 s Vid examinaiton Capacitance Tangent of loss angle Sample size performance 1 ve cycles duration
28、 = 30 min visuai examination vlethod of mounting: See 1.1 of his specification rocedure B4 requency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or acceleration: 98 m/s2 (whichever is the less severe) Toial duration: 6 h Visual examination Method of mounting: See 1.1 of this specification Acceleration:
29、490 m/s2 Duration of puise: 11 ms Puise shape: % sine wave Visual examination Capacitance Tangent of loss Insulation resistance Sample size performance C s 1 pF c 0.003; C 1 rU; Compared to values measured in 4.6.1. l STD-EIA SBOAOAC-ENGL 1778 m 3234600 O576002 409 m EIA 580AOAC Page 10 Subclause nu
30、mber* Subgroup C1 Combined sample of specimens of subgroups CIA ND = nondestructive p = periodically (in months); n = sample size; c = acceptance criterion (permitted number of defective) STD.EIA SBOAOAC-ENGL 1998 3234b00 0596005 118 Standard or Generic Specification Standard Prefix for all Numbers
31、Sectional Specification Designator Blank Detail Specification Designator ZLr IA STANDARD AND SPEClFlCATlON NUMBERING Detail Specification Designator . .- STANDARD - . A document that establishes engineering and technical requirements for processes, procedures, practices and methods that have been de
32、creed by authority or adopted by consensus. Standards may also be established for selection, application and design criteria for material. Standards and other documents not in the specification format use only the EIA basic numbering system as follows: IA-1 23 Original Standard EIA-I 23-1 Addendum t
33、o Original Standard EIA-123-A First Revision of original Standard incorporating ali Addenda SPECIFICATION A document prepared specifically to facilitate procurement which clearly and accurately describes the essential technical requirements for purchased material. Procedures necessary to determine t
34、hat the requirements for the purchased material covered by the specification have been met shall also be referenced or included. EIA Specifjcations use the following system: IA 1230000 EIA 123AOOO EiA 123AAOO ElA 123AAAA EIA 123OOAA is a Generic Specification is a Sectional Specification is a Blank
35、Detail Specification is a Detail Specification is a Detail Specification for which no Sectional or Blank Detail Specification was issued. NOTES: 1. Some older specifications may not have been converted to this numbering system. 2. See EP-l 1 “Guide for the Preparation of Specification Using IECQ-System Format,“ for more detail.
