1、Water slidesPart 1: Safety requirements and test methodsBS EN 1069-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1069-1 August 2017 ICS 97.220.40 Supersedes EN 1069-1:2010English Version Water slides - Part
2、 1: Safety requirements and test methods Toboggans aquatiques - Partie 1: Exigences de scurit et mthodes dessai Wasserrutschen - Teil 1: Sicherheitstechnische Anforderungen und Prfverfahren This European Standard was approved by CEN on 14 May 2017. CEN members are bound to comply with the CEN/CENELE
3、C Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or
4、to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the offic
5、ial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
6、Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rig
7、hts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1069-1:2017 ENational forewordThis British Standard is the UK implementation of EN 1069-1:2017. It supersedes BS EN 1069-1:2010, which is withdrawn.The UK participation in its preparation was en
8、trusted to Technical Committee SW/136/8, Swimming pools and aquatic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its corre
9、ct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90571 1ICS 97.220.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strate
10、gy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 1069-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1069-1 August 2017 ICS 97.220.40 Supersedes EN 1069-1:2010English Version Water slides - Part 1: Safety requirements
11、 and test methods Toboggans aquatiques - Partie 1: Exigences de scurit et mthodes dessai Wasserrutschen - Teil 1: Sicherheitstechnische Anforderungen und Prfverfahren This European Standard was approved by CEN on 14 May 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations
12、which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This
13、 European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN membe
14、rs are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portuga
15、l, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in
16、any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1069-1:2017 EBS EN 1069-1:2017EN 1069-1:2017 (E) 2 Contents European foreword . 4 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms and definitions . 8 4 Classification 11 4.1 Type 1 . 11 4.2 Type 2 . 11 4.3 T
17、ype 3 . 11 4.4 Type 4 . 12 4.5 Type 5 . 12 4.6 Type 6 . 12 4.7 Type 7 . 12 4.8 Type 8 . 12 4.9 Type 9 . 12 4.10 Type 10 12 5 Materials and construction . 13 5.1 General . 13 5.2 Selection of materials . 13 5.3 Certificates 13 5.4 Manufacturer and installer. 13 5.5 Durability 13 5.6 Electrical instal
18、lations 13 6 Design . 14 6.1 Design guidelines . 14 6.2 Design analysis 14 6.3 Static calculations 15 7 Safety requirements for water slides 21 7.1 General . 21 7.2 Entrapment 21 7.3 Surfaces 21 7.4 Corners and edges 21 7.5 Access to water slides . 21 7.6 Start section for Types 2 to 10 . 24 7.7 Sli
19、de proper 25 7.8 Tubes and covered sections . 25 7.9 Final part . 25 7.10 Splashdown areas 27 7.11 Accessories . 27 7.12 Water supply 29 7.13 Interference between users . 30 7.14 Interference between users and non-users 30 8 Additional safety requirements for Types 1 to 10 . 31 8.1 Slide proper 31 8
20、.2 Splashdown area 35 BS EN 1069-1:2017EN 1069-1:2017 (E) 3 8.3 Clearance zones . 38 9 Check and test runs 39 9.1 General . 39 9.2 Technical and physical checks . 39 9.3 Practical test . 39 9.4 Test report 40 10 Designation and marking 41 10.1 Designation . 41 10.2 Marking 41 Annex A (normative) Spl
21、ashdown areas . 42 Annex B (normative) Use of stainless steels for water slides 47 B.1 General . 47 B.2 Indoor swimming pools with disinfection with chlorine . 47 B.3 Coatings and paintings 49 Annex C (normative) Design loads, accesses and platforms 50 C.1 Vertical imposed loads . 50 C.2 Horizontal
22、imposed loads 50 C.3 Stiffness 51 C.4 Stairs 51 D.1 Test devices 53 D.2 Description of the acceleration test method . 53 Bibliography . 54 BS EN 1069-1:2017EN 1069-1:2017 (E) 4 European foreword This document (EN 1069-1:2017) has been prepared by Technical Committee CEN/TC 136 “Sports, playground an
23、d other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2018, and conflicting national standards shall be
24、withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1069-1:2010. EN
25、1069, Water slides, consists of the following parts: Part 1: Safety requirements and test methods Part 2: Instructions In relation to EN 1069-1:2010 the following main amendments have been made: a) the document has been editorially revised; b) the definition water slide (3.3) and water level (3.13)
26、have been revised; c) requirement for water slide Type 6.2 revised; d) under 5.6 “Electrical installations” a reference to HD 60364-7-702 has been added; e) values for Table 1 “Partial factors for Ultimate Limit combinations” and Table 2 “Partial factors for serviceability combinations” have been ch
27、anged; f) new Table 3 “Partial factors for combinations of accidental actions” and Table 4 ” Combination factors 0and 2” have been added; g) Figure 5 Stepladders for water slide access deleted and requirements for access to water slides (7.5) revised; h) Figure 6 replaced by Figure 3 of EN 13451-1:2
28、011+A1:2016; i) an example for calculation has been added to 7.7.3 “Maximum acceleration on a sliding person”; j) the value for X in Figure 8 “Cross section of Type 1” has been changed; k) Table 8 “Height of fall and water depth in splashdown area for type 1 and type 2” and Table 9 “Falling distance
29、 and water depth in a splashdown area for Types 3, 4, 6, 7, 8, 9 and 10” have been revised; l) Table 8 has been replaced by a graph (see Figure 15); BS EN 1069-1:2017EN 1069-1:2017 (E) 5 m) values for water flow rate in 8.3 “Water flow” have been changed and Clause 8.3 moved to 7.12.2 Water flow rat
30、e; n) Requirements in 9.3.2 “Slide tester” have been changed; o) Figure A.1 and A.2 have been revised; p) values for type 4 in Table A.2 “Dimensions of splashdown area for Types 3 and 4” have been changed; q) values for type 6.2 in Table A.3 “Dimensions of splashdown area for Type 6” have been chang
31、ed; r) Annex D is now informative and a subclause on a maximum speed measuring device was added (D.1.3). According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croat
32、ia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turke
33、y and the United Kingdom. BS EN 1069-1:2017EN 1069-1:2017 (E) 6 Introduction The market for water slides is extremely wide and specific and still developing. It is impossible to define an all-embracing safety specification, including dimensions and design requirements as required by a standard, with
34、out limiting the design possibilities and preventing innovative and new but safe products. This European Standard is intended to establish safety requirements and design guidance rules to serve anyone involved with water slides, especially designers, manufacturers, operators and users, to ensure saf
35、e and more efficient products. Its basic approach is the consciousness that the sliding action usually implies for the users a higher risk level than using a pool. For certain aspects of design, manufacturing, installation, operation and use only specific guidelines, without any technical specificat
36、ion, are given, which should be taken into consideration and be fulfilled in order to ensure safety for operators and users. BS EN 1069-1:2017EN 1069-1:2017 (E) 7 1 Scope This European Standard is applicable to all water slides installed in swimming pools of public use. This Standard specifies gener
37、al safety requirements for water slides in swimming pools of public use and specific requirements for defined types of water slides. These specific safety requirements are also applicable to undefined types as far as possible. These requirements concern safety and the technical rules for design, cal
38、culation and testing. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documen
39、t (including any amendments) applies. EN 1069-2:2017, Water slides Part 2: Instructions EN 1990, Eurocode - Basis of structural design EN 1991-1-1, Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings EN 1991-1-3:2003, Eurocode 1 - Actio
40、ns on structures - Part 1-3: General actions - Snow loads EN 1991-1-4, Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions EN 10088-1, Stainless steels - Part 1: List of stainless steels EN 10088-2, Stainless steels - Part 2: Technical delivery conditions for sheet/plate and
41、 strip of corrosion resisting steels for general purposes EN 10204:2004, Metallic products - Types of inspection documents EN 13451-1:2011+A1:2016, Swimming pool equipment - Part 1: General safety requirements and test methods EN 13451-2, Swimming pool equipment - Part 2: Additional specific safety
42、requirements and test methods for ladders, stepladders and handle bends EN 13451-3, Swimming pool equipment Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features EN 15288-1:2008+A1:2010, Swimming pools - Part 1: Safety requ
43、irements for design EN 15288-2, Swimming pools - Part 2: Safety requirements for operation EN 22768-1, General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1) EN ISO 9606-1, Qualification testing of welders - Fusion welding - Pa
44、rt 1: Steels (ISO 9606-1) EN ISO 13857:2008, Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) BS EN 1069-1:2017EN 1069-1:2017 (E) 8 EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories
45、(ISO/IEC 17025) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 pool/swimming pool facility, with one or more water areas, intended for swimming, leisure or other water-based physical activities SOURCE: EN 15288-1:2008+A1:2010, 3.1 3.2 public
46、 use use of an installation open to everyone or to a defined group of users, not designated solely for the owners/proprietors/operators family and guests independently from paying an entrance fee SOURCE: EN 15288-1:2008+A1:2010, 3.5 Note 1 to entry: Pools serving houses rented for private use are no
47、t of public use. 3.3 water slide piece of equipment or installation with a sliding surface on which the user slides with water as a friction- and/or speed-reducing medium; the user slides freely or with the use of a ride enhancement device Note 1 to entry: On some water slides the user can also be p
48、ushed e.g. by a water stream. Note 2 to entry: For classification see Clause 4. 3.4 platform area providing access to the start section 3.5 start section area where the user enters the slide proper and takes the sliding position 3.6 slide proper area intended for sliding 3.7 final part part of the s
49、lide proper designed to prepare the user for landing, plus the subsequent parts/areas which allow landing Note 1 to entry: Subsequent parts can be splashdown area, catch unit, sofa, etc. BS EN 1069-1:2017EN 1069-1:2017 (E) 9 3.8 landing conclusion of sliding action Note 1 to entry: Types of conclusion can be fall, surf landing into water, being slowed down and stopped in a catch unit or sofa. 3.9 surf landing kind of landing which implies the action of being guided from the end of the final part, independently from its design, to intentionally su
