1、 EIA STANDARD Fixed Capacitors for Use in Electronic Equipment Part 24: Sectional Specification Surface Mount Fixed Tantalum Electrolytic Capacitors with Conductive Polymer Solid Electrolyte EIA-60384-24 (IEC 60384-24:2006, IDT) September 2014 ANSI/EIA-60384-24-2014 Approved: September 30, 2014 EIA-
2、60384-24 NOTICE EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with mi
3、nimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of ECIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards a
4、nd Publications preclude their voluntary use by those other than ECIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by ECIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action,
5、ECIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This EIA Standard is identical (IDT) with the International Standard IEC Publication 60384-24:2006: Fixed Capacitors for Use in Electronic Equipment Par
6、t 24: Sectional Specification Surface Mount Fixed Tantalum Electrolytic Capacitors with Conductive Polymer Solid Electrolyte. This document is the EIA Standard EIA-60384-24 2014 Edition 1: Fixed Capacitors for Use in Electronic Equipment Part 24: Sectional Specification Surface Mount Fixed Tantalum
7、Electrolytic Capacitors with Conductive Polymer Solid Electrolyte. The text, figures and tables of IEC 60384-24:2006 are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). These materials are subject to copyright claims of IEC and ECIA. No part of
8、 this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of ECIA. All requests pertaining to EIA-60384-24 2014 Edition 1: Fixed Capacitors for Use in Electronic Equipment Part 24: Sectional Specification Surface Mount Fixed Tanta
9、lum Electrolytic Capacitors with Conductive Polymer Solid Electrolyte should be submitted to ECIA at the address below. The IEC copyrighted material has been reproduced with permission from ANSI. The IEC Foreword and Introduction are not part of the requirements of this standard but are included for
10、 information purposes only. (From Standards Proposal No. 5269, formulated under the cognizance of the P-2.5 Committee on EIA Solid Electrolytic Capacitors Standards and given final approval by the Standards Steering Committee for Passive Electronic Components Standards (S-1). Published by Electronic
11、 Components Industry Association 2014 Standards any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closel
12、y with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant
13、 subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the tech
14、nical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum ext
15、ent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for a
16、ny equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committee
17、s and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
18、8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent ri
19、ghts. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-24 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. The text of this standard is based on the following documents: FDIS Report on
20、 voting 40/1731/FDIS 40/1754/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. EIA-60384-24 Page 2 IEC 60384 consists of the foll
21、owing parts, under the general title Fixed capacitors for use in electronic equipment: Part 1: Generic specification Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors Part 3: Sectional specification: Fixed tantalum chip capacitors Part 4: Se
22、ctional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte Part 5: Sectional specification: Fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3 000 V Selection of methods of test and general requirements Part 6: Sectional specification: Fixed
23、 metallized polycarbonate film dielectric d.c. capacitors Part 7: Sectional specification: Fixed polystyrene film dielectric metal foil d.c. capacitors Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 Part 9: Sectional specification: Fixed capacitors of ceramic dielec
24、tric, Class 2 Part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors Part 12: Sectional specification: Fixed polycarbonate film dielectric metal foil d.c. capacitors Part 13: Sectional specification: Fixed polypropylene film dielectric metal foi
25、l d.c. capacitors Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte Part 16: Sectional specification: Fixed metallized poly
26、propylene film dielectric d.c. capacitors Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors Part 18: Sectional specification: Fixed aluminium electrolytic chip capacitors with solid and non-solid electrolyte Part 19: Sectional specification: F
27、ixed metallized polyethylene-terephthalate film dielectric chip d.c. capacitors Part 20: Sectional specification: Fixed metallized polyphenylene sulphide film dielectric chip d.c. capacitors Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 Pa
28、rt 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 Part 23: Sectional specification: Fixed surface mount metallized polyethylene naphthalate film dielectric d.c. capacitors Part 24: Sectional specification: Surface mount fixed tantalum electrolyt
29、ic capacitors with conductive polymer solid electrolyte Part 25: Sectional specification: Surface mount fixed aluminium electrolyte capacitors with conductive polymer solid electrolyte All sectional specifications mentioned above do have one or more blank detail specifications being a supplementary
30、document, containing requirements for style, layout and minimum content of detail specifications. EIA-60384-24 Page 3 The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in
31、 the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. The contents of the corrigendum of October 2006 have been included in this co
32、py. EIA-60384-24 Page 4 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 24: Sectional specification Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte 1 General 1.1 Scope This part of IEC 60384 is applicable to tantalum electrolytic capacitors with c
33、onductive polymer solid electrolyte. These capacitors are primarily intended to be mounted direct on to substrates for hybrid circuits or to printed boards. Fixed tantalum electrolytic chip capacitors with solid (MnO2) are not included but are covered by IEC 60384-3. 1.2 Object The object of this st
34、andard is to prescribe preferred ratings and characteristics and to select from IEC 60384-1 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specif
35、ications referring to this sectional specification shall be of equal or higher performance level, because lower performance levels are not permitted. 1.3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edi
36、tion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60063:1963, Preferred number series for resistors and capacitors Amendment 1 (1967) Amendment 2 (1977) IEC 60068-1: Environmental testing Part 1: General and guidance IEC
37、 60068-2-14: Environmental testing Part 2-14: Tests Test N: Change of temperature IEC 60068-2-58:2004, Environmental testing Part 2-58: Tests Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) IEC 60384-1:1999,
38、Fixed capacitors for use in electronic equipment Part 1: Generic specification IEC 60410: Sampling plans and procedures for inspection by attributes ISO 3:1973, Preferred numbers Series of preferred numbers EIA-60384-24 Page 5 1.4 Information to be given in a detail specification Detail specificatio
39、ns shall be derived from the relevant blank detail specification. Detail specifications shall not specify requirements inferior to those of the generic, sectional or blank detail specification. When more severe requirements are included, they shall be listed in 1.9 of the detail specification and in
40、dicated in the test schedules, for example, by an asterisk. NOTE The information given in 1.4.1 may, for convenience, be presented in tabular form. The following information shall be given in each detail specification and the values quoted shall preferably be selected from those given in the appropr
41、iate clause of this sectional specification. 1.4.1 Outline drawing and dimensions There shall be an illustration of the surface mount capacitors as an aid to easy recognition and for comparison of the surface mount capacitors with others. Dimensions and their associated tolerances, which affect inte
42、rchangeability and mounting, shall be given in the detail specification. All dimensions shall preferably be stated in millimetres; however, when the original dimensions are given in inches, the converted metric dimensions in millimetres shall be added. Normally, the numerical values shall be given f
43、or the length, width and height of the body. When necessary, for example, when a number of case sizes are covered by a detail specification, the dimensions and their associated tolerances shall be placed in a table below the drawing. When the configuration is other than described above, the detail s
44、pecification shall state such dimensional information as will adequately describe the capacitors. 1.4.2 Mounting The detail specification shall give guidance on methods of mounting for normal use. Mounting for test and measurement purposes (when required) shall be in accordance with 4.3 of this sect
45、ional specification. 1.4.3 Rating and characteristics The ratings and characteristics shall be in accordance with the relevant clauses of this specification, together with the following. 1.4.3.1 Rated capacitance range See 2.2.1. NOTE When products approved to the detail specification have different
46、 ranges, the following statement should be added: “The range of capacitance values available in each voltage range is given in IEC QC 001005”. 1.4.3.2 Particular characteristics Additional characteristics may be listed, when they are considered necessary to specify adequately the component for desig
47、n and application purposes. 1.4.3.3 Soldering The detail specification shall prescribe the test methods, severities and requirements applicable for the solderability and the resistance to soldering heat tests. EIA-60384-24 Page 6 1.4.4 Marking The detail specification shall specify the content of th
48、e marking on the capacitor and on the package. Deviations from 1.6 of this sectional specification shall be specifically stated. 1.5 Terms and definitions For the purposes of this document, the terms and definitions of IEC 60384-1, as well as the following, apply. 1.5.1 surface mount capacitor capac
49、itor whose small dimensions and nature or shape of terminations make it suitable for surface mounting 1.6 Marking See IEC 60384-1, 2.4, with the following details: 1.6.1 The information given in the marking is normally selected from the following list; the relative importance of each item is indicated by its position in the list: a) polarity of the terminations (unless identified by the construction); b) rated capacitance; c) rated voltage (d.c. voltage may be indicated by the symbol or ); d) tolerance on rated capacitance; e) year and m
