1、BSI Standards PublicationBS EN 13022-2:2014Glass in building Structuralsealant glazingPart 2: Assembly rulesBS EN 13022-2:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13022-2:2014.It supersedes BS EN 13022-2:2006+A1:2010 which is withdrawn.The UK partici
2、pation in its preparation was entrusted to TechnicalCommittee B/520/4, Properties and glazing methods.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are res
3、ponsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 82679 5ICS 81.040.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandard
4、s Policy and Strategy Committee on 30 June 2014.Amendments issued since publicationDate Text affectedBS EN 13022-2:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13022-2 June 2014 ICS 81.040.20 Supersedes EN 13022-2:2006+A1:2010English Version Glass in building - Structural sealant glazing
5、 - Part 2: Assembly rules Verre dans la construction - Systme de vitrage extrieur coll (VEC) - Partie 2: Rgles dassemblage Glas im Bauwesen - Geklebte Verglasungen - Teil 2: Verglasungsvorschriften fr Structural-Sealant-Glazing (SSG-) Glaskonstruktionen This European Standard was approved by CEN on
6、9 February 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may
7、 be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified t
8、o the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,
9、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Managemen
10、t Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13022-2:2014 EBS EN 13022-2:2014EN 13022-2:2014 (E) 2 Contents Page Foreword . 4 1 Scope 5 2 Normative references 5 3 Terms and defini
11、tions . 5 4 Requirements. 5 5 Assembling/bonding . 6 6 Assembling/bonding control 7 6.1 Assembling/bonding control requirements 7 6.1.1 General . 7 6.1.2 Organization . 7 6.1.3 Assembling quality system . 7 6.2 Inspection and testing tables for assembling glass elements into or onto framework with s
12、tructural sealant 8 Annex A (normative) Dynamic tensile and peel test on structural sealant 14 A.1 Purpose 14 A.1.1 General . 14 A.1.2 Project Test 14 A.1.3 Convenience test . 14 A.1.4 Factory production control test . 14 A.2 Test specimens 14 A.2.1 Tensile test . 14 A.2.2 Peel test 14 A.3 Condition
13、ing of test specimens . 14 A.4 Test procedure. 15 A.4.1 In the case of tensile test 15 A.4.2 In the case of peel test 15 A.5 Observation 15 A.6 Report . 15 Annex B (informative) Design guidance . 17 B.1 Characteristics. 17 B.2 Characteristic details 18 B.2.1 General . 18 B.2.2 Safety in the case of
14、fire reaction to fire 18 B.2.3 Health release of dangerous substances 19 B.2.4 Safety in use 19 B.2.5 Structural seal dimensions 19 B.3 Initial assessment of the design 26 B.4 Assembling details 27 Annex C (normative) Adhesion tests in assembling/bonding control 28 C.1 General . 28 C.2 Purpose 28 BS
15、 EN 13022-2:2014EN 13022-2:2014 (E) 3 C.3 Peel test Method 1 28 C.3.1 Test specimens 28 C.3.2 Curing time . 29 C.3.3 Test procedure . 29 C.3.4 Observation 29 C.4 Static tensile test Method 2 . 29 C.4.1 Test specimens 29 C.4.2 Curing time . 29 C.4.3 Test procedure . 30 C.4.4 Observation 30 C.5 Dynami
16、c tensile test 30 C.5.1 Test specimens 30 C.5.2 Curing time . 30 C.5.3 Test procedure . 30 C.5.4 Observation 30 C.6 Report . 30 Annex D (informative) Two-component sealant: Check on the thoroughness of mixing and air inclusions . 32 D.1 General . 32 D.2 Purpose 32 D.3 Test specimen 32 D.4 Test proce
17、dure . 32 D.5 Report . 32 Annex E (informative) Sealants, hardness measurements . 34 E.1 General . 34 E.2 Purpose 34 E.3 Definitions 34 E.3.1 Curing time . 34 E.3.2 Free surface . 34 E.4 Instruments 34 E.5 Calibration 34 E.6 Test specimens 35 E.7 Test procedure . 35 E.8 Report . 35 Annex F (informat
18、ive) Provisions for voluntary involvement of third party(ies) 37 F.1 General . 37 F.2 Voluntary tasks for third parties 37 F.3 Marking and labelling 37 Bibliography 38 BS EN 13022-2:2014EN 13022-2:2014 (E) 4 Foreword This document (EN 13022-2:2014) has been prepared by Technical Committee CEN/TC 129
19、 “Glass in building”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2014 and conflicting national standards shall be withdrawn at the latest by
20、December 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13022-2:2006+A1:2010. This document has bee
21、n prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This part of EN 13022 is one of a series of interrelated standard parts dealing with: glass products for structural sealant glazing systems; installation of glass products in a structural mann
22、er on building faades; UV-resistant and structural sealant for use in structural sealant glazing. The interrelated parts are: EN 13022-1: Glass in building Structural sealant glazing Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple g
23、lazing EN 13022-2: Glass in building Structural sealant glazing Part 2: Assembly rules EN 15434: Glass in building Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) According to the CEN-CEN
24、ELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, I
25、celand, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13022-2:2014EN 13022-2:2014 (E) 5 1 Scope This European Standard deals with the assembling and bonding of
26、 glass elements in a frame, window, door or curtain walling construction, or directly into the building by means of structural bonding of the glass element into or onto framework or directly into the building. It gives information to the assembler to enable him to organize his work and comply with r
27、equirements regarding quality control. Structural sealant glazing can be incorporated into the faades (curtain walls, doors and windows) or roofs as follows: either vertically; or up to 7 from the horizontal, i.e. 83 from the vertical. This European Standard only deals with the bonding to glass surf
28、aces, i.e. coated or uncoated or enamelled, and metallic surfaces, i.e. aluminium (anodised or coated), stainless steel, as considered in G.2 of EN 15434:2006+A1:2010. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensab
29、le for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13022-1:2014, Glass in building Structural sealant glazing Part 1: Glass products for structural sealant glazing
30、systems for supported and unsupported monolithic and multiple glazing EN 15434:2006+A1:2010, Glass in building Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) 3 Terms and definitions For
31、the purposes of this document, the terms and definitions given in EN 13022-1:2014, EN 15434:2006+A1:2010 and the following apply. 3.1 structural bonding assembling of glass elements into or onto window, door or curtain walling framework by means of a structural seal 3.2 structural sealant elastic se
32、alant used for making a structural seal 4 Requirements The assembling of the glass elements into or onto the window, door or curtain-walling framework or directly in the building or construction shall take place under the following controlled environmental conditions: temperature of the surface of t
33、he frame and of the glass and of the near environment shall be not less than 10 C and not more than 35 C; for a given temperature, the RH value shall be at least 5 % below the value corresponding to the dew point of the support to which the seal is being applied; BS EN 13022-2:2014EN 13022-2:2014 (E
34、) 6 environment in the vicinity of the assembling shall be dust free; glass elements are securely fixed until the full curing of the sealant has taken place. It shall be ensured that the work is executed as foreseen by the design, so that in particular: curing of the various seals proceeds as forese
35、en by the design; after curing, the characteristic performances including durability are deemed to satisfy the design requirements. NOTE For design guidance, refer to Annex B. 5 Assembling/bonding The assembling manual shall be used for instruction of both the assembling and control and will be a pa
36、rt of the assembling control documentation. The assembling manual shall make reference to the design of the work and detail the assembling procedures, in particular what is related to: list of characteristics claimed by the designer; component materials and products, and when appropriate trade name,
37、 generic type, marking and labelling; cleaning and preparation materials, trade name, generic type, marking and labelling; installations, equipment and tools for transport, storage, cleaning, use of primers, other preparation work of bonding surfaces, mixing sealant components, extrusion of sealant;
38、 cleaning process of the seal bonding surfaces; where applicable, process for use of primers; positioning of glass and framework before extrusion of sealant, inclusive the application of glazing blocks (see EN 13022-1), anti-adhesive film and backer rod; extrusion of sealant; waiting time to obtain
39、initial cure and transport and storage conditions just after initial cure; waiting time to obtain further curing and final installation in the work; finishing processes such as removing temporarily fixing means and application of weather seals; information concerning the compatibility of various mat
40、erials and components. The assembling manual shall also contain control and testing requirements and conditions, which may be by full description or by reference to this European Standard. The designer should specify that: sealant conforms to EN 15434 or has an ETA1)with the type of substrate used;
41、1) ETA: European Technical Agreement. BS EN 13022-2:2014EN 13022-2:2014 (E) 7 glass products conform to the relevant product standard taking into account EN 13022-1. For more details, refer to Annex A. 6 Assembling/bonding control 6.1 Assembling/bonding control requirements 6.1.1 General An assemble
42、r operating under a (when required third party surveillance) Quality Assurance System according to EN ISO 9001:2008, in which the quality procedures refer to 6.2 of this European Standard, has the benefit of presumption to comply with this European Standard. If not, the following sub-clauses shall b
43、e applied. 6.1.2 Organization 6.1.2.1 Responsibility and authority The responsibility, authority and the interrelation of all personnel who manage, perform and verify work-affecting conformity shall be defined, particularly for personnel who need the organisational freedom and authority to: a) initi
44、ate action to prevent the occurrence of non-conformity assembling; b) identify and record any assembling conformity problems. 6.1.2.2 Management representative for assembling control The manufacturer shall appoint a management representative who, irrespective of other responsibilities, shall have de
45、fined authority and responsibility for ensuring that the requirements of this European Standard are implemented and maintained. 6.1.2.3 Management review The assembling control system shall be reviewed at appropriate intervals by the manufacturers management to ensure its continuing suitability and
46、effectiveness. Records of such reviews shall be maintained. 6.1.3 Assembling quality system 6.1.3.1 General The manufacturer shall establish and maintain a documented system as a means of ensuring that the assembling conforms to this European Standard. The following requirements hereafter shall be f
47、ulfilled. 6.1.3.2 Personnel The manufacturer shall appoint personnel for the inspections and assembling control tests that will be carried out before (e.g. incoming materials), during and after assembling. 6.1.3.3 Documentation The manufacturers documentation and procedures shall be relevant to the
48、assembling and assembling control, and shall adequately describe in a manual: a) aims and organizational structure, responsibilities and authorities of the management with regard to assembling/bonding conformity; BS EN 13022-2:2014EN 13022-2:2014 (E) 8 b) procedures for specifying and verifying the
49、incoming materials (see also the assembling manual); c) manufacturing (see the assembling manual), production control and other techniques, processes and systematic actions that will be used; d) inspections that will be carried out before production, the inspection tests during and after production, and the frequency of which they will be carried out. 6.1.3.4 Test equipment Calibration of test equipment necessary for assembling control shall be documented. 6.1.3.5 Inspection and testi
