1、BRITISH STANDARDBS EN 13032-1:2004Light and lighting Measurement and presentation of photometric data of lamps and luminairesPart 1: Measurement and file formatICS 17.180.20; 29.140.01g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g
2、3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A1:2012National forewordThis British Standard is the UK implementation of EN 13032-1:2004+A1:2012, including Corrigendum January 2005. It supersedes BS EN 13032-1:2004 which is withdrawn.The start and finish of text
3、 introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee CPL/34, Lamps
4、 and related equipment, to Subcommittee CPL/34/10, Lamps and related equipment - Light and lighting.A list of organizations represented on this subcommittees can be obtained on request to their secretaries.Please note BS EN 13032-1:2004 superseded BS 354:1995, and was also used in conjunction with B
5、S 7920:2005 and BS 667:2005.Recommendations for construction and use of integrating photometers and goniophotometers, which were given in BS 354:1995 and which are not within the scope of EN 13032-1 are given in National annex NA.BS EN 13032-1 specifies laboratory luminance meters and illuminance me
6、ters for testing luminaires only. It does not cover luminance meters and illuminance meters for other laboratory purposes or for field use, which are covered in BS 7920:2005 and BS 667:2005, respectively.This publication does not purport to include all the necessary provisions of a contract. Users a
7、re responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 13032-1:2004+A1:2012This British Standard, havingbeen prepared under thedirection of the ConsumerProducts and Services SectorPolicy and Strategy Committee,was published u
8、nder theauthority of the StandardsPolicy and Strategy Committeeon 10 July 2002 The British Standards Institution 2012. Published by BSI Standards Limited 2012.Amendments/corrigenda issued since publicationDate Comments 30 April 2012 Implementation of CEN amendment A1:2012ISBN 978 0 580 74949 0EUROPE
9、AN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13032-1:2004+A1 March 2012 ICS 17.180.20 Supersedes EN 13032-1:2004English Version Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format Lumire et clairage - Mesure et prsenta
10、tion des donnes photomtriques des lampes et des luminaires - Partie 1: Mesurage et format de donnes Licht und Beleuchtung - Messung und Darstellung photometrischer Daten von Lampen und Leuchten - Teil 1: Messung und Datenformat This European Standard was approved by CEN on 16 January 2004 and includ
11、es Corrigendum 1 issued by CEN on 26 January 2005 and Amendment 1 approved by CEN on 15 January 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. U
12、p-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tran
13、slation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finla
14、nd, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPI
15、SCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13032-1:2004+A1:2012: EEN 13032-1:2004+A1:2012 (E) 2 Contents page Foreword 4Introduction . 51 Scope
16、 62 Normative references 63 Terms and definitions . 64 Co-ordinate system . 74.1 General 74.2 System of measuring planes 84.2.1 General 84.2.2 B-planes 84.2.3 C-planes 104.2.4 Relationships between the plane systems . 125 Laboratory requirements for tests . 135.1 General 135.2 Test conditions 135.2.
17、1 Test room 135.2.2 Test voltage 135.2.3 Ambient temperature . 135.2.4 Air movement . 155.2.5 Stabilisation of the light source . 155.3 Electrical power supply . 155.3.1 Current handling capacity 155.3.2 Stability of supply voltage 155.3.3 AC frequency . 155.3.4 AC waveform 155.3.5 DC ripple . 155.3
18、.6 Electro-magnetic field . 165.4 Luminous intensity distribution measurements 165.5 Luminous flux measurements 165.6 Luminance measurements . 165.7 Photometric factors . 175.8 Luminaires for test 176 Requirements for measurement 206.1 General aspects . 206.1.1 Goniophotometers . 216.1.2 Integrating
19、 photometers . 226.1.3 Illuminance meters 246.1.4 Luminance meters . 266.2 Measurement uncertainties 277 Basic data format requirements . 288 Electronic transfer of luminaire data . 288.1 General 288.2 File format. 28Annex A (informative) Screening against stray light 29Annex B (normative) Propertie
20、s of photometers 30B.2.1 Definition 30B.2.2 Measurement 31BS EN 13032-1:2004+A1:2012EN 13032-1:2004+A1:2012 (E) 3 B.2.3 Characterization . 31B.3.1 Definition 32B.3.2 Measurement 32B.3.3 Characterization . 32B.4.1 Directional response for the measurement of illuminance . 33B.4.2 Directional response
21、for the measurement of luminance . 35B.5.1 Description . 38B.5.2 Measurement 38B.5.3 Characterization . 39B.6.1 Description . 39B.6.2 Measurement 39B.6.3 Characterization . 40B.7.1 Description . 40B.7.2 Measurement 40B.7.3 Characterization . 40B.8.1 Definition 40B.8.2 Measurement 41B.8.3 Characteriz
22、ation . 41B.10.1 Definition 42B.10.2 Measurement 42B.10.3 Characterization . 42B.11.1 Description . 43B.11.2 Measurement 43B.11.3 Characterization . 43B.12.1 Description . 44B.12.2 Lower and upper frequency limits . 44B.13.1 Definition 45B.13.2 Measurement 45B.13.3 Characterization . 45Annex C (norm
23、ative) Testing of mirrors for variation in reflectance and flatness 46Annex D (normative) CEN File Format . 47Annex E (informative) Examples of the CEN File Format . 59Annex F (normative) !Measurement procedure for the photometry of luminaires equipped with T16 lamps or fluorescent compact lamps“ .
24、62F.2.1 Ageing . 62F.2.2 Burn-in (pre-conditionning) 62F.2.3 Hot transfer 63F.2.4 Stabilisation . 63F.2.5 Multiple use of lamps 63F.2.6 Replacement of measurement lamps 63F.2.7 Storage and transport of lamps . 63F.3.1 Electrical wiring . 64F.3.2 Measurement procedure . 64Bibliography 65BS EN 13032-1
25、:2004+A1:2012EN 13032-1:2004+A1:2012 (E) 4 Foreword This document (EN 13032-1:2004+A1:2012) has been prepared by Technical Committee CEN/TC 169 “Light and lighting“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publicatio
26、n of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. This document includes Amendment 1, approved by CEN on 2012-01-15 and Corrigendum 11, issued by CEN on 2005-01-26. This document supersede
27、s EN 13032-1:2004. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. The modifications of the related CEN Corrigendum have been implemented at the appropriate places in the text and are indicated by the tags . Acknowledgement is given to CIE for th
28、eir help in the preparation of this standard. The European Standard 13032 Light and lighting - Measurements and presentation of photometric data of lamps and luminaires is published in the following parts: Part 1: Measurement and file format. Part 2: Presentation of data for indoor and outdoor work
29、places. Part 3: Emergency lighting (in preparation). Part 4: Sports lighting (in preparation). Part 6: Tunnel lighting (in preparation). !deleted text“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-tries are bound to implement this Euro
30、pean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repub-lic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux-embourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land, T
31、urkey and United Kingdom. 1This corrigendum was relating to the extension of the DOW of EN 13032-1:2004. BS EN 13032-1:2004+A1:2012EN 13032-1:2004+A1:2012 (E) 5 Introduction The provision of reliable and accurate photometric data is a basic requirement for any lighting engineer in order to design a
32、good lighting scheme. This European Standard aims to put on a common basis current European lighting practices so that a luminaire with its associated performance data, purchased in one country, can be directly compared and accurately em-ployed in another country. The standard is a guide to procedur
33、es referring where necessary to the relevant CIE, ISO and CEN publications. The reliability of these data depends also on well defined qualifications about the management, the organisation and the metrological referability of the Laboratory and the skill of the staff. !Due to the specific handling r
34、equirements for T16 and compact fluorescent lamps, these lamps are covered separately (normative Annex F).“ BS EN 13032-1:2004+A1:2012EN 13032-1:2004+A1:2012 (E) 6 1 Scope This European Standard establishes general principles for the measurement of basic photometric data for lighting application pur
35、poses. It establishes the measurement criteria needed for the standardisation of basic photometric data and details of the CEN file format for electronic data transfer. This is part 1 of a multi part standard. Part 1 deals with the basic photometric measurement and file format. Other parts deal with
36、 lamps and luminiares data depending on the applications. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafte
37、r. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 12665:2002, L
38、ight and lighting Basic terms and criteria for specifying lighting requirements !EN 60081, Doublecapped fluorescent lamps Performance specifications (IEC 60081) EN 60901, Single-capped fluorescent lamps Performance specifications (IEC 60901)“ ISO 9660, Information processing Volume and file structur
39、e of CD-ROM for information interchange 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 12665 together with the following apply. 3.1 light source lamp or luminaire 3.2 photometric centre point in a luminaire or lamp from which the photometric
40、 distance law operates most closely in the direction of maximum intensity NOTE It is the origin of the coordinate system used for the measuring of luminous intensity distribution and should be specified. 3.3 limiting photometric distance minimum distance for deriving the luminous intensity from the
41、measured illuminance 3.4 relative measurement measurement obtained as a ratio of two quantities of the same type expressed in arbitary units. Photometric measurement in SI units relative to specified bare lamp flux CIE 121:1996, definition 2.3.2 BS EN 13032-1:2004+A1:2012EN 13032-1:2004+A1:2012 (E)
42、7 3.5 luminaire data per 1 000 lm (of lamp flux) photometric data of luminaire relative to a total theoretical luminous flux of 1 000 lm from all the lamps of the lumi-naire, when these are operated outside the luminiare under reference conditions but with the same ballast(s) 3.6 luminous intensity
43、distribution (of a luminaire) distribution of luminous intensity with direction. The luminous intensity distribution may be represented by numeri-cal tables or by graphics and is usually expressed in units of candelas per 1 000 lm of lamp flux !3.7 measurement lamp lamp used for the photometric char
44、acterisation of a luminaire 3.8 cold spot (of a fluorescent lamp) coldest point on the discharge tube that determine the Hg-pressure in the discharge tube“ 4 Co-ordinate system 4.1 General2The determination of the intensity distribution involves the use of a co-ordinate system in order to define the
45、 di-rection in which the intensity measurements are made; the system used is a spherical co-ordinate system with the centre coincident with the photometric centre of the luminaire. From a general point of view the co-ordinate system consists in a group of planes with a single axis of intersec-tion:
46、the polar axis. In this system a direction in space is characterised by two angles: a)- the angle between the plane taken as a conventional origin and the half plane containing the considered di-rection; b) - the angle between the polar axis and the considered direction or the complement of this ang
47、le. The orientation of this system with respect to the first axis and the second axis (see Figure 1) of the luminaire is chosen with particular regard to the type of luminaire, to the type of lamp, to the mounting attitude of the luminaire and its application, in order to perform more accurate measu
48、rements or to simplify the consequent lighting calcu-lations. The identification of the first axis and the second axis shall be defined by the manufacturer or the photometric laboratory according to this standard. The third axis is the axis containing the photometric centre and perpendicu-lar to the two first axes. For information on the location of the photometric centre see clause 5.8. NOTE Usually the first axis of a luminaire is perpendicular to the light emitting area of the luminaire. As the light emitting area
