1、BRITISH STANDARDBS EN 13035-3:2003Machines and plants for the manufacture, treatment and processing of flat glass Safety requirementsPart 3: Cutting machinesICS 81.100 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g
2、53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A1:2009IncorporatingcorrigendumApril 2010National forewordThis British Standard is the UK implementation of EN 13035-3:2003+A1:2009, incorporating corrigendum April 2010. It supersedes BS EN 13035-3:2003 which is withdrawn.The star
3、t and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Com
4、mittee MCE/3, Safeguarding of machinery, to Subcommittee MCE/3/13, Glass manufacturing machines safety.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users a
5、re responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 13035-3:2003+A1:2009This British Standard, was published under the authority of the Standards Policy and Strategy Committee on23 July 2003 BSI 2010Amendments/corrigenda i
6、ssued since publicationDate Comments 31 January 2010 Implementation of CEN amendment A1:200930 June 2010 Implementation of CEN corrigendum April 2010; Clause 1.2 amendedISBN 978 0 580 71484 9EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13035-3:2003+A1 August 2009 ICS 81.100 Supersedes EN 130
7、35-3:2003English Version Incorporating corrigendum April 2010Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines Machines et installations pour la production, le faonnage et la transformation du verre plat - Exigences de sc
8、urit - Partie 3: Machines dcouper Maschinen und Anlagen fr die Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 3: Schneidmaschinen This European Standard was approved by CEN on 23 May 2003 and includes Amendment 1 approved by CEN on 23 July 2009. CEN members are bou
9、nd to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the C
10、EN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same sta
11、tus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romani
12、a, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved wo
13、rldwide for CEN national Members. Ref. No. EN 13035-3:2003+A1:2009: EEN 13035-3:2003+A1:2009 (E) 2 Contents Page Foreword 30 Introduction 41 Scope 42 Normative references 43 Terms and definitions . 64 List of significant hazards 65 Safety requirements and/or protective measures 85.1 Common requireme
14、nts . 85.2 Additional special safety requirements for flat glass cutting tables where access is not intended 105.3 Additional special safety requirements for flat glass cutting tables where access is intended . 116 Verification of safety requirements and/or protective measures . 127 Information for
15、use 12Annex A (normative) Perimeter fencing 15Annex B (normative) Photo-electric guarding . 16Annex C (normative) Photo-electric guarding with barrier rail 17Annex D (normative) Fixed distance guard 18Annex E (normative) Photo-electric guarding 19Annex F (normative) Reflex photo-electric sensors (si
16、ngle light beam scanners) and push-away bars 20Annex G (normative) Stopping operation by safety measures 21Annex H (informative) Electrical interlocking of movable guards . 22Annex I (informative) Danger zones on cutting machines 23Annex J (informative) Synopsis of possible methods of safeguarding a
17、ccording to 5.2 and 5.3 24Annex K (normative) !Noise-test code . 25K.1 A-weighted emission sound pressure level determination . 25K.2 A-weighted emission sound power level determination . 25K.3 Installation and mounting conditions 25K.4 Operating conditions . 25K.5 Measurement uncertainties 26K.6 In
18、formation to be recorded . 26K.7 Information to be reported 26Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by 98/79/EC . 27Annex ZB (informative) !Relationship between this European Standard and the Essential Req
19、uirements of EU Directive 2006/42/EC . 28Bibliography 29BS EN 13035-3:2003+A1:2009“EN 13035-3:2003+A1:2009 (E) 3 Foreword This document (EN 13035-3:2003+A1:2009) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety“, the secretariat of whi
20、ch is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2010, and conflicting national standards shall be withdrawn at the latest by February 2010. Attention is drawn to the po
21、ssibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-07-23. This document supersedes EN 13035-3:2003. The s
22、tart and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EC Directive(s). !For relationship wi
23、th EU Directives, see informative Annexes ZA and ZB, which are integral parts of this document.“ !Annexes A to G and K are normative. Annexes H, I and J are informative.“ This document is one of a series concerning machinery for the treatment and processing of flat glass. This document includes a Bi
24、bliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irel
25、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13035-3:2003+A1:2009EN 13035-3:2003+A1:2009 (E) 4 0 Introduction This document is a type-C standard as stated in !EN ISO 12100-1“
26、. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type-C standard are different from those which are stated in type-A or -B standards, the provisions of this type-C standard take
27、 precedence over the provisions of the other standards for machines that have been designed and built according to the provisions of this type-C standard. 1 Scope 1.1 This standard contains the requirements for safety for the design and installation of machines with one movable bridge for cutting of
28、 flat glass, which operate by scoring of the glass placed on a horizontal support. This standard covers the transport of the glass on the machine. 1.2 !This European Standard deals with all significant hazards, hazardous situations and events relevant to flat glass cutting machines, when they are us
29、ed as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance.“1.3 Thi
30、s standard does not apply to flat glass cutting by abrasive cutting or by the use of high pressure liquid or lasers. 1.4 This standard does not apply to loading and unloading of flat glass on to or from cutting machines and the breaking out (see !EN 13035-5 and EN 13035-6“). 1.5 This standard does n
31、ot apply to conveyors (see EN 619) and fans as used as integral parts of the machinery. If there are specific risks that arise in connection with flat glass cutting machines, appropriate measures are specified. 1.6 This standard does not apply to cutting of laminated glass (see !EN 13035-7“). 1.7 Th
32、is standard does not apply to cutting while the glass is moving. 1.8 This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN. 2 Normative references The following referenced documents are indispensable for the application of this docu
33、ment. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text“ EN 294:1992, Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs EN 349:199
34、3, Safety of machinery - Minimum gaps to avoid crushing of parts of the human body !deleted text“ BS EN 13035-3:2003+A1:2009EN 13035-3:2003+A1:2009 (E) 5 EN 953:1997, Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards !deleted text“ EN 999
35、:1998, Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body EN 1037:1995, Safety of machinery - Prevention of unexpected start-up !deleted text“ !EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General re
36、quirements (IEC 60204-1:2005, modified) EN 61496-1:2004, Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests (IEC 61496-1:2004, modified)“ !deleted text“ !EN ISO 3744:1995, Acoustics Determination of sound power levels of noise sources using sound pressu
37、re Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) EN ISO 3746:1995, Acoustics Determination of sound power levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995) EN ISO 3747:2
38、000, Acoustics Determination of sound power levels of noise sources using sound pressure Comparison method for use in situ (ISO 3747:2000) EN ISO 4871:1996, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201:1995, Acoustics Noise e
39、mitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) EN ISO 11202:1995, Acoustics Noise emitted by machinery and equipment Measuremen
40、t of emission sound pressure levels at a work station and at other specified positions Survey method in situ (ISO 11202:1995) EN ISO 11204:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Method
41、requiring environmental corrections (ISO 11204:1995) EN ISO 11688-1:1998, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic ter
42、minology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) EN ISO 13849-1:2008, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO
43、13849-1:2006) EN ISO 13850:2008, Safety of machinery Emergency stop Principles for design (ISO 13850:2006) CLC/TS 61496-2:2006, Safety of machinery Electro-sensitive protective equipment Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-
44、2:2006)“ BS EN 13035-3:2003+A1:2009EN 13035-3:2003+A1:2009 (E) 6 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in !EN ISO 12100-1:2003“ apply. Additional terms and definitions specifically needed for this document are added below: 3.1 cutting too
45、l component for scoring the surface of flat glass 3.2 cutting head mounting assembly for moving the cutting tool vertically 3.3 carriage mounting assembly for moving the cutting head on the axis of the cutting bridge 3.4 (cutting) bridge movable horizontal guide for the carriage 3.5 cutting table su
46、pporting surface on which the flat glass is placed to be scored 3.6 longitudinal sides (of the table) edges (of the table) parallel to the direction of the travel of the cutting bridge 3.7 small sides (of the table) edges (of the table) transverse to the direction of the travel of the cutting bridge
47、 3.8 transport device equipment for the horizontal moving of the flat glass sheets on the cutting table 3.9 air cushion bed of air with a pressure higher than atmospheric between the surface of the table and the sheet of glass to lower friction during horizontal transport of the glass 3.10 movable p
48、ositioning stop mechanical device which can be brought to a place higher than the surface of the table to hold the flat glass in place for cutting and which can be retracted 3.11 energy chain composition of links supporting and guarding flexible cables and hoses 4 List of significant hazards This cl
49、ause contains all the significant hazards, hazardous situations and events, as far as they are dealt with in this standard, identified by risk assessment as significant for this type of machinery and which require action to eliminate or reduce the risk. In annex I (informative) some danger zones on cutting machines are presented graphically. Before using the standard it is important to carry out a general
