1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 1034-16:2012Safety of machinery Safetyrequirements for the designand construction of papermaking and finishing machinesPart 16: Paper and board making machinesBS EN 1034-16
2、:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1034-16:2012.The UK participation in its preparation was entrusted to TechnicalCommittee MCE/3/9, Paper and printing machines - Safety.A list of organizations represented on this committee can beobtained on r
3、equest to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 74703 8ICS 85.100Compliance with a British St
4、andard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2012.Amendments issued since publicationDate Text affectedBS EN 1034-16:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1034-
5、16 March 2012 ICS 85.100 English Version Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines Scurit des machines - Prescriptions de scurit pour la conception et la construction de machines de fabr
6、ication et de finition du papier - Partie 16: Machines papier et carton Sicherheit von Maschinen - Sicherheitstechnischeanforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrstung -Teil 16: Papier- und Kartonmaschinen This European Standard was approved by CEN on 8 Januar
7、y 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtai
8、ned on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN
9、-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
10、Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rig
11、hts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1034-16:2012: EBS EN 1034-16:2012EN 1034-16:2012 (E) 2 Contents Page Foreword 4Introduction . 51 Scope 62 Normative references 63 Terms and definitions . 84 List of significant hazards 145 Safet
12、y requirements and/or measures 165.1 General 165.2 Workplaces, means of access, walkways, passageways 165.3 Start-up warning device 175.4 Emergency stop device and braking system 185.5 Isolation and energy dissipation, prevention of unexpected start-up . 195.6 Electric drive system and power transmi
13、ssion elements 195.7 Control system and actuators 195.8 Electrical equipment 225.9 Hydraulic equipment . 225.10 Pneumatic equipment . 225.11 Equipment and measures for make-ready, maintenance and lubrication . 225.12 Equipment and measures for cleaning and removal of broke 235.13 Noise . 245.14 Hot
14、surfaces . 245.15 Integrated lighting 255.16 Ergonomic principles 255.17 Chemical substances 255.18 Fire 255.19 Rolls, outer rolls. 265.20 Water jet knives, tail cutters, severing knives, rotary knives . 275.21 Machine-specific tools 275.22 Drying cylinders, steam and condensate systems 285.23 Whole
15、 body access to confined spaces 285.24 Tail and web threading equipment . 285.25 Felts and wires, clothing, fabrics . 305.26 Head box, wire section, former 305.27 Press section 325.28 Drying section 325.29 Film size presses, size presses, coating units . 345.30 Flotation dryers 355.31 Infrared dryer
16、s 365.32 Calenders (in-line calenders) 375.33 Measuring unit . 385.34 Reel up section 385.35 Roll handling equipment in the reel up section 425.36 Pulpers and their loading facilities 425.37 Integrated sheeter 426 Verification of safety requirements and/or measures 437 Information for use 437.1 Gene
17、ral information . 437.2 Instruction handbook 437.3 Marking . 45BS EN 1034-16:2012EN 1034-16:2012 (E) 3 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 46Bibliography 47Figures Figure 1 Example for paper and board making mac
18、hines (safety devices are not shown) . 9Figure 2 Example for a wire section (safety devices are not shown) . 10Figure 3 Example for a press section (safety devices are not shown) 11Figure 4 Example for a drying section (safety devices are not shown) . 12Figure 5 Example for a reel up section (safety
19、 devices are not shown) 13Figure 6 Safety distance 2,70 m on drum reeler 39Figure 7 Safety distance 500 mm to prevent crushing by reels behind the drum reeler 41Tables Table 1 List of significant hazards . 14Table 1 (continued) . 15Table 1 (continued) . 16Table 2 List of safety functions, Performanc
20、e Level and Safety Integrity Level specified in this European Standard . 21Table 3 Methods used to verify safety requirements and/or measures . 43BS EN 1034-16:2012EN 1034-16:2012 (E) 4 Foreword This document (EN 1034-16:2012) has been prepared by Technical Committee CEN/TC 198 “Printing and paper m
21、achinery - Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by
22、September 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the Eu
23、ropean Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 1034 Safety of machinery Safety requirements for the design and construct
24、ion of paper making and finishing machines consists of the following parts: Part 1: Common requirements; Part 2: Barking drums; Part 3: Winders and slitters, plying machines; Part 4: Pulpers and their loading facilities; Part 5: Sheeters; Part 6: Calender; Part 7: Chests; Part 8: Refining plants; Pa
25、rt 13: Machines for de-wiring bales and units; Part 14: Reel splitter; Part 16: Paper and board making machines; Part 17: Tissue making machines; Part 21: Coating machines; Part 22: Wood grinders; Part 26: Roll packaging machines; Part 27: Roll handling systems. According to the CEN/CENELEC Internal
26、 Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour
27、g, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1034-16:2012EN 1034-16:2012 (E) 5 Introduction This document is a type C standard as stated in EN ISO 12100:2010. The machinery concerned and the extent to w
28、hich hazards, hazardous situations and events are covered are indicated in the scope of this document. For machines that have been designed and built according to the provisions of this C standard, the following stipulation applies: Where provisions of this type C standard are different from those w
29、hich are stated in type A or B standards or from provisions made in EN 1034-1:2000+A1:2010, the provisions of this type C standard take precedence over the provisions of the other standards. BS EN 1034-16:2012EN 1034-16:2012 (E) 6 1 Scope This European Standard applies to machines for the production
30、 of paper and board, including head box, wire section (former), press section, drying section, film size press, coating unit, flotation and infrared dryer, smoothing unit, integrated calender, measuring device, reel-up, integrated sheeter, drives and control system (paper and board making machines)
31、and applies together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to machines for the production of paper and board, when used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This document does n
32、ot deal with pressure hazards in steam-heated drying cylinders. NOTE Directive 97/23/EC gives essential safety requirements for equipment under pressure. This document does not apply to: tissue making machines, cardboard making machines, coating machines, machines for the production of corrugated bo
33、ard, integrated conveyors and cranes designed for transporting reels/shells (reel spools) and for machine maintenance, and integrated fire extinguishing equipment. This European Standard is not applicable to paper and board making machines which are manufactured before the date of publication of thi
34、s European Standard by CEN. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced d
35、ocument (including any amendments) applies. EN 349:1993+A1:2008, Safety of machinery Minimum gaps to avoid crushing of parts of the human body EN 547-1:1996+A1:2008, Safety of machinery Human body measurements Part 1: Principles for determining the dimensions required for openings for whole body acc
36、ess into machinery EN 614-1:2006+A1:2009, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles EN 614-2:2000+A1:2008, Safety of machinery Ergonomic design principles Part 2: Interactions between the design of machinery and work tasks EN 626-1:1994+A1:2008, Safet
37、y of machinery Reduction of risk to health from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers EN 746-1:1997+A1:2009, Industrial thermoprocessing equipment Part 1: Common safety requirements for industrial thermoprocessing equipment EN 746
38、-2:2010, Industrial thermoprocessing equipment Part 2: Safety requirements for combustion and fuel handling systems BS EN 1034-16:2012EN 1034-16:2012 (E) 7 EN 894-1:1997+A1:2008, Safety of machinery Ergonomic requirements for the design of displays and control actuators Part 1: General principles fo
39、r human interactions with displays and control actuators EN 894-2:1997+A1:2008, Safety of machinery Ergonomic requirements for the design of displays and control actuators Part 2: Displays EN 953:1997+A1:2009, Safety of machinery Guards General requirements for the design and construction of fixed a
40、nd movable guards EN 1034-1:2000+A1:2010, Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 1: Common requirements EN 1034-4:2005+A1:2009, Safety of machinery Safety requirements for the design and construction of paper making and fin
41、ishing machines Part 4: Pulpers and their loading facilities EN 1034-5:2005+A1:2009, Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 5: Sheeters EN 1034-6:2005+A1:2009, Safety of machinery Safety requirements for the design and cons
42、truction of paper making and finishing machines Part 6: Calender EN 1037:1995+A1:2008, Safety of machinery Prevention of unexpected start-up EN 1088:1996+A2:2008, Safety of machinery Interlocking devices associated with guards Principles for design and selection EN 13478:2001+A1:2008, Safety of mach
43、inery Fire prevention and protection EN 1760-1:1997+A1:2009, Safety of machinery Pressure sensitive protective devices Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors EN 1760-2:2001+A1:2009, Safety of machinery Pressure sensitive protect
44、ive devices Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars EN 1837:1999+A1:2009, Safety of machinery Integral lighting of machines EN 12198-1:2000+A1:2008, Safety of machinery Assessment and reduction of risks arising from radiation emit
45、ted by machinery Part 1: General principles EN 12453:2000, Industrial, commercial and garage doors and gates Safety in use of power operated doors Requirements EN 13023:2003+A1:2010, Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment Accuracy grad
46、es 2 and 3 EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 60204-11:2000, Safety of machinery Electrical equipment of machines Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1500 V d.c and n
47、ot exceeding 36 kV (IEC 60204-11:2000) EN 61000-6-2:2005, Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environment (IEC 61000-6-2:2005) EN 61496-1:2004, Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests (IEC 6
48、1496-1:2004, modified) EN 61511-1:2004, Functional safety Safety instrumented systems for the process industry sector Part 1: Framework, definitions, system, hardware and software requirements (IEC 61511-1:2003 + Corrigendum 2004) BS EN 1034-16:2012EN 1034-16:2012 (E) 8 EN 61511-2:2004, Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of IEC 61511-1 (IEC 61511-2:2003) EN 61800-3:2004, Adjustable speed electrical power drive systems Part 3: EMC r
