1、 EIA STANDARD TP-58-A Temperature Life with Mechanical Loading for Connectors with Removable Contacts (Static Mechanical Load at Temperature) Test Procedure for Electrical Connectors EIA-364-58A (Revision of EIA-364-58) ANSI/EIA-364-58A-2003(R2009) Approved: August 7, 2003 Reaffirmed: December 2, 20
2、09 EIA-364-58A JULY 2003 ELECTRONIC COMPONENTS, ASSEMBLIES initial and post test 5.5 Load conditions (static) 5.6 Observations and measurement to be made before and after testing EIA-364-58A Page 4 6 Test documentation Documentation shall contain the details specified in clause 5, with any exception
3、s, and the following: 6.1 Title of test 6.2 Specimen description, including fixturing 6.3 Test equipment used, and date of last and next calibration 6.4 Values and observations 6.4.1 Visual examination 6.4.2 Monitoring measurements as specified in the referencing document 6.5 Contact locations befor
4、e and after test 6.6 Name of operator and date of test EIA Document Improvement Proposal If in the review or use of this document, a potential change is made evident for safety, health or technical reasons, please fill in the appropriate information below and mail or FAX to: Electronic Industries Al
5、liance Technology Strategy & Standards Department Publications Office 2500 Wilson Blvd. Arlington, VA 22201 FAX: (703) 907-7501 Document No. Document Title: Submitters Name: Telephone No.: FAX No.: e-mail: Address: Urgency of Change: Immediate: At next revision: Problem Area: a. Clause Number and/or Drawing: b. Recommended Changes: c. Reason/Rationale for Recommendation: Additional Remarks: Signature: Date: FOR EIA USE ONLY Responsible Committee: Chairman: Date comments forwarded to Committee Chairman:
