1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 10169:2010Continuously organic coated(coil coated) steel flat products Technical delivery conditions+A1:2012BS EN 10169:2010+A1:2012National forewordThis British Standard i
2、s the UK implementation of EN 10169:2010+A1:2012. It supersedes BS EN 10169:2010, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered
3、by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee ISE/109, Coated and Uncoated Flat Products to be Used for Cold Forming.A list of organizations represented on this committee can be obtained on request to its secretary.This publicatio
4、n does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012. Published by BSI Standards Limited 2012.ISBN 978 0 580 76373 1ICS 25.220.60; 77.140.50Compliance with a British Standard cannot confer
5、immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2010.Amendments/corrigenda issued since publicationDate Text affected30 April 2012 Implementation of CEN amendment A1:2012BRITISH STANDARDEUROPEAN STA
6、NDARD NORME EUROPENNE EUROPISCHE NORM EN 10169:2010+A1 March 2012 ICS 25.220.60; 77.140.50 Supersedes EN 10169:2010English Version Continuously organic coated (coil coated) steel flat products - Technical delivery conditions Produits plats en acier revtus en continu de matires organiques (prlaqus) -
7、 Conditions techniques de livraisonKontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl - Technische Lieferbedingungen This European Standard was approved by CEN on 7 August 2010 and includes Amendment 1 approved by CEN on 14 February 2012. CEN members are bound to com
8、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELE
9、C Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the s
10、ame status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
11、Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and
12、by any means reserved worldwide for CEN national Members. Ref. No. EN 10169:2010+A1:2012: EEN 10169:2010+A1:2012 (E) 2 Contents Page Foreword 4g31g3 Scope 5g32g3 Normative references 5g33g3 Terms and definitions .7g34g3 Designation . 12g35g3 Information to be supplied by the purchaser 13g35.1g3 Mand
13、atory information . 13g35.2g3 Options 14g36g3 Requirements 14g36.1g3 General . 14g36.1.1g3 Steel substrates 14g36.1.2g3 Organic coatings. 15g36.1.3g3 Manufacturing process 16g36.2g3 General coating properties 16g36.2.1g3 General . 16g36.2.2g3 Coating thickness and tolerances 17g36.2.3g3 Appearance .
14、 18g36.2.4g3 Adhesive strength after cupping or bending . 19g36.2.5g3 Coating hardness 19g36.2.6g3 Other coating and performance properties . 19g36.3g3 Special coating properties . 19g36.3.1g3 General . 19g36.3.2g3 Product flexibility 19g36.3.3g3 Durability . 20g36.4g3 Freedom of defects . 23g37g3 I
15、nspection 23g37.1g3 Types of inspection and inspection documents . 23g37.2g3 Test units . 23g37.3g3 Type and number of tests 23g37.4g3 Sampling 24g37.5g3 Test methods . 24g37.5.1g3 General . 24g37.5.2g3 Coating thickness . 24g37.5.3g3 Colour and colour difference . 24g37.5.4g3 Gloss 25g37.5.5g3 Adhe
16、sive strength/flexibility 25g37.5.6g3 Inspection on defects . 25g37.5.7g3 Coating hardness 25g37.5.8g3 Testing on durability 26g37.6g3 Retests . 28g38g3 Marking 28g39g3 Packing and dispatch . 28g310g3 Storage . 28g3Annex A (informative) Types of ambience . 29g3Annex B (informative) Coating materials
17、 . 32g3BS EN 10169:2010+A1:2012EN 10169:2010+A1:2012 (E) 3 Annex C (informative) Types of atmosphere (see also EN ISO 12944-2) 33g3Annex D (informative) Outdoor exposure sites 34g3Annex E (informative) Storage . 36g3Bibliography 37g3BS EN 10169:2010+A1:2012EN 10169:2010+A1:2012 (E) 4 Foreword This d
18、ocument (EN 10169:2010+A1:2012) has been prepared by Technical Committee ECISS/TC 109 !“Coated and uncoated flat products to be used for cold forming”“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an ide
19、ntical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be
20、 held responsible for identifying any or all such patent rights. This document supersedes !EN 10169:2010“. This document includes Amendment 1 approved by CEN on 2012-02-14. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. According to the CEN/CENEL
21、EC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania
22、, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 10169:2010+A1:2012EN 10169:2010+A1:2012 (E) 5 1 Scope This European Standard specifies requirements for continuously organic coated (coil coated)
23、steel flat products. It particularly specifies the performance requirements. The products covered are wide strip, sheet cut from wide strip, slit wide strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip). NOTE This document is not applicable to continuously organic co
24、ated flat products made of: tinmill products, electrical steels. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced docume
25、nt (including any amendments) applies. EN 10020:2000, Definition and classification of grades of steel EN 10021:2006, !General technical delivery conditions for steel products“ EN 10025-1, Hot-rolled products of structural steels Part 1: General technical delivery conditions EN 10025-2, Hot-rolled p
26、roducts of structural steels Part 2: Technical delivery conditions for non-alloy structural steels EN 10048, Hot rolled narrow steel strip Tolerances on dimensions and shape EN 10051, Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels Tolerances on dimensions and s
27、hape EN 10079:2007, Definition of steel products EN 10111, Continuously hot rolled low carbon steel sheet and strip for cold forming Technical delivery conditions EN 10130, Cold rolled low carbon steel flat products for cold forming Technical delivery conditions EN 10131, Cold rolled uncoated and zi
28、nc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming Tolerances on dimensions and shape EN 10139, Cold rolled uncoated mild steel narrow strip for cold forming Technical delivery conditions EN 10140, Cold rolled narrow steel strip Toleranc
29、es on dimensions and shape EN 10143, Continuously hot-dip coated steel sheet and strip Tolerances on dimensions and shape EN 10152, Electrolytically zinc coated cold rolled steel flat products for cold forming Technical delivery conditions EN 10204:2004, Metallic products Types of inspection documen
30、ts EN 10268, Cold rolled steel flat products with high yield strength for cold forming Technical delivery conditions BS EN 10169:2010+A1:2012EN 10169:2010+A1:2012 (E) 6 prEN 10338:2007, Hot rolled and cold rolled non-coated flat products of multiphase steels for cold forming Technical delivery condi
31、tions EN 10346, Continuously hot-dip coated steel flat products Technical delivery conditions EN 13523-0, Coil coated metals Test methods Part 0: General introduction and list of test methods EN 13523-1, Coil coated metals Test methods Part 1: Film thickness EN 13523-2, Coil coated metals Test metho
32、ds Part 2: Specular gloss EN 13523-3, Coil coated metals Test methods Part 3: Colour difference Instrumental comparison EN 13523-4, Coil coated metals Test methods Part 4: Pencil hardness EN 13523-5, Coil coated metals Test methods Part 5: Resistance to rapid deformation (impact test) EN 13523-6, Co
33、il coated metals Test methods Part 6: Adhesion after indentation (cupping test) EN 13523-7, Coil coated metals Test methods Part 7: Resistance to cracking on bending (T-bend test) EN 13523-8, Coil coated metals Test methods Part 8: Resistance to salt spray (fog) EN 13523-9, Coil coated metals Test m
34、ethods Part 9: Resistance to water immersion EN 13523-10, Coil coated metals Test methods Part 10: Resistance to fluorescent UV light and water condensation EN 13523-11, Coil coated metals Test methods Part 11: Resistance to solvents (rubbing test) EN 13523-12, Coil coated metals Test methods Part 1
35、2: Resistance to scratching EN 13523-14, Coil coated metals Test methods Part 14: Chalking (Helmen method) EN 13523-15, Coil coated metals Test methods Part 15: Metamerism EN 13523-18, Coil coated metals Test methods Part 18: Resistance to staining EN 13523-19, Coil coated metals Test methods Part 1
36、9: Panel design and method of atmospheric exposure testing EN 13523-21, Coil coated metals Test methods Part 21: Evaluation of outdoor exposure panels EN 13523-22, Coil coated metals Test methods Part 22: Colour difference Visual comparison EN 13523-23, Coil coated metals Test methods Part 23: Colou
37、r stability in humid atmospheres containing sulphur dioxide EN 13523-24, Coil coated metals Test methods Part 24: Resistance to blocking and pressure marking EN 13523-25, Coil coated metals Test methods Part 25: Resistance to humidity EN 13523-26, Coil coated metals Test methods Part 26: Resistance
38、to condensation of water EN 13523-27, Coil coated metals Test methods Part 27: Resistance to humid poultice (Cataplasm test) EN ISO 2815, Paints and varnishes Buchholz indentation test (ISO 2815:2003) BS EN 10169:2010+A1:2012EN 10169:2010+A1:2012 (E) 7 EN ISO 4618:2006, Paints and varnishes Terms an
39、d definitions (ISO 4618:2006) EN ISO 4628-2, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering (ISO 4628-2:2003) EN ISO 4628-4, Paints and varnishes Eval
40、uation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking (ISO 4628-4:2003) EN ISO 4628-5, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of de
41、fects, and of intensity of uniform changes in appearance Part 5: Assessment of the degree of flaking (ISO 4628-5:2003) EN ISO 8044:1999, Corrosion of metals and alloys Basic terms and definitions (ISO 8044:1999) EN ISO 9227, Corrosion tests in artificial atmospheres Salt spray tests (ISO 9227:2006)
42、EN ISO 12944-2:1998, Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 2: Classification of environments (ISO 12944-2:1998) ISO 4997, Cold-reduced carbon steel sheet of structural quality 3 Terms and definitions For the purpose of this document, the terms
43、 and definitions given in EN 10020:2000, EN 10021:2006, EN 10079:2007, EN 10204:2004, EN ISO 4618:2006, EN ISO 8044:1999, EN ISO 12944-2:1998 and the following apply. 3.1 accessibility ease of access to the steel components for the purpose of inspection and maintenance without any work over and abov
44、e that concerned with routine inspection 3.2 ambience environmental conditions which prevail in the interior of the building NOTE 1 These conditions determine the corrosivity category of the ambience and include different parameters such as the air temperature, the relative humidity, the operating c
45、onditions in the building (e.g. use of aggressive chemical products, refrigerated areas). NOTE 2 It should be noted that the atmosphere surrounding the building can influence the ambience. NOTE 3 Annex A gives an example of classification of types of ambience. 3.3 building interior application appli
46、cation in buildings for which the concerned construction products (i.e. components of the building fabric) are submitted to the influence of interior ambiences without significant exposure of any side of the product to the influence of exterior atmospheres NOTE 1 Building products include, for examp
47、le: liner trays, ribbed profiles for roofing and walling, curved profiles, brake-pressed profiles, interior wall panels for partitions, ceiling panels, suspended frames (for suspended ceilings), factory foamed (or mineral wool) sandwich panels for cold rooms or rooms with controlled ambience, interi
48、or door frames, interior metal doors, interior metal windows. BS EN 10169:2010+A1:2012EN 10169:2010+A1:2012 (E) 8 NOTE 2 Some coil coated products can be used for interior applications having special performance requirements, e.g. lighting. In such cases, these particular requirements should also be
49、 considered in consultation with the manufacturer. NOTE 3 For interior building elements, it is important that the risk of corrosive attack on the reverse side of the element should also be considered. This can be especially important in double-skin assemblies (e.g. built up insulated cladding) where the reverse side of the interior element is not easily accessible for maintenance and/or in situations where the
