1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 12697-6:2012Bituminous mixtures Testmethods for hot mix asphaltPart 6: Determination of bulk density ofbituminous specimensBS EN 12697-6:2012 BRITISH STANDARDNational forew
2、ordThis British Standard is the UK implementation of EN 12697-6:2012. It supersedes BS EN 12697-6:2003 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/510/1, Asphalt products.A list of organizations represented on this committee can be obtained on re
3、quest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012. Published by BSI Standards Limited 2012ISBN 978 0 580 75912 3 ICS 93.080.20 Compliance with a Bri
4、tish Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2012.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 12697-6:2012EUROPEAN STANDARD NORME EUROPENNE EUROPIS
5、CHE NORM EN 12697-6 April 2012 ICS 93.080.20 Supersedes EN 12697-6:2003+A1:2007English Version Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens Mlanges bitumineux - Mthodes dessai pour mlange hydrocarbon chaud - Partie 6: Dtermina
6、tion de la masse volumique apparente des prouvettes bitumineusesAsphalt - Prfverfahren fr Heiasphalt - Teil 6: Bestimmung der Raumdichte von Asphalt-Probekrpern This European Standard was approved by CEN on 9 March 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
7、 stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Euro
8、pean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members ar
9、e the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swede
10、n, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Me
11、mbers. Ref. No. EN 12697-6:2012: EBS EN 12697-6:2012EN 12697-6:2012 (E) 2 Contents Page Foreword 31 Scope 72 Normative references 73 Terms and definitions .74 Principle 75 Materials .85.1 General 85.2 Additional materials for the sealed specimen procedure .86 Apparatus .86.1 General 86.2 Additional
12、apparatus for the dry, SSD and sealed specimen procedures.86.3 Additional apparatus for the SSD-procedure .86.4 Additional apparatus for the dimensions procedure .87 Sample sizes and sample handling .98 Preparation of sample .99 Procedure .99.1 General 99.2 Procedure A: Bulk density dry.99.3 Procedu
13、re B: Bulk Density Saturated surface dry (SSD) 99.4 Procedure C: Bulk Density Sealed specimen . 109.5 Procedure D: Bulk density by dimensions 1010 Calculation . 1010.1 Procedure A: Bulk density dry 1010.2 Procedure B: Bulk density SSD 1110.3 Procedure C: Bulk density Sealed specimen 1110.4 Procedure
14、 D: Bulk density by dimensions 1210.4.1 Cylindrical specimen 1210.4.2 Rectangular specimen . 1211 Precision 1211.1 General . 1211.2 Repeatability (same observer same apparatus) . 1311.3 Reproducibility (different observers different apparatus) . 1312 Test report . 13Annex A (informative) General gui
15、dance on selection of a test procedure to determine the bulk density of compacted bituminous materials . 14A.1 General . 14A.2 Background (see Figure A.1) . 14A.3 Guidance 15Bibliography . 17BS EN 12697-6:2012EN 12697-6:2012 (E) 3 Foreword This document (EN 12697-6:2012) has been prepared by Technic
16、al Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdra
17、wn at the latest by October 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12697-6:2003+A1:2007. Th
18、e significant changes from that document are: The density of water at test temperature is now obtained from a formula instead of a table; All densities are now expressed in megagram per cubic metre (Mg/m3) instead of in kilogram per cubic metre (kg/m3); The requirement for the thermometer used in dr
19、y, SSD or sealed specimen procedures has been changed; The requirement on the drying of specimens has been changed; The definition of constant mass has been changed; In procedure B, the order of carrying out steps a) to g), when testing damp specimens, has been corrected; In procedure B, the Note co
20、ncerning the saturation period of specimens has been changed and is now limited to a maximum; In procedure A, B and C, the specific requirement for the accuracy of the density of water when calculating the bulk density of specimens has been deleted, with the general rule defined in Clause 5 “Materia
21、ls” being applicable; In procedure C, the formula used to calculate “bulk density dry sealed specimen” has been corrected; In procedure D, the formula used to calculate “bulk density by dimensions” both of cylindrical and rectangular specimens has been changed in order to be consistent with new dens
22、ity units; In the test report, a new paragraph with reference to dimensions of specimens has been added; In Annex A, a paragraph regarding specific requirements for particular method to be used for CE marking has been added. This European Standard is one of a series of standards as listed below: EN
23、12697-1, Bituminous mixtures Test methods for hot mix asphalt Part 1: Soluble binder content EN 12697-2, Bituminous mixtures Test method for hot mix asphalt Part 2: Determination of particle size distribution BS EN 12697-6:2012EN 12697-6:2012 (E) 4 EN 12697-3, Bituminous mixtures Test methods for ho
24、t mix asphalt Part 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous mixtures Test methods for hot mix asphalt Part 4: Bitumen recovery: Fractionating column EN 12697-5, Bituminous mixtures Test methods for hot mix asphalt Part 5: Determination of the maximum density EN 12697-6, Bitumino
25、us mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specimens EN 12697-7, Bituminous mixtures Test methods for hot mix asphalt Part 7: Determination of bulk density of bituminous specimens by gamma rays EN 12697-8, Bituminous mixtures Test methods for hot
26、 mix asphalt Part 8: Determination of void characteristics of bituminous specimens EN 12697-10, Bituminous mixtures Test methods for hot mix asphalt Part 10: Compactability EN 12697-11, Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affinity between aggregate and
27、bitumen EN 12697-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-14, Bituminous mixtures Test methods for hot m
28、ix asphalt Part 14: Water content EN 12697-15, Bituminous mixtures Test methods for hot mix asphalt Part 15: Determination of the segregation sensitivity EN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abrasion by studded tyres EN 12697-17, Bituminous mixtures Test methods
29、 for hot mix asphalt Part 17: Particle loss of porous asphalt specimen EN 12697-18, Bituminous mixtures Test methods for hot mix asphalt Part 18: Binder drainage EN 12697-19, Bituminous mixtures Test methods for hot mix asphalt Part 19: Permeability of specimen EN 12697-20, Bituminous mixtures Test
30、methods for hot mix asphalt Part 20: Indentation using cube or cylindrical specimens (CY) EN 12697-21, Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens EN 12697-22, Bituminous mixtures Test methods for hot mix asphalt Part 22: Wheel tracking EN 12697-23
31、, Bituminous mixtures Test methods for hot mix asphalt Part 23: Determination of the indirect tensile strength of bituminous specimens EN 12697-24, Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue BS EN 12697-6:2012EN 12697-6:2012 (E) 5 EN 12697-25, Bituminous mixt
32、ures Test methods for hot mix asphalt Part 25: Cyclic compression test EN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: Sampling EN 12697-28, Bituminous mixtures Test methods for hot mix as
33、phalt Part 28: Preparation of samples for determining binder content, water content and grading EN 12697-29, Bituminous mixtures Test methods for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen EN 12697-30, Bituminous mixtures Test methods for hot mix asphalt Part 3
34、0: Specimen preparation by impact compactor EN 12697-31, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor EN 12697-32, Bituminous mixtures Test methods for hot mix asphalt Part 32: Laboratory compaction of bituminous mixtures by a vibratory com
35、pactor EN 12697-33, Bituminous mixtures Test methods for hot mix asphalt Part 33: Specimen prepared by roller compactor EN 12697-34, Bituminous mixtures Test methods for hot mix asphalt Part 34: Marshall test EN 12697-35, Bituminous mixtures Test methods for hot mix asphalt Part 35: Laboratory mixin
36、g EN 12697-36, Bituminous mixtures Test methods for hot mix asphalt Part 36: Determination of the thickness of a bituminous pavement EN 12697-37, Bituminous mixtures Test methods for hot mix asphalt Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA EN 12697-38, Bitum
37、inous mixtures Test methods for hot mix asphalt Part 38: Common equipment and calibration EN 12697-39, Bituminous mixtures Test methods for hot mix asphalt Part 39: Binder content by ignition EN 12697-40, Bituminous mixtures Test methods for hot mix asphalt Part 40: In situ drainability EN 12697-41,
38、 Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids EN 12697-42, Bituminous mixtures Test methods for hot mix asphalt Part 42: Amount of coarse foreign matter in reclaimed asphalt EN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Part 43: Resi
39、stance to fuel EN 12697-44, Bituminous mixtures Test methods for hot mix asphalt Part 44: Crack propagation by semi-circular bending test FprEN 12697-45, Bituminous mixtures Test methods for hot mix asphalt Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test BS EN 12697-6:2012EN 12
40、697-6:2012 (E) 6 FprEN 12697-46, Bituminous mixtures Test methods for hot mix asphalt Part 46: Low temperature cracking and properties by uniaxial tension tests EN 12697-47, Bituminous mixtures Test methods for hot mix asphalt Part 47: Determination of the ash content of natural asphalts prEN 12697-
41、49, Bituminous mixtures Test methods for hot mix asphalt Part 49: Determination of friction after polishing. The applicability of this European Standard is described in the product standards for bituminous mixtures. According to the CEN/CENELEC Internal Regulations, the national standards organizati
42、ons of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal
43、, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12697-6:2012EN 12697-6:2012 (E) 7 1 Scope This European Standard describes test methods for determining the bulk density of a compacted bituminous specimen. The test methods are intended for use with labo
44、ratory compacted specimens or specimens from the pavement after placement and compacting, either by coring or sawing. This European Standard describes the following four procedures, the choice of which is used being dependent on the estimated content and accessibility of voids in the specimen: a) bu
45、lk density dry (for specimens with a very closed surface); b) bulk density saturated surface dry (SSD) (for specimens with a closed surface); c) bulk density sealed specimen (for specimens with an open or coarse surface); d) bulk density by dimensions (for specimens with a regular surface and with g
46、eometric shapes, i.e. squares, rectangles, cylinders, etc.). NOTE Annex A (informative) gives general guidance on selecting the appropriate procedure. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applic
47、ation. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12697-29:2002, Bituminous mixtures Test methods for hot mix asphalt Part 29: Determination of the dimensions of a bituminous speci
48、men EN 13108-20, Bituminous mixtures Material specifications Part 20: Type Testing 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 bulk density mass per unit volume, including the air voids, of a specimen at known test temperature 3.2 maximum density mass per unit volume, without air voids, of a bituminous mixture at known test temperature 4 Principle The bulk density of an intact compacted bituminou
