EN 1186-15-2002 en Materials and articles in contact with foodstuffs Plastics Part 15 Alternative test methods to migration into fatty food simulants by rapid extraction into iso-o.pdf

上传人:appealoxygen216 文档编号:705704 上传时间:2019-01-03 格式:PDF 页数:20 大小:224.18KB
下载 相关 举报
EN 1186-15-2002 en Materials and articles in contact with foodstuffs Plastics Part 15 Alternative test methods to migration into fatty food simulants by rapid extraction into iso-o.pdf_第1页
第1页 / 共20页
EN 1186-15-2002 en Materials and articles in contact with foodstuffs Plastics Part 15 Alternative test methods to migration into fatty food simulants by rapid extraction into iso-o.pdf_第2页
第2页 / 共20页
EN 1186-15-2002 en Materials and articles in contact with foodstuffs Plastics Part 15 Alternative test methods to migration into fatty food simulants by rapid extraction into iso-o.pdf_第3页
第3页 / 共20页
EN 1186-15-2002 en Materials and articles in contact with foodstuffs Plastics Part 15 Alternative test methods to migration into fatty food simulants by rapid extraction into iso-o.pdf_第4页
第4页 / 共20页
EN 1186-15-2002 en Materials and articles in contact with foodstuffs Plastics Part 15 Alternative test methods to migration into fatty food simulants by rapid extraction into iso-o.pdf_第5页
第5页 / 共20页
点击查看更多>>
资源描述

1、BRITISH STANDARD BS EN 1186-15:2002 Materials and articles in contact with foodstuffs Plastics Part 15: Alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95 % ethanol The European Standard EN 1186-15:2002 has the status of a British Standard I

2、CS 67.250 BS EN 1186-15:2002 This British Standard, having been prepared under the direction of the Consumer Products and Services Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 14 October 2002 BSI 14 October 2002 ISBN 0 580

3、40571 0 National foreword This British Standard is the official English language version of EN 1186-15:2002. The UK participation in its preparation was entrusted by Technical Committee CW/47, Materials and articles in contact with foodstuffs, to Subcommittee CW/47/1, Migration from plastics, which

4、has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the sect

5、ion entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. C

6、ompliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor rel

7、ated international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 17 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued.

8、 Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN118615 September2002 ICS67.250 Englishversion MaterialsandarticlesincontactwithfoodstuffsPlasticsPart 15:Alternativetestmethodstomigrationintofattyfood simulantsbyrapidextractionintoisooctanea

9、nd/or95% ethanol Matriauxetobjetsencontactaveclesdenres alimentairesMatireplastiquePartie15:Mthodes dessaialternativespourlamigrationdanslessimulants alimentairesgrasparextractionrapidedanslisooctane et/oulthanol95% WerkstoffeundGegenstndeinKontaktmitLebensmitteln KunststoffeTeil15:AlternativePrfver

10、fahrenzur MigrationinfettigePrflebensmitteldurchSchnellextraktion inIsoOctanund/oder95%igesEthanol ThisEuropeanStandardwasapprovedbyCENon29April2002. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardw

11、ithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityo

12、faCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Sweden,Switzerl

13、andandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2002CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN118615:2002EEN118615:2002(E) 2 Conten

14、ts page Foreword3 1 Scope 4 2 Normativereferences 5 3 MethodAAlternativetestmethodtomigrationintofattyfoodsimulantsbyrapidextraction intoisooctaneand/or95%ethanolbytotalimmersion . 5 4 MethodBAlternativetestmethodtomigrationintofattyfoodsimulantsbyrapidextraction intoisooctaneand/or95%ethanolinthesi

15、nglesidemodebycell.10 AnnexZA (informative) RelationshipofthisEuropeanStandardwithCouncilDirective89/109/EEC andCommissionDirective90/128/EECandassociatedDirectives15 Bibliography 17EN118615:2002(E) 3 Foreword ThisdocumentEN118615:2002hasbeenpreparedbyTechnicalCommitteeCEN/TC194“Utensilsincontact wi

16、thfood”,thesecretariatofwhichisheldbyBSI. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyMarch2003,andconflictingnationalstandardsshallbewithdrawnatthelatestby March2003. ThisEuropeanStandardhasbeenpreparedasoneofaseries

17、ofmethodsoftestforplasticsmaterialsandarticles incontactwithfoodstuffs. ForrelationshipwithEUDirective(s),seeinformativeannexZA,whichisanintegralpartofthisdocument. AtthetimeofpreparationandpublicationofthisstandardtheEuropeanUnionlegislationrelatingtoplastics materialsandarticlesintendedtocomeintoc

18、ontactwithfoodstuffsisincomplete.FurtherDirectivesand amendmentstoexistingDirectivesareexpectedwhichcouldchangethelegislativerequirementswhichthis standardsupports.Itisthereforestronglyrecommendedthatusersofthisstandardrefertothelatestrelevant publishedDirective(s)beforecommencementofanyofthetestort

19、estsdescribedinthisstandard. EN118615shouldbereadinconjunctionwithEN11861. Furtherpartsofthisstandardhavebeenpreparedconcernedwiththedeterminationofoverallmigrationfrom plasticsmaterialsintofoodsimulants.Theirtitlesareasfollows: EN1186MaterialsandarticlesincontactwithfoodstuffsPlastics Part1 Guideto

20、theselectionofconditionsandtestmethodsforoverallmigration Part2 Testmethodsforoverallmigrationintooliveoilbytotalimmersion Part3 Testmethodsforoverallmigrationintoaqueousfoodsimulantsbytotalimmersion Part4 Testmethodsforoverallmigrationintooliveoilbycell Part5 Testmethodsforoverallmigrationintoaqueo

21、usfoodsimulantsbycell Part6 Testmethodsforoverallmigrationintooliveoilusingapouch Part7 Testmethodsforoverallmigrationintoaqueousfoodsimulantsusingapouch Part8 Testmethodsforoverallmigrationintooliveoilbyarticlefilling Part9 Testmethodsforoverallmigrationintoaqueoussimulantsbyarticlefilling Part10 T

22、estmethodsforoverallmigrationintooliveoil(modifiedmethodforuseincaseswhere incompleteextractionofoliveoiloccurs) Part11 Testmethodsforoverallmigrationintomixturesof 14 Clabelledsynthetictriglyceride Part12 Testmethodsforoverallmigrationatlowtemperatures Part13 Testmethodforoverallmigrationathightemp

23、eratures Part14 Testmethodsforsubstitutetestsforoverallmigrationfromplasticsintendedtocomeinto contactwithfattyfoodstuffsusingtestmediaisooctaneand95%ethanol AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:

24、Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain, Sweden,SwitzerlandandtheUnitedKingdom.EN118615:2002(E) 4 1Scope ThisEuropeanStandardspecifiestwoalternativetestmethods,inthesenseofanextractiontestwithamore

25、severetestcharacter,fortheassessmentoftheoverallmigrationintofattyfoodsimulants. MethodAisbasedonthedeterminationoftheextractionofmigrateablesubstancesfromplasticswhichare intendedtocomeintocontactwithfoodstuffs,bytotalimmersioninnonpolar,isooctane,and/orpolar,ethanol, solventsdependingonthepolarity

26、ofthepackagingmaterial.Accordingtoresultsobtainedbythismethod(see 1,2,3,4,5)andtakingphysiochemicalconsiderationsintoaccount,theobtainedextractionefficiencyhas, generally,beenfoundtobeequivalenttoorhigherthanoverallmigrationresultsobtainedunderthetestconditions, 10daysat40C,2hat70C,1hat100C,30minat1

27、21Cand30minat130C. Toensureascompleteaspossibleextractionofthepotentialmigrants,astronginteraction,e.g.swelling,ofthe samplebytheextractionsolventisnecessary.Forthispurpose,isooctaneisusedasanextractionsolventfor plasticsmaterialsandarticlescontainingnonpolarfoodcontactlayers,suchaspolyolefins.Forte

28、stsamplesmade frompolarfoodcontactplasticssuchaspolyamideandpolyethyleneterephthalate,95%(v/v)aqueousethanolis used.Forpolystyrenes,plasticizedpolyvinylchlorideandotherpolymerswheretheidentificationorpolarityofthe polymerisnotclear,twoparallelextractiontestsshouldbeconductedusingbothoftheproposedext

29、raction solventsandtakingthehighervalueobtainedastherelevantresult. NOTE1 Incaseofmultilayerstructuressuchasplasticslaminatesandcoextrudedplastics,thenatureofthefoodcontact layerdeterminestheselectionoftheextractionsolvent(s). Thistestmethodshouldonlybeappliedtoflexiblepackagingswhicharelessthan300m

30、inthickness.Whenthe resultdoesnotexceedtheallowedoverallmigrationlimitthenthematerialcanbeconsideredtobeincompliance withECregulations.Ifthetestresultexceedstheallowedoverallmigrationlimitthefollowingoptionsmaybe appliedchronologicallywithrespecttofurthermigrationtesting: 1)singlesidedextractiontest

31、usingacell,iftechnicallyfeasible(seeclause4MethodBofthisstandard); 2)conventionalmigrationtestusingoliveoilorotherfattyfoodsimulants; NOTE2 TheoverallmigrationlimitisspecifiedinCommissionDirective90/128/EEC7andtheconditionsoftestinCouncil Directive82/711/EEC8anditssubsequentamendments,9,10. MethodBi

32、sapplicableinthosecaseswherethetotalimmersiontest,EN118615MethodA,yieldstotalextraction valuesthatexceedtheoverallmigrationormaybetechnicallyunsuitable,i.e.inthecaseofmultilayerstructures, suchasplasticslaminatesandcoextrudedfilms.Thistestmethodshouldprimarilyonlybeappliedtoflexible packagingswithap

33、hysicalbarrierlayer(forinstanceofaluminiumorothermaterialtopreventpenetrativelossof extractionsolvent)andwhichhaveathinnerfoodcontactlayerthan300m.Iftheresultdoesnotexceedthe allowedoverallmigrationlimitthenthematerialcanbeconsideredtobeincompliancewithECregulations.Ifthe testresultexceedstheallowed

34、overallmigrationlimitthenthefollowingoptionmaybeappliedwithrespectto furthermigrationtesting: conventionalmigrationtestusingoliveoilorotherfattyfoodsimulants. NOTE3 MethodsAandBarenotapplicabletotestmaterialsintendedforapplicationsover130C. NOTE4 Testmaterialsintendedforapplicationsover70Cshouldbech

35、eckedfortheirphysicalsuitabilityattheintended timeandtemperatureofuse.EN118615:2002(E) 5 2 Normativereferences ThisEuropeanStandardincorporatesbydatedandundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthetext,andthepublicationsarelistedhereaf

36、ter.For datedreferences,subsequentamendmentstoandrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthe publicationreferredtoapplies(includingamendments). EN11861:2002, Materialsandarticlesincontactwithfood

37、stuffsPlasticsPart1:Guidetotheselectionof conditionsandtestmethodsforoverallmigration . ISO648, LaboratoryglasswareOnemarkpipettes . ISO4788, LaboratoryglasswareGraduatedmeasuringcylinders . 3Method A Alternativetestmethodtomigrationintofattyfoodsimulantsbyrapidextractionintoiso octaneand/or95%ethan

38、olbytotalimmersion 3.1Principle Themigrateablesubstancesextractedfromasampleoftheplasticsisdeterminedasthemassofnonvolatile residueafterevaporationofthesolventfollowingimmersion.Testspecimensofatleast1dm(singleside considered)areimmersedintheextractionsolventfor24hat40Cor50Candthenremoved.Theextract

39、ion solventisevaporatedtodryness,themassofthenonvolatileresidueisdeterminedandexpressedasmilligrams persquaredecimetreofsurfaceareaofthetestspecimen.ThemeasuredvalueiscomparedtotheECofficial overallmigrationlimitandtakingtheanalyticaltoleranceofthismethod(1mg/dm)intoaccount. 3.2Reagents NOTE Fordeta

40、ilsofpreparationandqualityofthesereagents,seeclause5ofEN11861:2002. 3.2.1Ethanol 95%(v/v)inaqueoussolution. 3.2.2 Isooctane(2,2,4trimethylpentane) NOTE Theextractionsolventsgivenin3.2.1and3.2.2areselectedaccordingtothenatureofthepolymertestsampleas givenbyTable1,see3.5.1.EN118615:2002(E) 6 3.3Appara

41、tus 3.3.1Cutting slab, cleansmoothglass,metalorplasticsslabofsuitableareatopreparetestspecimens, 250mm 250mmissuitable. 3.3.2Tweezers, stainlesssteel,bluntnosed. 3.3.3 Cuttingimplement, scalpel,scissorsorsharpknifeorothersuitabledevice. 3.3.4 Metaltemplate, (100mm0,2mm) (100mm0,2mm)(square). 3.3.5 R

42、ule,graduatedinmm,andwithanaccuracyof0,1mm. 3.3.6 Analyticalbalance capableofdeterminingachangeinmassof0,1mg. 3.3.7Extraction containers; glassweighingjarswithgroundjoints,tallform,ofacapacityofapprox.60ml. 3.3.8 Thermostaticallycontrolledovenorincubator capableofmaintainingatemperaturewithintherang

43、eof +40Cto+50Candmeetingtemperaturetolerancevalueswithinthosespecifiedforthetesttemperature,see annexBofEN11861:2002. WARNING Theinterior/samplespaceoftheovenorincubatorshouldnothaveanyexposedheatingelements,tominimise safetyhazardsarisingfromanylossofflammabletestmediaduringthetestperiod. 3.3.9Dishes, ofstainlesssteel,nickel,platinum,platinumalloyorgold,50mmto90mmdiameterandof maximummass100g,foreva

展开阅读全文
相关资源
猜你喜欢
  • AECMA PREN 3886-2001 Aerospace Series Heat Resisting Alloy NI-WH1303 Filler Metal for Welding Edition P 2 Supersedes Edition P 1 January 1995 Replaced by EN 3886《航空航天系列抗热铝合金 NI-WH1.pdf AECMA PREN 3886-2001 Aerospace Series Heat Resisting Alloy NI-WH1303 Filler Metal for Welding Edition P 2 Supersedes Edition P 1 January 1995 Replaced by EN 3886《航空航天系列抗热铝合金 NI-WH1.pdf
  • AECMA PREN 3887-2001 Aerospace Series Heat Resisting Alloy CO-WH4101 Filler Metal for Welding Edition P 2 Supersedes Edition P 1 January 1995 [Replaced By CEN EN 3887]《航空航天系列抗热铝合金 .pdf AECMA PREN 3887-2001 Aerospace Series Heat Resisting Alloy CO-WH4101 Filler Metal for Welding Edition P 2 Supersedes Edition P 1 January 1995 [Replaced By CEN EN 3887]《航空航天系列抗热铝合金 .pdf
  • AECMA PREN 3888-2001 Aerospace Series Heat Resisting Alloy CO-WH1402 Filler Metal for Welding Edition P 2 Supersedes Edition P 1 January 1995 [Replaced By CEN EN 3888]《航空航天系列抗热铝合金 .pdf AECMA PREN 3888-2001 Aerospace Series Heat Resisting Alloy CO-WH1402 Filler Metal for Welding Edition P 2 Supersedes Edition P 1 January 1995 [Replaced By CEN EN 3888]《航空航天系列抗热铝合金 .pdf
  • AECMA PREN 3889-1995 Aerospace Series Steel FE-WM3801 Filler Metal for Welding Edition P1《航空航天系列FE-WM3801填充钢焊接.P1版》.pdf AECMA PREN 3889-1995 Aerospace Series Steel FE-WM3801 Filler Metal for Welding Edition P1《航空航天系列FE-WM3801填充钢焊接.P1版》.pdf
  • AECMA PREN 3890-1995 Aerospace Series Steel FE-WM1502 Filler Metal for Welding Edition P1《航空航天系列FE-WM1502填充钢焊接.P1版》.pdf AECMA PREN 3890-1995 Aerospace Series Steel FE-WM1502 Filler Metal for Welding Edition P1《航空航天系列FE-WM1502填充钢焊接.P1版》.pdf
  • AECMA PREN 3892-2001 Aerospace Series Titanium Alloy TI-W64001 Filler Metal for Welding Edition P 2 Supersedes Edition P 1 January 1995 [Replaced By CEN EN 3892]《航空航天系列TI-W64001钛合金.pdf AECMA PREN 3892-2001 Aerospace Series Titanium Alloy TI-W64001 Filler Metal for Welding Edition P 2 Supersedes Edition P 1 January 1995 [Replaced By CEN EN 3892]《航空航天系列TI-W64001钛合金.pdf
  • AECMA PREN 3893-1995 Aerospace Series Titanium Alloy TI-W19001 Filler Metal for Welding Edition P1《航空航天系列.TI-W19001钛合金填充金属丝焊接 P.第1版》.pdf AECMA PREN 3893-1995 Aerospace Series Titanium Alloy TI-W19001 Filler Metal for Welding Edition P1《航空航天系列.TI-W19001钛合金填充金属丝焊接 P.第1版》.pdf
  • AECMA PREN 3894-2001 Aerospace Series Heat Resisting Alloy NI-WD3201 Filler Metal for Welding Edition P 2《航空航天系列耐热合金 NI-WD3201 填充焊接P 2版》.pdf AECMA PREN 3894-2001 Aerospace Series Heat Resisting Alloy NI-WD3201 Filler Metal for Welding Edition P 2《航空航天系列耐热合金 NI-WD3201 填充焊接P 2版》.pdf
  • AECMA PREN 3895-2001 Aerospace Series Heat Resisting Alloy NI-WH3901 Filler Metal for Welding Edition P 2《航空航天系列耐热合金 NI-WD3201 填充焊接P 2版》.pdf AECMA PREN 3895-2001 Aerospace Series Heat Resisting Alloy NI-WH3901 Filler Metal for Welding Edition P 2《航空航天系列耐热合金 NI-WD3201 填充焊接P 2版》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1