1、BSI Standards PublicationBS EN 1300:2013Secure storage units Classification for high securitylocks according to theirresistance to unauthorizedopeningBS EN 1300:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1300:2013. Itsupersedes BS EN 1300:2004+A1:2011
2、which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee GW/2, Secure storage of cash, valuables and data media.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the
3、necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 76366 3ICS 13.310Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was
4、 published under the authority of theStandards Policy and Strategy Committee on 30 November 2013.Amendments issued since publicationDate Text affectedBS EN 1300:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1300 November 2013 ICS 13.310 Supersedes EN 1300:2004+A1:2011English Version Secur
5、e storage units - Classification for high security locks according to their resistance to unauthorized opening Units de stockage en lieux srs - Classification des serrures haute scurit en fonction de leur rsistance leffraction Wertbehltnisse - Klassifizierung von Hochsicherheitsschlssern nach ihrem
6、Widerstandswert gegen unbefugtes ffnen This European Standard was approved by CEN on 14 May 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to
7、-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translat
8、ion under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland,
9、Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION CO
10、MIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1300:2013 EBS EN 1300:2013EN 1300:2013 (E) 2 Contents
11、 Page Foreword 3 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 Classification . 11 5 Requirements 11 6 Technical documentation 20 7 Test specimens . 21 8 Test methods . 22 9 Test report . 31 10 Marking 32 Annex A (normative) Parameters for installation and operating instructions .
12、33 Annex B (normative) Determination of manipulation resistance due to the design requirement . 35 Annex C (normative) Manufacturers Declaration (applies only to key operated locks) 42 Annex D (informative) Lock dimensions 43 Annex E (informative) A-deviations 44 Bibliography . 46 BS EN 1300:2013EN
13、1300:2013 (E) 3 Foreword This document (EN 1300:2013) has been prepared by Technical Committee CEN/TC 263 “Secure storage of cash, valuables and data media”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an
14、identical text or by endorsement, at the latest by May 2014, and conflicting national standards shall be withdrawn at the latest by May 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held res
15、ponsible for identifying any or all such patent rights. This document supersedes EN 1300:2004+A1:2011. In comparison with EN 1300:2004+A1:2011, the following changes have been made: addition of definitions (Clause 3) and requirements (subclause 5.1.6) for contactless electronic tokens; addition of d
16、efinitions (Clause 3) and requirements (subclause 5.1.7) for cryptography in distributed security systems; updating references to newer versions; changing of the requirements for the input unit (subclause 5.1.5.4); updating the test specimen of keys to a middle key cut design (subclause 7.3); clarif
17、ication and optimization of the immersion test (subclause 8.2.6.3); correction of the heat resistance test (subclause 8.2.7.2); editorial clarifications among others in subclauses 5.1.5.1, 5.2.7, 5.3.3, 7.1, 8.2.2.1, 8.2.4.3.2, 8.2.6.2 and 8.3.3.3.2; addition of parameters for operating instructions
18、 in Annex A. This document reflects the market demand to include requirements for distributed systems and electronic tokens and responds to the state of the art requirements when it was written down. This European Standard has been prepared by Working Group 3 of CEN/TC 263 as one of a series of stan
19、dards for secure storage of cash valuables and data media. Other standards in the series are, among others: EN 1047-1, Secure storage units Classification and methods of test for resistance to fire Part 1: Data cabinets and diskette inserts EN 1047-2, Secure storage units Classification and methods
20、of test for resistance to fire Part 2: Data rooms and data container EN 1143-1, Secure storage units Requirements, classification and methods of test for resistance to burglary Part 1: Safes, ATM safes, strongroom doors and strongrooms BS EN 1300:2013EN 1300:2013 (E) 4 EN 1143-2, Secure storage unit
21、s Requirements, classification and methods of test for resistance to burglary Part 2: Deposit systems EN 14450, Secure storage units Requirements, classification and methods of test for resistance to burglary Secure safe cabinets According to the CEN-CENELEC Internal Regulations, the national standa
22、rds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux
23、embourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1300:2013EN 1300:2013 (E) 5 Introduction This European Standard also specifies requirements for high security electronic locks (HSL) which are controll
24、ed remotely. Regarding distributed systems, this standard responds to the state of the art requirements when it was written down. It is mandatory that the standard has to be revised with a frequency of 3 years as the research in the area of cryptography and relevant attacks evolve with high speed as
25、 well as the referenced standards. BS EN 1300:2013EN 1300:2013 (E) 6 1 Scope This European Standard specifies requirements for high security locks (HSL) for reliability, resistance to burglary and unauthorized opening with methods of testing. It also provides a scheme for classifying HSL in accordan
26、ce with their assessed resistance to burglary and unauthorized opening. It applies to mechanical and electronic HSL. The following features may be included as optional subjects but they are not mandatory: a) recognized code for preventing code altering and/or enabling/disabling parallel codes; b) re
27、cognized code for disabling time set up; c) integration of alarm components or functions; d) remote control duties; e) resistance to attacks with acids; f) resistance to X-rays; g) resistance to explosives; h) time functions. 2 Normative references The following documents, in whole or in part, are n
28、ormatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1143-1, Secure storage units Requirements, classificati
29、on and methods of test for resistance to burglary Part 1: Safes, ATM safes, strongroom doors and strongrooms EN 60068-2-1:2007, Environmental testing Part 2-1: Tests Test A: Cold (IEC 60068-2-1:2007) EN 60068-2-2:2007, Environmental testing Part 2-2: Tests Test B: Dry heat (IEC 60068-2-2:2007) EN 60
30、068-2-6:2008, Environmental testing Part 2-6: Tests Test Fc: Vibration (sinusoidal) (IEC 60068-2-6:2007) EN 60068-2-17:1994, Environmental testing Part 2: Tests Test Q: Sealing (IEC 60068-2-17:1994) EN 61000-4-2, Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques Electr
31、ostatic discharge immunity test (IEC 61000-4-2) EN 61000-4-3, Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3) EN 61000-4-4, Electromagnetic compatibility (EMC) Part 4-4: Testing and measur
32、ement techniques Electrical fast transient/burst immunity test (IEC 61000-4-4) EN 61000-4-5, Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test (IEC 61000-4-5) BS EN 1300:2013EN 1300:2013 (E) 7 EN 61000-4-6, Electromagnetic compatibility (EMC) Part 4
33、-6: Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields (IEC 61000-4-6) EN ISO 6988, Metallic and other non-organic coatings Sulfur dioxide test with general condensation of moisture (ISO 6988) ISO/IEC 9798-1:2010, Information technology Security
34、techniques Entity authentication Part 1: General ISO/IEC 9798-2, Information technology Security techniques Entity authentication Part 2: Mechanisms using symmetric encipherment algorithms ISO/IEC 9798-4, Information technology Security techniques Entity authentication Part 4: Mechanisms using a cry
35、ptographic check function 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 High Security Lock HSL independent assembly normally fitted to doors of secure storage units Note 1 to entry: Codes can be entered into an HSL for comparison with memor
36、ized codes (processing unit). A correct match of an opening code allows movement of a blocking feature. 3.2 code identification information required which can be entered into a HSL and which, if correct, enables the security status of the HSL to be changed 3.2.1 opening code identification informati
37、on which allows the HSL to be opened 3.2.2 recognized code identification information which allows access to the processing unit and which may also be an opening code 3.2.3 duress code parallel code which initiates some additional function 3.2.4 parallel code opening code which has identical functio
38、n to that of an existing opening code but constructed of different figures 3.3 coding means method by which the code is held 3.3.1 material code code defined by the physical features or other properties of a token BS EN 1300:2013EN 1300:2013 (E) 8 3.3.2 mnemonic code remembered code consisting of nu
39、meric and/or alphabetic information 3.3.3 biometric code code comprising human characteristics 3.3.4 one time code code changing after each use generated by use of an algorithm 3.4 input unit part of an HSL which communicates codes to a processing unit 3.5 processing unit part of an HSL which evalua
40、tes whether the input code is correct and enables or prevents movement of a locking device 3.6 locking device bolt stump or bolt stumps which form part of an HSL which enables or prevents movement of a blocking feature 3.7 token object whose physical form or properties defines a recognized code, e.g
41、. a key Note 1 to entry: An electronic token incorporates an integrated circuit containing volatile and non-volatile memory, associated software and in many cases a microcontroller which communicates with an input unit by contact or contactless means. 3.8 mechanical HSL HSL which is secured by means
42、 of mechanical elements only 3.9 electronic HSL HSL which is secured partly or fully by electrical or electronic elements 3.10 blocking feature part of a HSL which, after inputting the correct opening code moves, or can be moved Note 1 to entry: A blocking feature either secures a door or prevents m
43、ovement of a boltwork. The bolt of a mechanical lock is an example of a blocking feature. 3.11 destructive burglary attack which damages the HSL in such a manner that it is irreversible and cannot be hidden from the authorized user 3.12 reliability ability to function and achieve the security requir
44、ements of this standard after a large number of duty cycles BS EN 1300:2013EN 1300:2013 (E) 9 3.13 manipulation method of attack aimed at removing the blocking function without causing damage obvious to the user Note 1 to entry: A HSL may function after manipulation although its security could be pe
45、rmanently degraded. 3.14 spying attempt to obtain unauthorized information 3.15 usable codes codes or tokens permitted by the manufacturer and conforming to the requirements of this standard Note 1 to entry: For mechanical HSL the number of usable codes is much less than the total number of codes to
46、 which the HSL can be set. 3.16 scrambled condition coding elements are not in the configuration necessary for the HSL to be opened without entering the complete correct code or proper token 3.17 locking sequence series of actions which start with an open door and are complete when the door is close
47、d, bolted, locked and secure 3.18 open door door is not in its frame 3.19 closed door door is within its frame ready for throwing its bolt(s) 3.20 bolted door bolts are thrown 3.21 locked door boltwork cannot be withdrawn because of the HSL 3.22 secured door door is closed, bolted and locked with an
48、 HSL in the secured HSL condition 3.23 secured HSL condition blocking feature is thrown and can only be withdrawn after entering the opening code(s) 3.24 normal condition after testing, the HSL specimen is in the secured HSL condition, and all design functions are operating 3.25 operating condition
49、after testing, the HSL specimen is in the secured HSL condition and can be unlocked with the opening code(s), but not all design functions are operable BS EN 1300:2013EN 1300:2013 (E) 10 3.26 fail secure after testing, the HSL specimen is in the secured HSL condition, but not all design functions are operable therefore it cannot be unlocked with the opening code(s) 3.27 resistance unit RU value for burglary and manipulation resistance Note 1 to entry: It shows a
